[Tue May  1 13:42:48 2012] Detection parameters:
  Position = (248.2, 328.2) = 3 55 45.86 31 3 49.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 937.9 +/- 44.3
  Background counts = 236.9
  Rate = 0.01 +/- 0.0005

[Tue May  1 13:42:58 2012] Off-axis axis estimate = 4.23'
[Wed May  2 15:32:37 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Wed May  2 15:32:37 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Wed May  2 15:32:37 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.029
[Wed May  2 15:32:37 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 8.55"
[Sun May  6 17:57:18 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src14.ximg exists
[Sun May  6 17:57:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src14.csv
[Sun May  6 17:57:18 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src14_1.ximg exists
[Sun May  6 17:57:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src14.csv
[Sun May  6 17:57:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 17:57:20 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sun May  6 17:57:20 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sun May  6 17:57:20 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Tue May  8 21:21:49 2012] Spatial fit model total counts = 3421.200000, observed total counts = 3261.000000
[Tue May  8 21:21:49 2012] Offset between fit and detection position for source 17 = 0.593881 pixels
[Tue May  8 21:21:49 2012] 3453.130000 total counts/ 2297.250000 bgd. counts: snr = 24.116186
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.593881 pixels
  Position = (248.8, 328.2) = 3 55 45.66 31 3 48.7
  Extent = 10.0 (8.8-11.2)", rotation angle = 0
  Source counts = 1155.9 +/- 58.8
  Background counts = 2297.2
  Rate = 0.01 +/- 0.0005
[Tue May  8 21:21:49 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:21:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:21:49 2012] Assessing source extent using major axis lower bound
[Tue May  8 21:21:49 2012] Source does appear to be extended
[Tue May  8 21:21:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 21:21:49 2012] Source is confused with source 18
[Tue May  8 21:21:49 2012] Source is confused with source 35
[Fri May 11 06:52:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 11 06:52:18 2012] Initial guess for spatial extent in simple fitting = 9.97"
[Fri May 11 06:52:18 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.155
[Fri May 11 06:52:18 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 9.97"
[Tue May 15 23:16:58 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src14.ximg exists
[Tue May 15 23:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src14.csv
[Tue May 15 23:16:58 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src14_1.ximg exists
[Tue May 15 23:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src14.csv
[Tue May 15 23:16:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 23:17:00 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Tue May 15 23:17:00 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Tue May 15 23:17:00 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly