[Tue May 1 13:42:57 2012] Detection parameters: Position = (371.3, 326.5) = 3 55 4.19 31 3 36.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 173.2 +/- 30.1 Background counts = 376.1 Rate = 0.002 +/- 0.0003 [Tue May 1 13:42:58 2012] Off-axis axis estimate = 5.66' [Wed May 2 15:32:37 2012] Using EEF radius (= 9.26 ")to estimate initial spatial extent for simple fitting [Wed May 2 15:32:37 2012] Initial guess for spatial extent in simple fitting = 9.26" [Wed May 2 15:32:37 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.905 [Wed May 2 15:32:37 2012] Giving source the simple spatial ID 68 for pass 0, mean size = 9.26" [Sun May 6 17:57:19 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src68.ximg exists [Sun May 6 17:57:19 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src68_1.ximg exists [Sun May 6 17:57:19 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src68 appears to have run properly [Sun May 6 17:57:21 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src68.ximg exists [Sun May 6 17:57:21 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists [Sun May 6 17:57:21 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src68 appears to have run properly [Tue May 8 21:21:49 2012] Spatial fit model total counts = 6179.900000, observed total counts = 6161.000000 [Tue May 8 21:21:49 2012] Offset between fit and detection position for source 85 = 3.343539 pixels [Tue May 8 21:21:49 2012] Warning, changing simple spatial fit ID from 68 to 47 [Tue May 8 21:21:49 2012] 5718.124000 total counts/ 5177.420000 bgd. counts: snr = 7.514548 Spatial fit parameters: Offset between fit and detection position for source 85 = 3.343539 pixels Position = (368.4, 328.2) = 3 55 5.16 31 3 48.8 Extent = 17.9 (17.8-35.7)", rotation angle = 0 Source counts = 540.7 +/- 75.6 Background counts = 5177.4 Rate = 0.004 +/- 0.0006 [Tue May 8 21:21:49 2012] Vigneting correction estimate = 1.000000 [Tue May 8 21:21:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 8 21:21:49 2012] Assessing source extent using major axis lower bound [Tue May 8 21:21:49 2012] Source does appear to be extended [Tue May 8 21:21:49 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 8 21:21:49 2012] Source is confused with source 58 [Fri May 11 06:52:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Fri May 11 06:52:18 2012] Initial guess for spatial extent in simple fitting = 17.86" [Fri May 11 06:52:18 2012] source mask rpix=4.1, npix_max = 84, mask sum = 81, frac = 0.954 [Fri May 11 06:52:18 2012] Giving source the simple spatial ID 64 for pass 1, mean size = 17.86" [Tue May 15 23:16:59 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src64.ximg exists [Tue May 15 23:16:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src64.csv [Tue May 15 23:16:59 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src64_1.ximg exists [Tue May 15 23:16:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src64.csv [Tue May 15 23:16:59 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src64_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 15 23:17:01 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src64.ximg exists [Tue May 15 23:17:01 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists [Tue May 15 23:17:01 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src64 appears to have run properly