[Tue May  1 13:42:46 2012] Detection parameters:
  Position = (315.9, 311.1) = 3 55 22.93 31 2 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 593128.6 +/- 971.9
  Background counts = 659.0
  Rate = 5 +/- 0.008

[Tue May  1 13:42:58 2012] Off-axis axis estimate = 1.57'
[Wed May  2 15:32:37 2012] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Wed May  2 15:32:37 2012] Initial guess for spatial extent in simple fitting = 7.21"
[Wed May  2 15:32:37 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.859
[Wed May  2 15:32:37 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.21"
[Sun May  6 17:57:17 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src1.ximg exists
[Sun May  6 17:57:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src1.csv
[Sun May  6 17:57:17 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May  6 17:57:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src1.csv
[Sun May  6 17:57:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 17:57:19 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May  6 17:57:19 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May  6 17:57:19 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue May  8 21:21:49 2012] Spatial fit model total counts = 1315380.000000, observed total counts = 1362698.000000
[Tue May  8 21:21:49 2012] Offset between fit and detection position for source 1 = 1.600199 pixels
[Tue May  8 21:21:49 2012] 1290580.000000 total counts/ 25600.000000 bgd. counts: snr = 7906.125000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.600199 pixels
  Position = (315.9, 312.7) = 3 55 22.96 31 2 41.5
  Extent = 14.4 (14.4-28.8)", rotation angle = 0
  Source counts = 1264980.0 +/- 1136.0
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.009
[Tue May  8 21:21:49 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:21:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:21:49 2012] Assessing source extent using major axis lower bound
[Tue May  8 21:21:49 2012] Source does appear to be extended
[Tue May  8 21:21:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 21:21:49 2012] Source is confused with source 4
[Tue May  8 21:21:49 2012] Source is confused with source 3
[Fri May 11 06:52:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 11 06:52:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 11 06:52:18 2012] Initial guess for spatial extent in simple fitting = 14.42"
[Fri May 11 06:52:18 2012] source mask rpix=3.3, npix_max = 58, mask sum = 54, frac = 0.927
[Fri May 11 06:52:18 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.42"
[Tue May 15 23:16:57 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 15 23:16:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src1.csv
[Tue May 15 23:16:57 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 15 23:16:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src1.csv
[Tue May 15 23:16:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 23:17:00 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 15 23:17:00 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 15 23:17:00 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly