[Tue May  1 13:42:52 2012] Detection parameters:
  Position = (456.7, 361.7) = 3 54 35.26 31 6 13.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 225.6 +/- 23.2
  Background counts = 114.9
  Rate = 0.004 +/- 0.0004

[Tue May  1 13:42:58 2012] Off-axis axis estimate = 12.35'
[Wed May  2 15:32:37 2012] Using EEF radius (= 12.61 ")to estimate initial spatial extent for simple fitting
[Wed May  2 15:32:37 2012] Initial guess for spatial extent in simple fitting = 12.61"
[Wed May  2 15:32:37 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.061
[Wed May  2 15:32:37 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 12.61"
[Sun May  6 17:57:18 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src38.ximg exists
[Sun May  6 17:57:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src38.csv
[Sun May  6 17:57:18 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src38_1.ximg exists
[Sun May  6 17:57:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src38.csv
[Sun May  6 17:57:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 17:57:20 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Sun May  6 17:57:20 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Sun May  6 17:57:20 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Tue May  8 21:21:49 2012] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 15.009583 pixels away
[Tue May  8 21:21:49 2012] Source 42 is offset by 6.755754 and 0.789811 pixels which is larger than
2 X fitted extent = 1.364046 x 1.364046, not incorporating fit results
[Tue May  8 21:21:49 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:21:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:21:49 2012] Assessing source extent using major
[Tue May  8 21:21:49 2012] Source does appear to be extended
[Tue May  8 21:21:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 06:52:18 2012] Using EEF radius (= 12.61 ")to estimate initial spatial extent for simple fitting
[Fri May 11 06:52:18 2012] Initial guess for spatial extent in simple fitting = 12.61"
[Fri May 11 06:52:18 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.061
[Fri May 11 06:52:18 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 12.61"
[Tue May 15 23:16:58 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src37.ximg exists
[Tue May 15 23:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src37.csv
[Tue May 15 23:16:58 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src37_1.ximg exists
[Tue May 15 23:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src37.csv
[Tue May 15 23:16:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 23:17:01 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Tue May 15 23:17:01 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Tue May 15 23:17:01 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly