[Tue May  1 13:42:50 2012] Detection parameters:
  Position = (193.8, 395.8) = 3 56 4.29 31 8 43.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 188.0 +/- 21.7
  Background counts = 98.0
  Rate = 0.002 +/- 0.0002

[Tue May  1 13:42:58 2012] Off-axis axis estimate = 10.36'
[Wed May  2 15:32:37 2012] Using EEF radius (= 11.61 ")to estimate initial spatial extent for simple fitting
[Wed May  2 15:32:37 2012] Initial guess for spatial extent in simple fitting = 11.61"
[Wed May  2 15:32:37 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.896
[Wed May  2 15:32:37 2012] Giving source the simple spatial ID 70 for pass 0, mean size = 11.61"
[Sun May  6 17:57:19 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src70.ximg exists
[Sun May  6 17:57:19 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src70_1.ximg exists
[Sun May  6 17:57:19 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src70 appears to have run properly
[Sun May  6 17:57:21 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Sun May  6 17:57:21 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Sun May  6 17:57:21 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src70 appears to have run properly
[Tue May  8 21:21:49 2012] Spatial fit model total counts = 1011.660000, observed total counts = 1010.000000
[Tue May  8 21:21:49 2012] Offset between fit and detection position for source 30 = 0.272326 pixels
[Tue May  8 21:21:49 2012] 1011.644000 total counts/ 879.827000 bgd. counts: snr = 4.443987
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.272326 pixels
  Position = (193.7, 395.6) = 3 56 4.33 31 8 41.6
  Extent = 8.1 (6.3-10.4)", rotation angle = 118 (110-129) degrees
  Source counts = 131.8 +/- 31.8
  Background counts = 879.8
  Rate = 0.001 +/- 0.0003
[Tue May  8 21:21:49 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:21:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:21:49 2012] Assessing source extent using major axis lower bound
[Tue May  8 21:21:49 2012] Source does appear to be extended
[Tue May  8 21:21:49 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.57
[Tue May  8 21:21:49 2012] Source is asymmetric
[Fri May 11 06:52:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 11 06:52:18 2012] Initial guess for spatial extent in simple fitting = 5.50"
[Fri May 11 06:52:18 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.722
[Fri May 11 06:52:18 2012] Giving source the simple spatial ID 65 for pass 1, mean size = 5.50"
[Tue May 15 23:16:59 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src65.ximg exists
[Tue May 15 23:16:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src65.csv
[Tue May 15 23:16:59 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src65_1.ximg exists
[Tue May 15 23:16:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src65.csv
[Tue May 15 23:16:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 23:17:01 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Tue May 15 23:17:01 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Tue May 15 23:17:01 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly