[Tue May  1 13:42:54 2012] Detection parameters:
  Position = (206.1, 298.1) = 3 56 0.08 31 1 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 188.5 +/- 22.7
  Background counts = 118.6
  Rate = 0.003 +/- 0.0003

[Tue May  1 13:42:58 2012] Off-axis axis estimate = 6.69'
[Wed May  2 15:32:37 2012] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Wed May  2 15:32:37 2012] Initial guess for spatial extent in simple fitting = 9.77"
[Wed May  2 15:32:37 2012] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.193
[Wed May  2 15:32:37 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 9.77"
[Sun May  6 17:57:18 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src48.ximg exists
[Sun May  6 17:57:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src48.csv
[Sun May  6 17:57:19 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src48_1.ximg exists
[Sun May  6 17:57:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src48.csv
[Sun May  6 17:57:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 17:57:21 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Sun May  6 17:57:21 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Sun May  6 17:57:21 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Tue May  8 21:21:49 2012] Spatial fit model total counts = 1257.000000, observed total counts = 1257.000000
[Tue May  8 21:21:49 2012] Offset between fit and detection position for source 59 = 0.058961 pixels
[Tue May  8 21:21:49 2012] 1266.880000 total counts/ 1121.930000 bgd. counts: snr = 4.327483
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 0.058961 pixels
  Position = (206.1, 298.1) = 3 56 0.10 31 1 37.7
  Extent = 6.1 (4.8-8.4)", rotation angle = 0
  Source counts = 144.9 +/- 35.6
  Background counts = 1121.9
  Rate = 0.001 +/- 0.0003
[Tue May  8 21:21:49 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:21:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:21:49 2012] Assessing source extent using major axis lower bound
[Tue May  8 21:21:49 2012] Source does appear to be extended
[Tue May  8 21:21:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 06:52:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 11 06:52:18 2012] Initial guess for spatial extent in simple fitting = 6.11"
[Fri May 11 06:52:18 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.102
[Fri May 11 06:52:18 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 6.11"
[Tue May 15 23:16:59 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src47.ximg exists
[Tue May 15 23:16:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src47.csv
[Tue May 15 23:16:59 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src47_1.ximg exists
[Tue May 15 23:16:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src47.csv
[Tue May 15 23:16:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 23:17:01 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Tue May 15 23:17:01 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Tue May 15 23:17:01 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly