[Sat Jul  6 19:15:27 2013] Detection parameters:
  Position = (297.2, 249.7) = 12 4 36.68 58 14 27.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 20.5 +/- 5.8
  Background counts = 2.7
  Rate = 0.004 +/- 0.001

[Sat Jul  6 19:15:27 2013] Off-axis axis estimate = 3.54'
[Sat Jul  6 19:32:13 2013] Using EEF radius (= 8.20 ")to estimate initial spatial extent for simple fitting
[Sat Jul  6 19:32:13 2013] Initial guess for spatial extent in simple fitting = 8.20"
[Sat Jul  6 19:32:13 2013] source mask rpix=1.9, npix_max = 22, mask sum = 22, frac = 0.967
[Sat Jul  6 19:32:13 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 8.20"
[Sat Jul  6 19:43:38 2013] fullrun_mos1_xmm0600920201_pi300-10000_cl_pass0_src10.ximg exists
[Sat Jul  6 19:43:38 2013] fullrun_mos1_xmm0600920201_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Jul  6 19:43:38 2013] Fit fullrun_mos1_xmm0600920201_pi300-10000_cl_pass0_src10 appears to have run properly
[Sat Jul  6 19:43:38 2013] fullrun_mos1_xmm0600920201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Jul  6 19:43:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600920201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Jul  6 19:43:38 2013] fullrun_mos1_xmm0600920201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Jul  6 19:43:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600920201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Jul  6 19:43:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600920201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600920201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  6 19:53:33 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 10.457702 pixels away
[Sat Jul  6 19:53:33 2013] Vigneting correction estimate = 1.000000
[Sat Jul  6 19:53:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  6 19:53:33 2013] Assessing source extent using major
[Sat Jul  6 19:53:33 2013] Source does appear to be extended
[Sat Jul  6 19:53:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  6 20:08:47 2013] Using EEF radius (= 8.20 ")to estimate initial spatial extent for simple fitting
[Sat Jul  6 20:08:47 2013] Initial guess for spatial extent in simple fitting = 8.20"
[Sat Jul  6 20:08:47 2013] source mask rpix=1.9, npix_max = 22, mask sum = 22, frac = 0.967
[Sat Jul  6 20:08:47 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 8.20"
[Sat Jul  6 20:19:40 2013] fullrun_mos1_xmm0600920201_pi300-10000_cl_pass1_src10.ximg exists
[Sat Jul  6 20:19:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600920201_pi300-10000_cl_pass1_src10.csv
[Sat Jul  6 20:19:40 2013] fullrun_mos1_xmm0600920201_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Jul  6 20:19:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600920201_pi300-10000_cl_pass1_src10.csv
[Sat Jul  6 20:19:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600920201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600920201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  6 20:19:40 2013] fullrun_mos1_xmm0600920201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Jul  6 20:19:40 2013] fullrun_mos1_xmm0600920201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Jul  6 20:19:40 2013] Fit fullrun_mos1_xmm0600920201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Jul  6 20:29:53 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 11.465686 pixels away
[Sat Jul  6 20:29:53 2013] Vigneting correction estimate = 1.000000
[Sat Jul  6 20:29:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  6 20:29:53 2013] Assessing source extent using major
[Sat Jul  6 20:29:53 2013] Source does appear to be extended
[Sat Jul  6 20:29:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  6 20:45:22 2013] XMMSAS src. selection expression = ellipse(25804.199951, 21673.413773, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul  6 20:45:22 2013] Writing source region out to fullrun_mos1_xmm0600920201_pi300-10000_pass1_cl_src10_src.reg
[Sat Jul  6 20:45:22 2013] Extracting stamp from image fullrun_mos1_xmm0600920201_pi300-10000_cl_sm2.00.img.gz, (260, 212) - (335, 287)
[Sat Jul  6 20:45:22 2013] XMMSAS bgd. selection expression = annulus(25804.199951, 21673.413773, 1087.500000, 2175.000000, X, Y) && !ellipse(25394.393524, 20979.471420, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul  6 20:45:22 2013] Writing fullrun_mos1_xmm0600920201_pi300-10000_pass1_cl_src10.gif
[Sat Jul  6 20:46:44 2013] Mean detx,y = (-5439.51, -2980.57) 
[Sat Jul  6 20:46:45 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jul  6 20:46:52 2013] Binned source spectrum to 10 counts/bin
[Sat Jul  6 20:46:53 2013] Setting source spectrum file to fullrun_mos1_xmm0600920201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Jul  6 20:46:53 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0600920201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Jul  6 20:47:35 2013] Not generating rmf since there are only 20 counts
[Sat Jul  6 20:47:35 2013] rmf not generated due to insufficient counts
[Sat Jul  6 20:50:21 2013] Updating aperture counts using extracted products
[Sat Jul  6 20:50:21 2013] Total counts from fullrun_mos1_xmm0600920201_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 37.00
[Sat Jul  6 20:50:21 2013] Total counts from fullrun_mos1_xmm0600920201_pi300-10000_pass1_cl_src10_bgd.pi.gz = 120.00
[Sat Jul  6 20:50:21 2013] Got source and background scale factors 1259676.000000, 7618644.000000
[Sat Jul  6 20:50:21 2013] User source parameters:
  Position = (297.2, 249.7) = 12 4 36.68 58 14 27.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 17.2 +/- 7.1
  Background aperture counts = 19.8
  Rate = 0.002 +/- 0.0009

[Sat Jul  6 20:50:21 2013] Updating counts from extracted products
[Sat Jul  6 20:50:21 2013] Set source signif. to 17.16/4.45 = 3.85
[Sat Jul  6 20:50:21 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jul  6 20:50:21 2013] Using photon index=1.80, rate=0.00225, arf fullrun_mos1_xmm0600920201_pi300-10000_pass1_cl_src10.arf
[Sat Jul  6 20:50:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul  6 20:50:21 2013] Updating source flux to 3e-14
[Sat Jul  6 20:50:23 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jul  6 20:50:24 2013] xmm0600920201/analysis//spectral/fullrun_mos1_xmm0600920201_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete