[Tue May  1 13:42:55 2012] Detection parameters:
  Position = (353.6, 484.1) = 3 55 10.14 31 15 7.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 140.4 +/- 21.2
  Background counts = 86.0
  Rate = 0.001 +/- 0.0002

[Tue May  1 13:42:58 2012] Off-axis axis estimate = 14.04'
[Wed May  2 15:32:37 2012] Using EEF radius (= 13.45 ")to estimate initial spatial extent for simple fitting
[Wed May  2 15:32:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  2 15:32:37 2012] Initial guess for spatial extent in simple fitting = 13.45"
[Wed May  2 15:32:37 2012] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.085
[Wed May  2 15:32:37 2012] Giving source the simple spatial ID 84 for pass 0, mean size = 13.45"
[Sun May  6 17:57:19 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src84.ximg exists
[Sun May  6 17:57:19 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src84_1.ximg exists
[Sun May  6 17:57:19 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src84 appears to have run properly
[Sun May  6 17:57:22 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src84.ximg exists
[Sun May  6 17:57:22 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src84_1.ximg exists
[Sun May  6 17:57:22 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src84 appears to have run properly
[Tue May  8 21:21:49 2012] Spatial fit model total counts = 1543.010000, observed total counts = 1539.000000
[Tue May  8 21:21:49 2012] Offset between fit and detection position for source 64 = 0.740160 pixels
[Tue May  8 21:21:49 2012] 1467.098000 total counts/ 1335.460000 bgd. counts: snr = 3.602184
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 0.740160 pixels
  Position = (353.1, 484.6) = 3 55 10.31 31 15 9.3
  Extent = 9.5 (7.1-14.9)", rotation angle = 0
  Source counts = 131.6 +/- 38.3
  Background counts = 1335.5
  Rate = 0.001 +/- 0.0003
[Tue May  8 21:21:49 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:21:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:21:49 2012] Assessing source extent using major axis lower bound
[Tue May  8 21:21:49 2012] Source does appear to be extended
[Tue May  8 21:21:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 06:52:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 11 06:52:18 2012] Initial guess for spatial extent in simple fitting = 9.54"
[Fri May 11 06:52:18 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.033
[Fri May 11 06:52:18 2012] Giving source the simple spatial ID 77 for pass 1, mean size = 9.54"
[Tue May 15 23:17:00 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src77.ximg exists
[Tue May 15 23:17:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src77.csv
[Tue May 15 23:17:00 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src77_1.ximg exists
[Tue May 15 23:17:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src77.csv
[Tue May 15 23:17:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 23:17:02 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Tue May 15 23:17:02 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Tue May 15 23:17:02 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src77 appears to have run properly