[Wed Jan 4 10:52:39 2012] Detection parameters: Position = (321.2, 371.1) = 18 46 40.07 45 48 34.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 180.2 +/- 29.5 Background counts = 331.9 Rate = 0.007 +/- 0.001 [Wed Jan 4 10:52:41 2012] Off-axis axis estimate = 5.52' [Wed Jan 4 11:00:03 2012] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting [Wed Jan 4 11:00:03 2012] Initial guess for spatial extent in simple fitting = 9.19" [Wed Jan 4 11:00:03 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.099 [Wed Jan 4 11:00:03 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.19" [Wed Jan 4 13:21:53 2012] fullrun_pn_xmm0600830501_pi300-10000_cl_pass0_src3.ximg exists [Wed Jan 4 13:21:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600830501_pi300-10000_cl_pass0_src3.csv [Wed Jan 4 13:21:53 2012] fullrun_pn_xmm0600830501_pi300-10000_cl_pass0_src3_1.ximg exists [Wed Jan 4 13:21:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600830501_pi300-10000_cl_pass0_src3.csv [Wed Jan 4 13:21:53 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0600830501_pi300-10000_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0600830501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jan 4 13:21:54 2012] fullrun_pn_xmm0600830501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists [Wed Jan 4 13:21:54 2012] fullrun_pn_xmm0600830501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists [Wed Jan 4 13:21:54 2012] Fit fullrun_pn_xmm0600830501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly [Wed Jan 4 15:49:48 2012] Warning, spatial fit 3 centroid is now closest to src. 2 [Wed Jan 4 15:49:48 2012] Source 3 is offset by -3.735949 and 5.122389 pixels which is larger than 2 X fitted extent = 0.995255 x 0.995255, not incorporating fit results [Wed Jan 4 15:49:48 2012] Vigneting correction estimate = 1.000000 [Wed Jan 4 15:49:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jan 4 15:49:48 2012] Assessing source extent using major [Wed Jan 4 15:49:48 2012] Source does appear to be extended [Wed Jan 4 15:49:48 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jan 4 15:49:48 2012] Source is confused with source 5 [Wed Jan 4 15:49:48 2012] Source is confused with source 7 [Wed Jan 4 15:49:48 2012] Source is confused with source 8 [Wed Jan 4 15:50:22 2012] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting [Wed Jan 4 15:50:22 2012] Initial guess for spatial extent in simple fitting = 9.19" [Wed Jan 4 15:50:22 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.099 [Wed Jan 4 15:50:22 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.19" [Wed Jan 4 18:22:42 2012] fullrun_pn_xmm0600830501_pi300-10000_cl_pass1_src2.ximg exists [Wed Jan 4 18:22:42 2012] fullrun_pn_xmm0600830501_pi300-10000_cl_pass1_src2_1.ximg exists [Wed Jan 4 18:22:42 2012] Fit fullrun_pn_xmm0600830501_pi300-10000_cl_pass1_src2 appears to have run properly [Wed Jan 4 18:22:42 2012] fullrun_pn_xmm0600830501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Wed Jan 4 18:22:42 2012] fullrun_pn_xmm0600830501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Wed Jan 4 18:22:42 2012] Fit fullrun_pn_xmm0600830501_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly [Wed Jan 4 20:27:55 2012] Source 3 is offset by 1.566003 and -5.007933 pixels which is larger than 2 X fitted extent = 2.402345 x 2.061858, not incorporating fit results [Wed Jan 4 20:27:55 2012] Spatial fit model total counts = 4360.760000, observed total counts = 4360.000000 [Wed Jan 4 20:27:55 2012] Offset between fit and detection position for source 3 = 7.483950 pixels [Wed Jan 4 20:27:55 2012] Warning, changing simple spatial fit ID from 2 to 7 [Wed Jan 4 20:27:55 2012] 3960.520000 total counts/ 2621.710000 bgd. counts: snr = 26.147286 Spatial fit parameters: Offset between fit and detection position for source 3 = 7.483950 pixels Position = (327.1, 375.8) = 18 46 37.64 45 48 55.3 Extent = 36.6 (36.5-73.1)", rotation angle = 0 Source counts = 1338.8 +/- 62.9 Background counts = 2621.7 Rate = 0.05 +/- 0.002 [Wed Jan 4 20:27:55 2012] Vigneting correction estimate = 1.000000 [Wed Jan 4 20:27:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jan 4 20:27:55 2012] Assessing source extent using major axis lower bound [Wed Jan 4 20:27:55 2012] Source does appear to be extended [Wed Jan 4 20:27:55 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jan 4 20:28:27 2012] Counts = 1338.810000, rescaling region sizes by 2.000000 [Wed Jan 4 20:28:27 2012] XMMSAS src. selection expression = ellipse(28405.310100, 32644.186000, 4387.104126, 4387.104126, 0.000000, X, Y) [Wed Jan 4 20:28:27 2012] Writing source region out to fullrun_pn_xmm0600830501_pi300-10000_pass1_cl_src3_src.reg [Wed Jan 4 20:28:27 2012] Extracting stamp from image fullrun_pn_xmm0600830501_pi300-10000_cl_sm2.00.img.gz, (75, 124) - (579, 595) [Wed Jan 4 20:28:27 2012] XMMSAS bgd. selection expression = annulus(28405.310100, 32644.186000, 14623.680421, 29247.360842, X, Y) && !ellipse(34448.773800, 34260.339600, 407.362412, 407.362412, 0.000000, X, Y) && !ellipse(17344.186722, 32156.384094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28615.356000, 31609.656600, 1426.272041, 1426.272041, 0.000000, X, Y) && !ellipse(27118.670441, 31698.521637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27694.140076, 31633.521210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28438.930000, 31460.598000, 1462.368042, 1462.368042, 0.000000, X, Y) && !ellipse(26861.070000, 31152.556000, 713.100021, 713.100021, 0.000000, X, Y) && !ellipse(27541.486511, 31014.872833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26049.836000, 30200.644000, 1344.808039, 1344.808039, 0.000000, X, Y) && !ellipse(27821.909400, 30366.088000, 755.736822, 755.736822, 0.000000, X, Y) && !ellipse(27368.296295, 30572.090942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28063.850160, 29749.422400, 606.696817, 606.696817, 0.000000, X, Y) && !ellipse(17601.510060, 29785.088400, 688.983466, 688.983466, 0.000000, X, Y) && !ellipse(19451.711460, 29643.604400, 370.631211, 370.631211, 0.000000, X, Y) && !ellipse(14070.786400, 27880.432200, 723.756821, 444.265613, 4.362428, X, Y) && !ellipse(16175.801254, 27414.623901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17887.518000, 27143.162800, 1555.000045, 1555.000045, 0.000000, X, Y) && !ellipse(24349.520200, 26969.733200, 323.173609, 323.173609, 0.000000, X, Y) && !ellipse(17569.829697, 27085.182556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12693.214000, 26126.022000, 438.237613, 438.237613, 0.000000, X, Y) && !ellipse(10435.843636, 26067.470001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10182.786600, 25035.736200, 764.970422, 764.970422, 0.000000, X, Y) && !ellipse(24209.655680, 24727.273400, 501.958414, 501.958414, 0.000000, X, Y) && !ellipse(19671.434067, 13506.067078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29838.174200, 24720.205200, 379.836011, 379.836011, 0.000000, X, Y) && !ellipse(16212.164536, 24466.797974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14543.310800, 24423.009200, 426.394412, 426.394412, 0.000000, X, Y) && !ellipse(17262.240400, 23672.004600, 500.806414, 335.152810, 63.523000, X, Y) && !ellipse(38920.353400, 23181.529800, 396.093611, 396.093611, 0.000000, X, Y) && !ellipse(15639.002000, 23125.991800, 389.306411, 389.306411, 0.000000, X, Y) && !ellipse(24703.030400, 22276.596200, 370.768811, 370.768811, 0.000000, X, Y) && !ellipse(14678.211400, 20772.472200, 382.556811, 382.556811, 0.000000, X, Y) && !ellipse(15938.028778, 17850.352127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24745.583600, 8768.516760, 438.061613, 278.382408, 346.194804, X, Y) [Wed Jan 4 20:28:27 2012] Writing fullrun_pn_xmm0600830501_pi300-10000_pass1_cl_src3.gif [Wed Jan 4 20:30:20 2012] Mean detx,y = (-1001.74, 8318.61) [Wed Jan 4 20:30:32 2012] Setting backscal keywords in source and bgd. spectrum [Wed Jan 4 20:45:22 2012] Binned source spectrum to 10 counts/bin [Wed Jan 4 20:45:23 2012] Setting source spectrum file to fullrun_pn_xmm0600830501_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Wed Jan 4 20:45:23 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600830501_pi300-10000_pass1_cl_src3_bgd.pi.gz [Wed Jan 4 23:43:18 2012] Updating aperture counts using extracted products [Wed Jan 4 23:43:18 2012] Error reading totcts from fullrun_pn_xmm0600830501_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Wed Jan 4 23:43:21 2012] Calculating source flux in energy range 0.30-8.00 [Wed Jan 4 23:43:21 2012] Using photon index=1.80, rate=0.0472, arf fullrun_pn_xmm0600830501_pi300-10000_pass1_cl_src3.arf [Wed Jan 4 23:43:21 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jan 4 23:43:21 2012] Updating source flux to 1.5e-13 [Wed Jan 4 23:45:48 2012] Flag b found in src. 3 procflags, skipping spectral fitting [Wed Jan 4 23:45:48 2012] Flag c found in src. 3 procflags, skipping spectral fitting