[Tue May  1 13:42:47 2012] Detection parameters:
  Position = (294.5, 336.3) = 3 55 30.17 31 4 20.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2536.7 +/- 72.6
  Background counts = 393.9
  Rate = 0.02 +/- 0.0007

[Tue May  1 13:42:58 2012] Off-axis axis estimate = 2.76'
[Wed May  2 15:32:37 2012] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting
[Wed May  2 15:32:37 2012] Initial guess for spatial extent in simple fitting = 7.81"
[Wed May  2 15:32:37 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.949
[Wed May  2 15:32:37 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.81"
[Sun May  6 17:57:18 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src10.ximg exists
[Sun May  6 17:57:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src10.csv
[Sun May  6 17:57:18 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun May  6 17:57:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src10.csv
[Sun May  6 17:57:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 17:57:20 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun May  6 17:57:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun May  6 17:57:20 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun May  6 17:57:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun May  6 17:57:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 21:21:49 2012] Warning, spatial fit 10 centroid is now closest to src. 82
[Tue May  8 21:21:49 2012] Spatial fit model total counts = 7834.740000, observed total counts = 7857.000000
[Tue May  8 21:21:49 2012] Offset between fit and detection position for source 11 = 1.812610 pixels
[Tue May  8 21:21:49 2012] Warning, changing simple spatial fit ID from 10 to 18
[Tue May  8 21:21:49 2012] 7234.320000 total counts/ 5715.140000 bgd. counts: snr = 20.095360
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.812610 pixels
  Position = (295.2, 334.6) = 3 55 29.96 31 4 16.9
  Extent = 5.3 (5.0-5.6)", rotation angle = 0
  Source counts = 1519.2 +/- 85.1
  Background counts = 5715.1
  Rate = 0.01 +/- 0.0007
[Tue May  8 21:21:49 2012] Spatial fit model total counts = 13685.900000, observed total counts = 13833.000000
[Tue May  8 21:21:49 2012] Offset between fit and detection position for source 11 = 1.754500 pixels
[Tue May  8 21:21:49 2012] Warning, changing simple spatial fit ID from 18 to 59
[Tue May  8 21:21:49 2012] 12383.090000 total counts/ 10100.000000 bgd. counts: snr = 22.717595
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.754500 pixels
  Position = (296.3, 333.3) = 3 55 29.59 31 4 10.9
  Extent = 6.4 (6.1-6.8)", rotation angle = 0
  Source counts = 2283.1 +/- 111.3
  Background counts = 10100.0
  Rate = 0.02 +/- 0.0009
[Tue May  8 21:21:49 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:21:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:21:49 2012] Assessing source extent using major axis lower bound
[Tue May  8 21:21:49 2012] Source does appear to be extended
[Tue May  8 21:21:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 21:21:49 2012] Source is confused with source 3
[Tue May  8 21:21:49 2012] Source is confused with source 82
[Fri May 11 06:52:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 11 06:52:18 2012] Initial guess for spatial extent in simple fitting = 6.44"
[Fri May 11 06:52:18 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.019
[Fri May 11 06:52:18 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 6.44"
[Tue May 15 23:16:58 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src10.ximg exists
[Tue May 15 23:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src10.csv
[Tue May 15 23:16:58 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue May 15 23:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src10.csv
[Tue May 15 23:16:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 23:17:00 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue May 15 23:17:00 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue May 15 23:17:00 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly