[Tue May  1 13:42:54 2012] Detection parameters:
  Position = (359.5, 344.1) = 3 55 8.17 31 5 6.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 271.4 +/- 26.9
  Background counts = 389.5
  Rate = 0.003 +/- 0.0003

[Tue May  1 13:42:58 2012] Off-axis axis estimate = 5.53'
[Wed May  2 15:32:37 2012] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Wed May  2 15:32:37 2012] Initial guess for spatial extent in simple fitting = 9.19"
[Wed May  2 15:32:37 2012] source mask rpix=2.1, npix_max = 27, mask sum = 21, frac = 0.769
[Wed May  2 15:32:37 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 9.19"
[Sun May  6 17:57:18 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src41.ximg exists
[Sun May  6 17:57:18 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src41_1.ximg exists
[Sun May  6 17:57:18 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src41 appears to have run properly
[Sun May  6 17:57:20 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sun May  6 17:57:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src41.csv
[Sun May  6 17:57:20 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sun May  6 17:57:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src41.csv
[Sun May  6 17:57:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 21:21:49 2012] Warning, spatial fit 41 centroid is now closest to src. 83
[Tue May  8 21:21:49 2012] Spatial fit model total counts = 4106.160000, observed total counts = 4066.000000
[Tue May  8 21:21:49 2012] Offset between fit and detection position for source 55 = 1.047323 pixels
[Tue May  8 21:21:49 2012] Warning, changing simple spatial fit ID from 41 to 83
[Tue May  8 21:21:49 2012] 3981.806000 total counts/ 3809.140000 bgd. counts: snr = 2.797650
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 1.047323 pixels
  Position = (358.4, 344.1) = 3 55 8.53 31 4 58.1
  Extent = 7.5 (5.4-10.7)", rotation angle = 0
  Source counts = 172.7 +/- 63.1
  Background counts = 3809.1
  Rate = 0.001 +/- 0.0005
[Tue May  8 21:21:49 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:21:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:21:49 2012] Assessing source extent using major axis lower bound
[Tue May  8 21:21:49 2012] Source does appear to be extended
[Tue May  8 21:21:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 06:52:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 11 06:52:18 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Fri May 11 06:52:18 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.002
[Fri May 11 06:52:18 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 7.54"
[Tue May 15 23:16:59 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src40.ximg exists
[Tue May 15 23:16:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src40.csv
[Tue May 15 23:16:59 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src40_1.ximg exists
[Tue May 15 23:16:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src40.csv
[Tue May 15 23:16:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 23:17:01 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Tue May 15 23:17:01 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Tue May 15 23:17:01 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly