[Wed Jun 27 15:51:22 2012] Detection parameters: Position = (277.5, 286.8) = 20 0 43.56 22 42 35.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 9331.6 +/- 114.9 Background counts = 45.6 Rate = 0.3 +/- 0.004 [Wed Jun 27 15:51:23 2012] Off-axis axis estimate = 1.73' [Wed Jun 27 15:54:02 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting [Wed Jun 27 15:54:02 2012] Initial guess for spatial extent in simple fitting = 7.30" [Wed Jun 27 15:54:02 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055 [Wed Jun 27 15:54:02 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.30" [Wed Jun 27 18:31:29 2012] fullrun_pn_xmm0600970201_pi300-10000_cl_pass0_src2.ximg exists [Wed Jun 27 18:31:29 2012] fullrun_pn_xmm0600970201_pi300-10000_cl_pass0_src2_1.ximg exists [Wed Jun 27 18:31:29 2012] Fit fullrun_pn_xmm0600970201_pi300-10000_cl_pass0_src2 appears to have run properly [Wed Jun 27 18:31:30 2012] fullrun_pn_xmm0600970201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Wed Jun 27 18:31:30 2012] fullrun_pn_xmm0600970201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Wed Jun 27 18:31:30 2012] Fit fullrun_pn_xmm0600970201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly [Wed Jun 27 19:39:47 2012] Spatial fit model total counts = 9166.280000, observed total counts = 8978.000000 [Wed Jun 27 19:39:47 2012] Offset between fit and detection position for source 2 = 0.231144 pixels [Wed Jun 27 19:39:47 2012] 9174.200000 total counts/ 2280.500000 bgd. counts: snr = 144.356832 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.231144 pixels Position = (277.6, 286.6) = 20 0 43.54 22 42 35.1 Extent = 6.6 (6.4-6.8)" x 6.0 (5.8-6.1)", rotation angle = 71 (59-79) degrees Source counts = 6893.7 +/- 95.8 Background counts = 2280.5 Rate = 0.2 +/- 0.003 [Wed Jun 27 19:39:47 2012] Vigneting correction estimate = 1.000000 [Wed Jun 27 19:39:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 27 19:39:47 2012] Assessing source extent using major axis lower bound [Wed Jun 27 19:39:47 2012] Source does appear to be extended [Wed Jun 27 19:39:47 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.05 [Wed Jun 27 19:40:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Jun 27 19:40:04 2012] Initial guess for spatial extent in simple fitting = 6.27" [Wed Jun 27 19:40:04 2012] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.061 [Wed Jun 27 19:40:04 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 6.27" [Wed Jun 27 21:12:02 2012] fullrun_pn_xmm0600970201_pi300-10000_cl_pass1_src2.ximg exists [Wed Jun 27 21:12:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600970201_pi300-10000_cl_pass1_src2.csv [Wed Jun 27 21:12:02 2012] fullrun_pn_xmm0600970201_pi300-10000_cl_pass1_src2_1.ximg exists [Wed Jun 27 21:12:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600970201_pi300-10000_cl_pass1_src2.csv [Wed Jun 27 21:12:02 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0600970201_pi300-10000_cl_pass1_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0600970201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 27 21:12:02 2012] fullrun_pn_xmm0600970201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Wed Jun 27 21:12:02 2012] fullrun_pn_xmm0600970201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Wed Jun 27 21:12:02 2012] Fit fullrun_pn_xmm0600970201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly [Wed Jun 27 22:09:27 2012] Spatial fit model total counts = 9164.560000, observed total counts = 8978.000000 [Wed Jun 27 22:09:27 2012] Offset between fit and detection position for source 2 = 0.009307 pixels [Wed Jun 27 22:09:27 2012] 9171.830000 total counts/ 2286.960000 bgd. counts: snr = 143.968162 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.009307 pixels Position = (277.6, 286.6) = 20 0 43.54 22 42 35.1 Extent = 6.3 (6.2-6.4)", rotation angle = 0 Source counts = 6884.9 +/- 95.8 Background counts = 2287.0 Rate = 0.2 +/- 0.003 [Wed Jun 27 22:09:27 2012] Vigneting correction estimate = 1.000000 [Wed Jun 27 22:09:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 27 22:09:27 2012] Assessing source extent using major axis lower bound [Wed Jun 27 22:09:27 2012] Source does appear to be extended [Wed Jun 27 22:09:27 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 27 22:09:43 2012] Counts = 6884.870000, rescaling region sizes by 2.000000 [Wed Jun 27 22:09:43 2012] XMMSAS src. selection expression = ellipse(24102.379400, 24888.580200, 751.912822, 751.912822, 0.000000, X, Y) [Wed Jun 27 22:09:43 2012] Writing source region out to fullrun_pn_xmm0600970201_pi300-10000_pass1_cl_src2_src.reg [Wed Jun 27 22:09:43 2012] Extracting stamp from image fullrun_pn_xmm0600970201_pi300-10000_cl_sm2.00.img.gz, (234, 243) - (321, 330) [Wed Jun 27 22:09:43 2012] XMMSAS bgd. selection expression = annulus(24102.379400, 24888.580200, 2506.376072, 5012.752144, X, Y) && !ellipse(23875.521076, 27848.837200, 390.603211, 390.603211, 0.000000, X, Y) && !ellipse(28174.174683, 28424.610321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28636.287842, 28012.085144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25629.788422, 24295.726471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19576.863251, 30218.207397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27241.343414, 26464.588043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24428.788574, 25771.505920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23521.158844, 25501.035431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24357.795600, 22873.368600, 392.058411, 392.058411, 0.000000, X, Y) && !ellipse(20261.643097, 20022.109009, 870.000000, 870.000000, 0.000000, X, Y) [Wed Jun 27 22:09:43 2012] Writing fullrun_pn_xmm0600970201_pi300-10000_pass1_cl_src2.gif [Wed Jun 27 22:11:14 2012] Mean detx,y = (33.44, -295.59) [Wed Jun 27 22:11:21 2012] Setting backscal keywords in source and bgd. spectrum [Wed Jun 27 22:12:57 2012] Binned source spectrum to 10 counts/bin [Wed Jun 27 22:12:58 2012] Setting source spectrum file to fullrun_pn_xmm0600970201_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Wed Jun 27 22:12:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600970201_pi300-10000_pass1_cl_src2_bgd.pi.gz [Thu Jun 28 00:01:24 2012] Updating aperture counts using extracted products [Thu Jun 28 00:01:24 2012] Error reading totcts from fullrun_pn_xmm0600970201_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Thu Jun 28 00:01:24 2012] Calculating source flux in energy range 0.30-8.00 [Thu Jun 28 00:01:24 2012] Using photon index=1.80, rate=0.197, arf fullrun_pn_xmm0600970201_pi300-10000_pass1_cl_src2.arf [Thu Jun 28 00:01:24 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu Jun 28 00:01:24 2012] Updating source flux to 4.9e-13 [Thu Jun 28 00:04:11 2012] Reading fit data from xmm0600970201/analysis//spectral/fullrun_pn_xmm0600970201_pi300-10000_pass1_cl_src2_pl.csv [Thu Jun 28 00:04:11 2012] Spectral fit parameter nH value = 6.11824e+21 [Thu Jun 28 00:04:11 2012] Spectral fit parameter PhoIndex value = 7.08028 [Thu Jun 28 00:04:11 2012] Failed to get F(0.3-8.0) from xmm0600970201/analysis//spectral/fullrun_pn_xmm0600970201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected [Thu Jun 28 00:04:11 2012] Calculating source flux in energy range 0.30-8.00 [Thu Jun 28 00:04:11 2012] Using Nh = 6.1e+21, photon index=7.08, rate=0.197, arf fullrun_pn_xmm0600970201_pi300-10000_pass1_cl_src2.arf [Thu Jun 28 00:04:11 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu Jun 28 00:04:11 2012] Updating source flux to 2.7e-13