[Sat Jul 6 19:15:38 2013] Detection parameters: Position = (292.3, 241.9) = 12 4 39.38 58 13 52.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 75.1 +/- 10.7 Background counts = 3.0 Rate = 0.01 +/- 0.002 [Sat Jul 6 19:15:38 2013] Off-axis axis estimate = 4.12' [Sat Jul 6 19:43:38 2013] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting [Sat Jul 6 19:43:38 2013] Initial guess for spatial extent in simple fitting = 8.49" [Sat Jul 6 19:43:38 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.040 [Sat Jul 6 19:43:38 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 8.49" [Sat Jul 6 19:53:29 2013] fullrun_mos2_xmm0600920201_pi300-10000_cl_pass0_src2.ximg exists [Sat Jul 6 19:53:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600920201_pi300-10000_cl_pass0_src2.csv [Sat Jul 6 19:53:29 2013] fullrun_mos2_xmm0600920201_pi300-10000_cl_pass0_src2_1.ximg exists [Sat Jul 6 19:53:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600920201_pi300-10000_cl_pass0_src2.csv [Sat Jul 6 19:53:29 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0600920201_pi300-10000_cl_pass0_src2_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0600920201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jul 6 19:53:29 2013] fullrun_mos2_xmm0600920201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Sat Jul 6 19:53:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600920201_pi300-10000_cl_pass0_tfrozen_src2.csv [Sat Jul 6 19:53:29 2013] fullrun_mos2_xmm0600920201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Sat Jul 6 19:53:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600920201_pi300-10000_cl_pass0_tfrozen_src2.csv [Sat Jul 6 19:53:29 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0600920201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0600920201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jul 6 19:53:34 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 12.039700 pixels away [Sat Jul 6 19:53:34 2013] Vigneting correction estimate = 1.000000 [Sat Jul 6 19:53:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jul 6 19:53:34 2013] Assessing source extent using major [Sat Jul 6 19:53:34 2013] Source does appear to be extended [Sat Jul 6 19:53:34 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jul 6 20:19:40 2013] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting [Sat Jul 6 20:19:40 2013] Initial guess for spatial extent in simple fitting = 8.49" [Sat Jul 6 20:19:40 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.040 [Sat Jul 6 20:19:40 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 8.49" [Sat Jul 6 20:29:49 2013] fullrun_mos2_xmm0600920201_pi300-10000_cl_pass1_src2.ximg exists [Sat Jul 6 20:29:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600920201_pi300-10000_cl_pass1_src2.csv [Sat Jul 6 20:29:49 2013] fullrun_mos2_xmm0600920201_pi300-10000_cl_pass1_src2_1.ximg exists [Sat Jul 6 20:29:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600920201_pi300-10000_cl_pass1_src2.csv [Sat Jul 6 20:29:49 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0600920201_pi300-10000_cl_pass1_src2_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0600920201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jul 6 20:29:49 2013] fullrun_mos2_xmm0600920201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Sat Jul 6 20:29:49 2013] fullrun_mos2_xmm0600920201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Sat Jul 6 20:29:49 2013] Fit fullrun_mos2_xmm0600920201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly [Sat Jul 6 20:29:55 2013] Spatial fit model total counts = 111.554000, observed total counts = 101.000000 [Sat Jul 6 20:29:55 2013] Poor agreement between spatial fit and data for source 9 It may help to tweak spatial fit manually Not incorporating fit results [Sat Jul 6 20:29:55 2013] Vigneting correction estimate = 1.000000 [Sat Jul 6 20:29:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jul 6 20:29:55 2013] Assessing source extent using major [Sat Jul 6 20:29:55 2013] Source does appear to be extended [Sat Jul 6 20:29:55 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jul 6 20:47:43 2013] XMMSAS src. selection expression = ellipse(25378.691681, 20994.806870, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jul 6 20:47:43 2013] Writing source region out to fullrun_mos2_xmm0600920201_pi300-10000_pass1_cl_src9_src.reg [Sat Jul 6 20:47:43 2013] Extracting stamp from image fullrun_mos2_xmm0600920201_pi300-10000_cl_sm2.00.img.gz, (255, 204) - (330, 279) [Sat Jul 6 20:47:43 2013] XMMSAS bgd. selection expression = annulus(25378.691681, 20994.806870, 1087.500000, 2175.000000, X, Y) [Sat Jul 6 20:47:43 2013] Writing fullrun_mos2_xmm0600920201_pi300-10000_pass1_cl_src9.gif [Sat Jul 6 20:47:50 2013] Mean detx,y = (3370.24, -6110.51) [Sat Jul 6 20:47:50 2013] Setting backscal keywords in source and bgd. spectrum [Sat Jul 6 20:48:02 2013] Binned source spectrum to 10 counts/bin [Sat Jul 6 20:48:03 2013] Setting source spectrum file to fullrun_mos2_xmm0600920201_pi300-10000_pass1_cl_src9_src_b10.pi.gz [Sat Jul 6 20:48:03 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0600920201_pi300-10000_pass1_cl_src9_bgd.pi.gz [Sat Jul 6 20:49:27 2013] Not generating rmf since there are only 75 counts [Sat Jul 6 20:49:27 2013] rmf not generated due to insufficient counts [Sat Jul 6 20:50:21 2013] Updating aperture counts using extracted products [Sat Jul 6 20:50:21 2013] Total counts from fullrun_mos2_xmm0600920201_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 89.00 [Sat Jul 6 20:50:22 2013] Total counts from fullrun_mos2_xmm0600920201_pi300-10000_pass1_cl_src9_bgd.pi.gz = 152.00 [Sat Jul 6 20:50:22 2013] Got source and background scale factors 1243148.000000, 10425416.000000 [Sat Jul 6 20:50:22 2013] User source parameters: Position = (292.3, 241.9) = 12 4 39.38 58 13 52.9 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 70.9 +/- 10.5 Background aperture counts = 18.1 Rate = 0.009 +/- 0.001 [Sat Jul 6 20:50:22 2013] Updating counts from extracted products [Sat Jul 6 20:50:22 2013] Set source signif. to 70.88/4.26 = 16.65 [Sat Jul 6 20:50:22 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jul 6 20:50:22 2013] Using photon index=1.80, rate=0.0093, arf fullrun_mos2_xmm0600920201_pi300-10000_pass1_cl_src9.arf [Sat Jul 6 20:50:22 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jul 6 20:50:22 2013] Updating source flux to 1.2e-13 [Sat Jul 6 20:50:24 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jul 6 20:50:25 2013] xmm0600920201/analysis//spectral/fullrun_mos2_xmm0600920201_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete