[Sat Jul  6 19:15:15 2013] Detection parameters:
  Position = (392.9, 253.0) = 12 3 43.94 58 14 38.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.4 +/- 8.3
  Background counts = 7.2
  Rate = 0.01 +/- 0.003

[Sat Jul  6 19:15:15 2013] Off-axis axis estimate = 7.60'
[Sat Jul  6 19:16:06 2013] Using EEF radius (= 10.23 ")to estimate initial spatial extent for simple fitting
[Sat Jul  6 19:16:06 2013] Initial guess for spatial extent in simple fitting = 10.23"
[Sat Jul  6 19:16:06 2013] source mask rpix=2.4, npix_max = 32, mask sum = 29, frac = 0.892
[Sat Jul  6 19:16:06 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 10.23"
[Sat Jul  6 19:32:13 2013] fullrun_pn_xmm0600920201_pi300-10000_cl_pass0_src14.ximg exists
[Sat Jul  6 19:32:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600920201_pi300-10000_cl_pass0_src14.csv
[Sat Jul  6 19:32:13 2013] fullrun_pn_xmm0600920201_pi300-10000_cl_pass0_src14_1.ximg exists
[Sat Jul  6 19:32:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600920201_pi300-10000_cl_pass0_src14.csv
[Sat Jul  6 19:32:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600920201_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600920201_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  6 19:32:13 2013] fullrun_pn_xmm0600920201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sat Jul  6 19:32:13 2013] fullrun_pn_xmm0600920201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sat Jul  6 19:32:13 2013] Fit fullrun_pn_xmm0600920201_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Sat Jul  6 19:53:31 2013] Spatial fit model total counts = 92.357800, observed total counts = 84.000000
[Sat Jul  6 19:53:31 2013] Offset between fit and detection position for source 14 = 0.381034 pixels
[Sat Jul  6 19:53:31 2013] 94.165700 total counts/ 58.095000 bgd. counts: snr = 4.732441
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.381034 pixels
  Position = (393.3, 253.1) = 12 3 43.74 58 14 40.4
  Extent = 6.7 (4.4-9.9)", rotation angle = 0
  Source counts = 36.1 +/- 9.7
  Background counts = 58.1
  Rate = 0.006 +/- 0.002
[Sat Jul  6 19:53:31 2013] Vigneting correction estimate = 1.000000
[Sat Jul  6 19:53:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  6 19:53:31 2013] Assessing source extent using major axis lower bound
[Sat Jul  6 19:53:31 2013] Source does appear to be extended
[Sat Jul  6 19:53:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  6 19:53:39 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul  6 19:53:39 2013] Initial guess for spatial extent in simple fitting = 6.71"
[Sat Jul  6 19:53:39 2013] source mask rpix=1.5, npix_max = 16, mask sum = 15, frac = 0.899
[Sat Jul  6 19:53:39 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 6.71"
[Sat Jul  6 20:08:47 2013] fullrun_pn_xmm0600920201_pi300-10000_cl_pass1_src13.ximg exists
[Sat Jul  6 20:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600920201_pi300-10000_cl_pass1_src13.csv
[Sat Jul  6 20:08:47 2013] fullrun_pn_xmm0600920201_pi300-10000_cl_pass1_src13_1.ximg exists
[Sat Jul  6 20:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600920201_pi300-10000_cl_pass1_src13.csv
[Sat Jul  6 20:08:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600920201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600920201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  6 20:08:47 2013] fullrun_pn_xmm0600920201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sat Jul  6 20:08:47 2013] fullrun_pn_xmm0600920201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Jul  6 20:08:47 2013] Fit fullrun_pn_xmm0600920201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Jul  6 20:29:52 2013] Spatial fit model total counts = 90.946900, observed total counts = 83.000000
[Sat Jul  6 20:29:52 2013] Offset between fit and detection position for source 14 = 0.066918 pixels
[Sat Jul  6 20:29:52 2013] 92.869800 total counts/ 55.606500 bgd. counts: snr = 4.997106
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.066918 pixels
  Position = (393.3, 253.1) = 12 3 43.73 58 14 40.7
  Extent = 7.0 (4.4-9.8)", rotation angle = 0
  Source counts = 37.3 +/- 9.6
  Background counts = 55.6
  Rate = 0.006 +/- 0.002
[Sat Jul  6 20:29:52 2013] Vigneting correction estimate = 1.000000
[Sat Jul  6 20:29:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  6 20:29:52 2013] Assessing source extent using major axis lower bound
[Sat Jul  6 20:29:52 2013] Source does appear to be extended
[Sat Jul  6 20:29:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  6 20:30:00 2013] XMMSAS src. selection expression = ellipse(34165.323400, 21975.390600, 421.002471, 421.002471, 0.000000, X, Y)
[Sat Jul  6 20:30:00 2013] Writing source region out to fullrun_pn_xmm0600920201_pi300-10000_pass1_cl_src14_src.reg
[Sat Jul  6 20:30:00 2013] Extracting stamp from image fullrun_pn_xmm0600920201_pi300-10000_cl_sm2.00.img.gz, (369, 229) - (417, 277)
[Sat Jul  6 20:30:00 2013] XMMSAS bgd. selection expression = annulus(34165.323400, 21975.390600, 701.670784, 1403.341569, X, Y)
[Sat Jul  6 20:30:00 2013] Writing fullrun_pn_xmm0600920201_pi300-10000_pass1_cl_src14.gif
[Sat Jul  6 20:33:25 2013] Mean detx,y = (5358.38, 7985.32) 
[Sat Jul  6 20:33:27 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jul  6 20:33:34 2013] Binned source spectrum to 10 counts/bin
[Sat Jul  6 20:33:34 2013] Setting source spectrum file to fullrun_pn_xmm0600920201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Jul  6 20:33:34 2013] Setting bgd. spectrum file to fullrun_pn_xmm0600920201_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sat Jul  6 20:44:50 2013] Not generating rmf since there are only 37 counts
[Sat Jul  6 20:44:50 2013] rmf not generated due to insufficient counts
[Sat Jul  6 20:50:19 2013] Updating aperture counts using extracted products
[Sat Jul  6 20:50:19 2013] Total counts from fullrun_pn_xmm0600920201_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 50.00
[Sat Jul  6 20:50:19 2013] Total counts from fullrun_pn_xmm0600920201_pi300-10000_pass1_cl_src14_bgd.pi.gz = 151.00
[Sat Jul  6 20:50:19 2013] Got source and background scale factors 483830.000000, 4265831.000000
[Sat Jul  6 20:50:19 2013] User source parameters:
  Position = (393.3, 253.1) = 12 3 43.73 58 14 40.7
  Extent = 7.0 (4.4-9.8)", rotation angle = 0
  Source aperture counts = 32.9 +/- 8.1
  Background aperture counts = 17.1
  Rate = 0.005 +/- 0.001

[Sat Jul  6 20:50:20 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jul  6 20:50:20 2013] Using photon index=1.80, rate=0.00618, arf fullrun_pn_xmm0600920201_pi300-10000_pass1_cl_src14.arf
[Sat Jul  6 20:50:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul  6 20:50:20 2013] Updating source flux to 2.8e-14
[Sat Jul  6 20:50:25 2013] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jul  6 20:50:26 2013] xmm0600920201/analysis//spectral/fullrun_pn_xmm0600920201_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete