[Tue May  1 13:42:46 2012] Detection parameters:
  Position = (297.2, 322.1) = 3 55 29.27 31 3 20.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6995.2 +/- 120.9
  Background counts = 526.1
  Rate = 0.07 +/- 0.001

[Tue May  1 13:42:58 2012] Off-axis axis estimate = 1.72'
[Wed May  2 15:32:37 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed May  2 15:32:37 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Wed May  2 15:32:37 2012] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.740
[Wed May  2 15:32:37 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.29"
[Sun May  6 17:57:18 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src5.ximg exists
[Sun May  6 17:57:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src5.csv
[Sun May  6 17:57:18 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun May  6 17:57:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src5.csv
[Sun May  6 17:57:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 17:57:19 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun May  6 17:57:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun May  6 17:57:19 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun May  6 17:57:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun May  6 17:57:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 21:21:49 2012] Source 5 is offset by -3.457668 and -7.160035 pixels which is larger than
2 X fitted extent = 2.298566 x 2.298566, not incorporating fit results
[Tue May  8 21:21:49 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:21:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:21:49 2012] Assessing source extent using major
[Tue May  8 21:21:49 2012] Source does appear to be extended
[Tue May  8 21:21:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 21:21:49 2012] Source is confused with source 3
[Fri May 11 06:52:18 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri May 11 06:52:18 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri May 11 06:52:18 2012] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.740
[Fri May 11 06:52:18 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.29"
[Tue May 15 23:16:57 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src5.ximg exists
[Tue May 15 23:16:57 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue May 15 23:16:57 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src5 appears to have run properly
[Tue May 15 23:17:00 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue May 15 23:17:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue May 15 23:17:00 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue May 15 23:17:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue May 15 23:17:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes