[Sat Jul 6 19:15:27 2013] Detection parameters: Position = (292.4, 241.7) = 12 4 39.28 58 13 52.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 54.8 +/- 9.1 Background counts = 2.7 Rate = 0.01 +/- 0.002 [Sat Jul 6 19:15:27 2013] Off-axis axis estimate = 4.14' [Sat Jul 6 19:32:13 2013] Using EEF radius (= 8.50 ")to estimate initial spatial extent for simple fitting [Sat Jul 6 19:32:13 2013] Initial guess for spatial extent in simple fitting = 8.50" [Sat Jul 6 19:32:13 2013] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.997 [Sat Jul 6 19:32:13 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 8.50" [Sat Jul 6 19:43:38 2013] fullrun_mos1_xmm0600920201_pi300-10000_cl_pass0_src2.ximg exists [Sat Jul 6 19:43:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600920201_pi300-10000_cl_pass0_src2.csv [Sat Jul 6 19:43:38 2013] fullrun_mos1_xmm0600920201_pi300-10000_cl_pass0_src2_1.ximg exists [Sat Jul 6 19:43:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600920201_pi300-10000_cl_pass0_src2.csv [Sat Jul 6 19:43:38 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0600920201_pi300-10000_cl_pass0_src2_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0600920201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jul 6 19:43:38 2013] fullrun_mos1_xmm0600920201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Sat Jul 6 19:43:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600920201_pi300-10000_cl_pass0_tfrozen_src2.csv [Sat Jul 6 19:43:38 2013] fullrun_mos1_xmm0600920201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Sat Jul 6 19:43:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600920201_pi300-10000_cl_pass0_tfrozen_src2.csv [Sat Jul 6 19:43:38 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0600920201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0600920201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jul 6 19:53:33 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 10.520561 pixels away [Sat Jul 6 19:53:33 2013] Vigneting correction estimate = 1.000000 [Sat Jul 6 19:53:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jul 6 19:53:33 2013] Assessing source extent using major [Sat Jul 6 19:53:33 2013] Source does appear to be extended [Sat Jul 6 19:53:33 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jul 6 20:08:47 2013] Using EEF radius (= 8.50 ")to estimate initial spatial extent for simple fitting [Sat Jul 6 20:08:47 2013] Initial guess for spatial extent in simple fitting = 8.50" [Sat Jul 6 20:08:47 2013] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.997 [Sat Jul 6 20:08:47 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 8.50" [Sat Jul 6 20:19:39 2013] fullrun_mos1_xmm0600920201_pi300-10000_cl_pass1_src2.ximg exists [Sat Jul 6 20:19:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600920201_pi300-10000_cl_pass1_src2.csv [Sat Jul 6 20:19:39 2013] fullrun_mos1_xmm0600920201_pi300-10000_cl_pass1_src2_1.ximg exists [Sat Jul 6 20:19:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600920201_pi300-10000_cl_pass1_src2.csv [Sat Jul 6 20:19:39 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0600920201_pi300-10000_cl_pass1_src2_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0600920201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jul 6 20:19:40 2013] fullrun_mos1_xmm0600920201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Sat Jul 6 20:19:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600920201_pi300-10000_cl_pass1_tfrozen_src2.csv [Sat Jul 6 20:19:40 2013] fullrun_mos1_xmm0600920201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Sat Jul 6 20:19:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600920201_pi300-10000_cl_pass1_tfrozen_src2.csv [Sat Jul 6 20:19:40 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0600920201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0600920201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jul 6 20:29:53 2013] Source 11 is offset by -6.800373 and 7.216959 pixels which is larger than 2 X fitted extent = 0.976630 x 0.976630, not incorporating fit results [Sat Jul 6 20:29:53 2013] Vigneting correction estimate = 1.000000 [Sat Jul 6 20:29:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jul 6 20:29:53 2013] Assessing source extent using major [Sat Jul 6 20:29:53 2013] Source does appear to be extended [Sat Jul 6 20:29:53 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jul 6 20:45:22 2013] XMMSAS src. selection expression = ellipse(25394.393524, 20979.471420, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jul 6 20:45:22 2013] Writing source region out to fullrun_mos1_xmm0600920201_pi300-10000_pass1_cl_src11_src.reg [Sat Jul 6 20:45:22 2013] Extracting stamp from image fullrun_mos1_xmm0600920201_pi300-10000_cl_sm2.00.img.gz, (255, 204) - (330, 279) [Sat Jul 6 20:45:22 2013] XMMSAS bgd. selection expression = annulus(25394.393524, 20979.471420, 1087.500000, 2175.000000, X, Y) && !ellipse(25804.199951, 21673.413773, 870.000000, 870.000000, 0.000000, X, Y) [Sat Jul 6 20:45:22 2013] Writing fullrun_mos1_xmm0600920201_pi300-10000_pass1_cl_src11.gif [Sat Jul 6 20:45:29 2013] Mean detx,y = (-5852.55, -3503.75) [Sat Jul 6 20:45:29 2013] Setting backscal keywords in source and bgd. spectrum [Sat Jul 6 20:45:36 2013] Binned source spectrum to 10 counts/bin [Sat Jul 6 20:45:37 2013] Setting source spectrum file to fullrun_mos1_xmm0600920201_pi300-10000_pass1_cl_src11_src_b10.pi.gz [Sat Jul 6 20:45:37 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0600920201_pi300-10000_pass1_cl_src11_bgd.pi.gz [Sat Jul 6 20:47:14 2013] Not generating rmf since there are only 54 counts [Sat Jul 6 20:47:14 2013] rmf not generated due to insufficient counts [Sat Jul 6 20:50:20 2013] Updating aperture counts using extracted products [Sat Jul 6 20:50:20 2013] Total counts from fullrun_mos1_xmm0600920201_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 67.00 [Sat Jul 6 20:50:20 2013] Total counts from fullrun_mos1_xmm0600920201_pi300-10000_pass1_cl_src11_bgd.pi.gz = 86.00 [Sat Jul 6 20:50:20 2013] Got source and background scale factors 1279836.000000, 5999958.000000 [Sat Jul 6 20:50:20 2013] User source parameters: Position = (292.4, 241.7) = 12 4 39.28 58 13 52.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 48.7 +/- 9.2 Background aperture counts = 18.3 Rate = 0.006 +/- 0.001 [Sat Jul 6 20:50:20 2013] Updating counts from extracted products [Sat Jul 6 20:50:20 2013] Set source signif. to 48.66/4.28 = 11.36 [Sat Jul 6 20:50:21 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jul 6 20:50:21 2013] Using photon index=1.80, rate=0.00639, arf fullrun_mos1_xmm0600920201_pi300-10000_pass1_cl_src11.arf [Sat Jul 6 20:50:21 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jul 6 20:50:21 2013] Updating source flux to 9e-14 [Sat Jul 6 20:50:23 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jul 6 20:50:24 2013] xmm0600920201/analysis//spectral/fullrun_mos1_xmm0600920201_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete