[Tue May  1 13:42:56 2012] Detection parameters:
  Position = (282.7, 275.1) = 3 55 34.16 30 59 58.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 231.9 +/- 33.9
  Background counts = 420.9
  Rate = 0.002 +/- 0.0003

[Tue May  1 13:42:58 2012] Off-axis axis estimate = 2.04'
[Wed May  2 15:32:37 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Wed May  2 15:32:37 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Wed May  2 15:32:37 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.817
[Wed May  2 15:32:37 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 7.45"
[Sun May  6 17:57:19 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src54.ximg exists
[Sun May  6 17:57:19 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src54_1.ximg exists
[Sun May  6 17:57:19 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src54 appears to have run properly
[Sun May  6 17:57:21 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Sun May  6 17:57:21 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Sun May  6 17:57:21 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Tue May  8 21:21:49 2012] Spatial fit model total counts = 5748.610000, observed total counts = 5739.000000
[Tue May  8 21:21:49 2012] Offset between fit and detection position for source 70 = 5.601671 pixels
[Tue May  8 21:21:49 2012] 5900.348000 total counts/ 5040.570000 bgd. counts: snr = 12.110066
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 5.601671 pixels
  Position = (278.1, 271.9) = 3 55 35.72 30 59 44.0
  Extent = 14.9 (13.7-29.8)" x 14.9 (14.9-29.8)", rotation angle = 238
  Source counts = 859.8 +/- 76.8
  Background counts = 5040.6
  Rate = 0.007 +/- 0.0006
[Tue May  8 21:21:49 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:21:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:21:49 2012] Assessing source extent using major axis lower bound
[Tue May  8 21:21:49 2012] Source does appear to be extended
[Tue May  8 21:21:49 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.46
[Fri May 11 06:52:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 11 06:52:18 2012] Initial guess for spatial extent in simple fitting = 14.90"
[Fri May 11 06:52:18 2012] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.039
[Fri May 11 06:52:18 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 14.90"
[Tue May 15 23:16:59 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src52.ximg exists
[Tue May 15 23:16:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src52.csv
[Tue May 15 23:16:59 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src52_1.ximg exists
[Tue May 15 23:16:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src52.csv
[Tue May 15 23:16:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 23:17:01 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Tue May 15 23:17:01 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Tue May 15 23:17:01 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly