[Tue May 14 00:42:36 2013] Detection parameters:
  Position = (310.4, 319.0) = 17 3 56.79 -37 50 37.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106745.8 +/- 385.7
  Background counts = 92.4
  Rate = 3 +/- 0.009

[Tue May 14 00:42:43 2013] Off-axis axis estimate = 1.72'
[Tue May 14 00:43:35 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue May 14 00:43:35 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Tue May 14 00:43:35 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Tue May 14 00:43:35 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Tue May 14 00:43:39 2013] fullrun_pn_xmm0600950101_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 14 00:43:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600950101_pi300-10000_cl_pass0_src1.csv
[Tue May 14 00:43:40 2013] fullrun_pn_xmm0600950101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 14 00:43:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600950101_pi300-10000_cl_pass0_src1.csv
[Tue May 14 00:43:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600950101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600950101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:43:43 2013] fullrun_pn_xmm0600950101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 14 00:43:43 2013] fullrun_pn_xmm0600950101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 14 00:43:43 2013] Fit fullrun_pn_xmm0600950101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue May 14 00:44:07 2013] Spatial fit model total counts = 96071.900000, observed total counts = 95181.000000
[Tue May 14 00:44:07 2013] Offset between fit and detection position for source 1 = 0.142487 pixels
[Tue May 14 00:44:07 2013] 96427.400000 total counts/ 20720.200000 bgd. counts: snr = 525.944857
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.142487 pixels
  Position = (310.2, 318.9) = 17 3 56.84 -37 50 38.3
  Extent = 6.0 (5.9-6.0)", rotation angle = 0
  Source counts = 75707.2 +/- 310.5
  Background counts = 20720.2
  Rate = 2 +/- 0.006
[Tue May 14 00:44:07 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:44:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:44:07 2013] Assessing source extent using major axis lower bound
[Tue May 14 00:44:07 2013] Source does appear to be extended
[Tue May 14 00:44:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 00:44:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 14 00:44:35 2013] Initial guess for spatial extent in simple fitting = 5.97"
[Tue May 14 00:44:35 2013] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.140
[Tue May 14 00:44:35 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.97"
[Tue May 14 00:44:36 2013] fullrun_pn_xmm0600950101_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 14 00:44:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600950101_pi300-10000_cl_pass1_src1.csv
[Tue May 14 00:44:36 2013] fullrun_pn_xmm0600950101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 14 00:44:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600950101_pi300-10000_cl_pass1_src1.csv
[Tue May 14 00:44:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600950101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600950101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:44:37 2013] fullrun_pn_xmm0600950101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 14 00:44:37 2013] fullrun_pn_xmm0600950101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 14 00:44:37 2013] Fit fullrun_pn_xmm0600950101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue May 14 00:44:55 2013] Spatial fit model total counts = 96071.900000, observed total counts = 95181.000000
[Tue May 14 00:44:55 2013] Offset between fit and detection position for source 1 = 0.000000 pixels
[Tue May 14 00:44:55 2013] 96427.400000 total counts/ 20720.200000 bgd. counts: snr = 525.944857
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (310.2, 318.9) = 17 3 56.84 -37 50 38.3
  Extent = 6.0 (5.9-6.0)", rotation angle = 0
  Source counts = 75707.2 +/- 310.5
  Background counts = 20720.2
  Rate = 2 +/- 0.006
[Tue May 14 00:44:55 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:44:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:44:55 2013] Assessing source extent using major axis lower bound
[Tue May 14 00:44:55 2013] Source does appear to be extended
[Tue May 14 00:44:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 00:45:19 2013] Counts = 75707.200000, rescaling region sizes by 3.000000
[Tue May 14 00:45:19 2013] XMMSAS src. selection expression = ellipse(26941.301020, 27699.365600, 1075.300231, 1075.300231, 0.000000, X, Y)
[Tue May 14 00:45:19 2013] Not overwriting source region fullrun_pn_xmm0600950101_pi300-10000_pass1_cl_src1_src.reg
[Tue May 14 00:45:19 2013] Extracting stamp from image fullrun_pn_xmm0600950101_pi300-10000_cl_sm2.00.img.gz, (248, 257) - (372, 381)
[Tue May 14 00:45:19 2013] XMMSAS bgd. selection expression = annulus(26941.301020, 27699.365600, 5376.501155, 10753.002309, X, Y) && !ellipse(15776.356079, 34997.448639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16365.091568, 36646.813904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33914.937439, 34753.661194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20597.427307, 33084.486755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16562.643005, 28207.471405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25475.008179, 20979.101044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24045.152771, 20020.719101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27451.005500, 19144.515000, 979.456028, 979.456028, 0.000000, X, Y) && !ellipse(18209.847076, 18719.883514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27608.154297, 17271.034027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27638.843781, 16391.086960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19373.008774, 38569.071045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26368.125519, 35877.460754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27137.529114, 24658.740662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27324.559998, 21517.949860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27358.648540, 20577.901400, 783.442423, 783.442423, 0.000000, X, Y) && !ellipse(27531.209555, 18441.479828, 1541.240044, 355.133330, 83.937900, X, Y) && !ellipse(27562.013800, 18258.184000, 712.833621, 712.833621, 0.000000, X, Y) && !ellipse(32084.533691, 39115.043304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36683.700226, 36800.152466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24663.376343, 35487.158173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25513.460968, 33716.035919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38428.450073, 31482.038513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27768.541962, 29101.310913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27124.033600, 28998.529419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21727.686000, 29088.548000, 1390.104040, 1390.104040, 0.000000, X, Y) && !ellipse(28847.237885, 25712.144775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27120.486800, 25035.056000, 1116.928032, 397.732011, 82.634980, X, Y) && !ellipse(30897.438232, 24503.378967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27185.913960, 23709.976000, 1188.640034, 467.686413, 90.000000, X, Y) && !ellipse(27201.225922, 23442.891235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38043.476135, 22642.808777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27297.612000, 21794.896400, 776.288822, 776.288822, 0.000000, X, Y) && !ellipse(31131.216217, 21961.864120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33550.805481, 39031.019592, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 14 00:45:19 2013] Writing fullrun_pn_xmm0600950101_pi300-10000_pass1_cl_src1.gif
[Tue May 14 00:45:21 2013] ../../xmm0600950101/products/events/fullrun_pn_xmm0600950101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0600950101/products/events/fullrun_pn_xmm0600950101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue May 14 00:45:21 2013] Mean detx,y = (76.60, -233.95) 
[Tue May 14 00:45:21 2013] ../../xmm0600950101/products/images/fullrun_pn_xmm0600950101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0600950101/products/images/fullrun_pn_xmm0600950101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue May 14 00:45:21 2013] ../../xmm0600950101/products/spectra/fullrun_pn_xmm0600950101_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0600950101/products/spectra/fullrun_pn_xmm0600950101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue May 14 00:45:21 2013] Setting source spectrum file to fullrun_pn_xmm0600950101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 14 00:45:21 2013] Setting bgd. spectrum file to fullrun_pn_xmm0600950101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue May 14 00:45:21 2013] ../../xmm0600950101/products/lightcurves/fullrun_pn_xmm0600950101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0600950101/products/lightcurves/fullrun_pn_xmm0600950101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue May 14 02:35:44 2013] Updating aperture counts using extracted products
[Tue May 14 02:35:44 2013] Total counts from fullrun_pn_xmm0600950101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 99939.00
[Tue May 14 02:35:45 2013] Total counts from fullrun_pn_xmm0600950101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 79282.00
[Tue May 14 02:35:45 2013] Got source and background scale factors 3336959.000000, 214064018.000000
[Tue May 14 02:35:45 2013] User source parameters:
  Position = (310.2, 318.9) = 17 3 56.84 -37 50 38.3
  Extent = 6.0 (5.9-6.0)", rotation angle = 0
  Source aperture counts = 98703.1 +/- 317.1
  Background aperture counts = 1235.9
  Rate = 2 +/- 0.006

[Tue May 14 02:36:00 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 02:36:00 2013] Using photon index=1.80, rate=1.53, arf fullrun_pn_xmm0600950101_pi300-10000_pass1_cl_src1.arf
[Tue May 14 02:36:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 02:36:00 2013] Updating source flux to 7.6e-12
[Tue May 14 02:36:33 2013] xmm0600950101/analysis//spectral/fullrun_pn_xmm0600950101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete