[Tue May  1 13:42:57 2012] Detection parameters:
  Position = (298.8, 339.4) = 3 55 28.71 31 4 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 211.7 +/- 35.7
  Background counts = 394.2
  Rate = 0.002 +/- 0.0003

[Tue May  1 13:42:58 2012] Off-axis axis estimate = 2.97'
[Wed May  2 15:32:37 2012] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Wed May  2 15:32:37 2012] Initial guess for spatial extent in simple fitting = 7.91"
[Wed May  2 15:32:37 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.744
[Wed May  2 15:32:37 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 7.91"
[Sun May  6 17:57:19 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src59.ximg exists
[Sun May  6 17:57:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src59.csv
[Sun May  6 17:57:19 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src59_1.ximg exists
[Sun May  6 17:57:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src59.csv
[Sun May  6 17:57:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 17:57:21 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Sun May  6 17:57:21 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Sun May  6 17:57:21 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Tue May  8 21:21:49 2012] Spatial fit model total counts = 4396.180000, observed total counts = 14071.000000
[Tue May  8 21:21:49 2012] Poor agreement between spatial fit and data for source 82
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  8 21:21:49 2012] Warning, spatial fit 59 centroid is now closest to src. 11
[Tue May  8 21:21:49 2012] Source 82 is offset by -3.788682 and -7.845581 pixels which is larger than
2 X fitted extent = 0.975306 x 0.975306, not incorporating fit results
[Tue May  8 21:21:49 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:21:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:21:49 2012] Assessing source extent using major
[Tue May  8 21:21:49 2012] Source does appear to be extended
[Tue May  8 21:21:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 21:21:49 2012] Source is confused with source 11
[Fri May 11 06:52:18 2012] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Fri May 11 06:52:18 2012] Initial guess for spatial extent in simple fitting = 7.91"
[Fri May 11 06:52:18 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.744
[Fri May 11 06:52:18 2012] Giving source the simple spatial ID 57 for pass 1, mean size = 7.91"
[Tue May 15 23:16:59 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src57.ximg exists
[Tue May 15 23:16:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src57.csv
[Tue May 15 23:16:59 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src57_1.ximg exists
[Tue May 15 23:16:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src57.csv
[Tue May 15 23:16:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 23:17:01 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Tue May 15 23:17:01 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Tue May 15 23:17:01 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly