[Mon Aug 20 16:39:05 2012] Detection parameters:
  Position = (218.4, 307.2) = 10 14 4.48 6 14 29.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 19.8 +/- 6.1
  Background counts = 3.5
  Rate = 0.004 +/- 0.001

[Mon Aug 20 16:39:05 2012] Off-axis axis estimate = 5.84'
[Mon Aug 20 17:15:03 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 17:15:03 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Mon Aug 20 17:15:03 2012] source mask rpix=2.1, npix_max = 28, mask sum = 25, frac = 0.891
[Mon Aug 20 17:15:03 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.35"
[Mon Aug 20 17:29:59 2012] fullrun_mos1_xmm0600920301_pi300-10000_cl_pass0_src6.ximg exists
[Mon Aug 20 17:29:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600920301_pi300-10000_cl_pass0_src6.csv
[Mon Aug 20 17:29:59 2012] fullrun_mos1_xmm0600920301_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Aug 20 17:29:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600920301_pi300-10000_cl_pass0_src6.csv
[Mon Aug 20 17:29:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600920301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600920301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 17:29:59 2012] fullrun_mos1_xmm0600920301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Aug 20 17:29:59 2012] fullrun_mos1_xmm0600920301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Aug 20 17:29:59 2012] Fit fullrun_mos1_xmm0600920301_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Mon Aug 20 17:47:38 2012] Spatial fit model total counts = 53.591900, observed total counts = 52.000000
[Mon Aug 20 17:47:38 2012] Offset between fit and detection position for source 6 = 1.195938 pixels
[Mon Aug 20 17:47:38 2012] 54.542200 total counts/ 29.823200 bgd. counts: snr = 4.526409
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.195938 pixels
  Position = (217.4, 306.5) = 10 14 4.76 6 14 23.8
  Extent = 8.6 (5.9-16.2)", rotation angle = 0
  Source counts = 24.7 +/- 7.4
  Background counts = 29.8
  Rate = 0.003 +/- 0.001
[Mon Aug 20 17:47:38 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 17:47:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 17:47:38 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 17:47:38 2012] Source does appear to be extended
[Mon Aug 20 17:47:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 18:23:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 20 18:23:46 2012] Initial guess for spatial extent in simple fitting = 8.63"
[Mon Aug 20 18:23:46 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.013
[Mon Aug 20 18:23:46 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 8.63"
[Mon Aug 20 18:42:18 2012] fullrun_mos1_xmm0600920301_pi300-10000_cl_pass1_src6.ximg exists
[Mon Aug 20 18:42:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600920301_pi300-10000_cl_pass1_src6.csv
[Mon Aug 20 18:42:18 2012] fullrun_mos1_xmm0600920301_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Aug 20 18:42:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600920301_pi300-10000_cl_pass1_src6.csv
[Mon Aug 20 18:42:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600920301_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600920301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 18:42:18 2012] fullrun_mos1_xmm0600920301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Aug 20 18:42:18 2012] fullrun_mos1_xmm0600920301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Aug 20 18:42:18 2012] Fit fullrun_mos1_xmm0600920301_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Mon Aug 20 18:59:55 2012] Warning, spatial fit 6 centroid is now closest to src. 2
[Mon Aug 20 18:59:55 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 18:59:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 18:59:55 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 18:59:55 2012] Source does appear to be extended
[Mon Aug 20 18:59:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 19:19:18 2012] XMMSAS src. selection expression = ellipse(18865.012400, 26619.727400, 517.675215, 517.675215, 0.000000, X, Y)
[Mon Aug 20 19:19:18 2012] Writing source region out to fullrun_mos1_xmm0600920301_pi300-10000_pass1_cl_src6_src.reg
[Mon Aug 20 19:19:18 2012] Extracting stamp from image fullrun_mos1_xmm0600920301_pi300-10000_cl_sm2.00.img.gz, (188, 277) - (247, 336)
[Mon Aug 20 19:19:18 2012] XMMSAS bgd. selection expression = annulus(18865.012400, 26619.727400, 862.792025, 1725.584050, X, Y)
[Mon Aug 20 19:19:18 2012] Writing fullrun_mos1_xmm0600920301_pi300-10000_pass1_cl_src6.gif
[Mon Aug 20 19:21:32 2012] Mean detx,y = (1796.53, -7698.81) 
[Mon Aug 20 19:21:34 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 19:21:58 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 19:21:58 2012] Setting source spectrum file to fullrun_mos1_xmm0600920301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Aug 20 19:21:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600920301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Aug 20 19:23:59 2012] Not generating rmf since there are only 24 counts
[Mon Aug 20 19:23:59 2012] rmf not generated due to insufficient counts
[Mon Aug 20 19:31:50 2012] Updating aperture counts using extracted products
[Mon Aug 20 19:31:50 2012] Error reading totcts from fullrun_mos1_xmm0600920301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Aug 20 19:31:50 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 20 19:31:50 2012] Using photon index=1.80, rate=0.00325, arf fullrun_mos1_xmm0600920301_pi300-10000_pass1_cl_src6.arf
[Mon Aug 20 19:31:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 20 19:31:50 2012] Updating source flux to 5.1e-14
[Mon Aug 20 19:31:52 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Aug 20 19:31:53 2012] xmm0600920301/analysis//spectral/fullrun_mos1_xmm0600920301_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete