[Tue May  1 13:42:49 2012] Detection parameters:
  Position = (373.2, 300.6) = 3 55 3.54 31 1 49.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 981.0 +/- 46.7
  Background counts = 374.9
  Rate = 0.01 +/- 0.0005

[Tue May  1 13:42:58 2012] Off-axis axis estimate = 5.42'
[Wed May  2 15:32:37 2012] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Wed May  2 15:32:37 2012] Initial guess for spatial extent in simple fitting = 9.14"
[Wed May  2 15:32:37 2012] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.887
[Wed May  2 15:32:37 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 9.14"
[Sun May  6 17:57:18 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src20.ximg exists
[Sun May  6 17:57:18 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src20_1.ximg exists
[Sun May  6 17:57:18 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src20 appears to have run properly
[Sun May  6 17:57:20 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sun May  6 17:57:20 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sun May  6 17:57:20 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Tue May  8 21:21:49 2012] Spatial fit model total counts = 6219.420000, observed total counts = 6287.000000
[Tue May  8 21:21:49 2012] Offset between fit and detection position for source 24 = 1.540291 pixels
[Tue May  8 21:21:49 2012] 5623.660000 total counts/ 4603.010000 bgd. counts: snr = 15.043742
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 1.540291 pixels
  Position = (374.8, 300.4) = 3 55 3.02 31 1 47.6
  Extent = 16.3" x 4.2", rotation angle = 14
  Source counts = 1020.6 +/- 75.0
  Background counts = 4603.0
  Rate = 0.008 +/- 0.0006
[Tue May  8 21:21:49 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:21:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:21:49 2012] Assessing source extent using major
[Tue May  8 21:21:49 2012] Source does appear to be extended
[Tue May  8 21:21:49 2012] Computing asymmetry using major and minor axis, asym = 3.86
[Tue May  8 21:21:49 2012] Source is asymmetric
[Tue May  8 21:21:49 2012] Source is confused with source 25
[Tue May  8 21:21:49 2012] Source is confused with source 26
[Fri May 11 06:52:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 11 06:52:18 2012] Initial guess for spatial extent in simple fitting = 10.28"
[Fri May 11 06:52:18 2012] source mask rpix=2.4, npix_max = 32, mask sum = 34, frac = 1.037
[Fri May 11 06:52:18 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 10.28"
[Tue May 15 23:16:58 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src20.ximg exists
[Tue May 15 23:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src20.csv
[Tue May 15 23:16:58 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src20_1.ximg exists
[Tue May 15 23:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src20.csv
[Tue May 15 23:16:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 23:17:00 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Tue May 15 23:17:00 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Tue May 15 23:17:00 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly