[Tue May  1 13:42:48 2012] Detection parameters:
  Position = (268.7, 323.8) = 3 55 38.92 31 3 30.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 944.0 +/- 48.9
  Background counts = 360.6
  Rate = 0.009 +/- 0.0005

[Tue May  1 13:42:58 2012] Off-axis axis estimate = 2.84'
[Wed May  2 15:32:37 2012] Using EEF radius (= 7.85 ")to estimate initial spatial extent for simple fitting
[Wed May  2 15:32:37 2012] Initial guess for spatial extent in simple fitting = 7.85"
[Wed May  2 15:32:37 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.942
[Wed May  2 15:32:37 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 7.85"
[Sun May  6 17:57:18 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src21.ximg exists
[Sun May  6 17:57:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src21.csv
[Sun May  6 17:57:18 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun May  6 17:57:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src21.csv
[Sun May  6 17:57:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 17:57:20 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun May  6 17:57:20 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun May  6 17:57:20 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Tue May  8 21:21:49 2012] Warning, spatial fit 21 centroid is now closest to src. 18
[Tue May  8 21:21:49 2012] Spatial fit model total counts = 5740.660000, observed total counts = 5739.000000
[Tue May  8 21:21:49 2012] Offset between fit and detection position for source 20 = 1.147461 pixels
[Tue May  8 21:21:49 2012] Warning, changing simple spatial fit ID from 21 to 23
[Tue May  8 21:21:49 2012] 4873.290000 total counts/ 3214.190000 bgd. counts: snr = 29.264209
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 1.147461 pixels
  Position = (267.5, 323.8) = 3 55 39.31 31 3 29.7
  Extent = 12.6 (11.3-13.9)", rotation angle = 0
  Source counts = 1659.1 +/- 69.8
  Background counts = 3214.2
  Rate = 0.01 +/- 0.0006
[Tue May  8 21:21:49 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:21:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:21:49 2012] Assessing source extent using major axis lower bound
[Tue May  8 21:21:49 2012] Source does appear to be extended
[Tue May  8 21:21:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 21:21:49 2012] Source is confused with source 22
[Fri May 11 06:52:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 11 06:52:18 2012] Initial guess for spatial extent in simple fitting = 12.61"
[Fri May 11 06:52:18 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.061
[Fri May 11 06:52:18 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 12.61"
[Tue May 15 23:16:58 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src21.ximg exists
[Tue May 15 23:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src21.csv
[Tue May 15 23:16:58 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src21_1.ximg exists
[Tue May 15 23:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src21.csv
[Tue May 15 23:16:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 23:17:00 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Tue May 15 23:17:00 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Tue May 15 23:17:00 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly