[Wed Jun 27 15:51:43 2012] Detection parameters:
  Position = (156.1, 318.9) = 20 1 21.76 22 44 56.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 177.1 +/- 17.5
  Background counts = 21.5
  Rate = 0.008 +/- 0.0008

[Wed Jun 27 15:51:43 2012] Off-axis axis estimate = 10.43'
[Wed Jun 27 18:31:30 2012] Using EEF radius (= 11.64 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 18:31:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 18:31:30 2012] Initial guess for spatial extent in simple fitting = 11.64"
[Wed Jun 27 18:31:30 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.892
[Wed Jun 27 18:31:30 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.64"
[Wed Jun 27 19:09:07 2012] fullrun_mos1_xmm0600970201_pi300-10000_cl_pass0_src2.ximg exists
[Wed Jun 27 19:09:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0600970201_pi300-10000_cl_pass0_src2.csv
[Wed Jun 27 19:09:07 2012] fullrun_mos1_xmm0600970201_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Jun 27 19:09:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0600970201_pi300-10000_cl_pass0_src2.csv
[Wed Jun 27 19:09:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600970201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600970201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 19:09:07 2012] fullrun_mos1_xmm0600970201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Jun 27 19:09:07 2012] fullrun_mos1_xmm0600970201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jun 27 19:09:07 2012] Fit fullrun_mos1_xmm0600970201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Jun 27 19:39:50 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.255087 pixels away
[Wed Jun 27 19:39:50 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 19:39:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 19:39:50 2012] Assessing source extent using major
[Wed Jun 27 19:39:50 2012] Source does appear to be extended
[Wed Jun 27 19:39:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 21:12:03 2012] Using EEF radius (= 11.64 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 21:12:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 21:12:03 2012] Initial guess for spatial extent in simple fitting = 11.64"
[Wed Jun 27 21:12:03 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.892
[Wed Jun 27 21:12:03 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.64"
[Wed Jun 27 21:35:09 2012] fullrun_mos1_xmm0600970201_pi300-10000_cl_pass1_src2.ximg exists
[Wed Jun 27 21:35:09 2012] fullrun_mos1_xmm0600970201_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Jun 27 21:35:09 2012] Fit fullrun_mos1_xmm0600970201_pi300-10000_cl_pass1_src2 appears to have run properly
[Wed Jun 27 21:35:09 2012] fullrun_mos1_xmm0600970201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Jun 27 21:35:09 2012] fullrun_mos1_xmm0600970201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Jun 27 21:35:09 2012] Fit fullrun_mos1_xmm0600970201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Jun 27 22:09:29 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.164525 pixels away
[Wed Jun 27 22:09:29 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 22:09:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 22:09:29 2012] Assessing source extent using major
[Wed Jun 27 22:09:29 2012] Source does appear to be extended
[Wed Jun 27 22:09:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 23:12:22 2012] XMMSAS src. selection expression = ellipse(13529.096802, 27695.985321, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 27 23:12:22 2012] Writing source region out to fullrun_mos1_xmm0600970201_pi300-10000_pass1_cl_src4_src.reg
[Wed Jun 27 23:12:22 2012] Extracting stamp from image fullrun_mos1_xmm0600970201_pi300-10000_cl_sm2.00.img.gz, (119, 281) - (194, 356)
[Wed Jun 27 23:12:22 2012] XMMSAS bgd. selection expression = annulus(13529.096802, 27695.985321, 1087.500000, 2175.000000, X, Y) && !ellipse(13612.227102, 26729.876360, 243.767207, 243.767207, 0.000000, X, Y)
[Wed Jun 27 23:12:22 2012] Writing fullrun_mos1_xmm0600970201_pi300-10000_pass1_cl_src4.gif
[Wed Jun 27 23:12:47 2012] Mean detx,y = (3033.36, 10303.27) 
[Wed Jun 27 23:12:47 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 23:12:58 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 23:12:58 2012] Setting source spectrum file to fullrun_mos1_xmm0600970201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jun 27 23:12:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600970201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Jun 27 23:22:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 27 23:22:59 2012] rmf not generated due to insufficient counts
[Thu Jun 28 00:01:25 2012] Updating aperture counts using extracted products
[Thu Jun 28 00:01:25 2012] Error reading totcts from fullrun_mos1_xmm0600970201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jun 28 00:01:26 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 00:01:26 2012] Using photon index=1.80, rate=0.00795, arf fullrun_mos1_xmm0600970201_pi300-10000_pass1_cl_src4.arf
[Thu Jun 28 00:01:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 00:01:26 2012] Updating source flux to 1.3e-13
[Thu Jun 28 00:01:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting