[Tue May  1 13:42:51 2012] Detection parameters:
  Position = (304.3, 269.1) = 3 55 26.86 30 59 32.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 458.3 +/- 42.2
  Background counts = 492.9
  Rate = 0.004 +/- 0.0004

[Tue May  1 13:42:58 2012] Off-axis axis estimate = 2.17'
[Wed May  2 15:32:37 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Wed May  2 15:32:37 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Wed May  2 15:32:37 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.008
[Wed May  2 15:32:37 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 7.51"
[Sun May  6 17:57:18 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src35.ximg exists
[Sun May  6 17:57:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src35.csv
[Sun May  6 17:57:18 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src35_1.ximg exists
[Sun May  6 17:57:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src35.csv
[Sun May  6 17:57:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 17:57:20 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Sun May  6 17:57:20 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Sun May  6 17:57:20 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Tue May  8 21:21:49 2012] Warning, spatial fit 35 centroid is now closest to src. 56
[Tue May  8 21:21:49 2012] Spatial fit model total counts = 5835.570000, observed total counts = 5817.000000
[Tue May  8 21:21:49 2012] Offset between fit and detection position for source 40 = 2.613981 pixels
[Tue May  8 21:21:49 2012] Warning, changing simple spatial fit ID from 35 to 44
[Tue May  8 21:21:49 2012] 5641.006000 total counts/ 5104.620000 bgd. counts: snr = 7.507507
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 2.613981 pixels
  Position = (305.9, 267.0) = 3 55 26.33 30 59 22.6
  Extent = 15.6 (13.5-31.2)" x 9.5 (7.0-12.1)", rotation angle = 90 (78-90) degrees
  Source counts = 536.4 +/- 75.1
  Background counts = 5104.6
  Rate = 0.004 +/- 0.0006
[Tue May  8 21:21:49 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:21:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:21:49 2012] Assessing source extent using major axis lower bound
[Tue May  8 21:21:49 2012] Source does appear to be extended
[Tue May  8 21:21:49 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.11
[Tue May  8 21:21:49 2012] Source is confused with source 56
[Fri May 11 06:52:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 11 06:52:18 2012] Initial guess for spatial extent in simple fitting = 12.53"
[Fri May 11 06:52:18 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.918
[Fri May 11 06:52:18 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 12.53"
[Tue May 15 23:16:58 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src35.ximg exists
[Tue May 15 23:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src35.csv
[Tue May 15 23:16:58 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src35_1.ximg exists
[Tue May 15 23:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src35.csv
[Tue May 15 23:16:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 23:17:01 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Tue May 15 23:17:01 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Tue May 15 23:17:01 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly