[Wed Jan  4 10:52:39 2012] Detection parameters:
  Position = (396.7, 394.2) = 18 46 8.65 45 50 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 384.9 +/- 33.3
  Background counts = 236.8
  Rate = 0.008 +/- 0.0007

[Wed Jan  4 10:52:41 2012] Off-axis axis estimate = 9.95'
[Wed Jan  4 11:00:03 2012] Using EEF radius (= 11.40 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 11:00:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan  4 11:00:03 2012] Initial guess for spatial extent in simple fitting = 11.40"
[Wed Jan  4 11:00:03 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.924
[Wed Jan  4 11:00:03 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.40"
[Wed Jan  4 13:21:53 2012] fullrun_pn_xmm0600830501_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jan  4 13:21:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600830501_pi300-10000_cl_pass0_src1.csv
[Wed Jan  4 13:21:53 2012] fullrun_pn_xmm0600830501_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jan  4 13:21:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600830501_pi300-10000_cl_pass0_src1.csv
[Wed Jan  4 13:21:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600830501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600830501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 13:21:54 2012] fullrun_pn_xmm0600830501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jan  4 13:21:54 2012] fullrun_pn_xmm0600830501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jan  4 13:21:54 2012] Fit fullrun_pn_xmm0600830501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jan  4 15:49:48 2012] Spatial fit model total counts = 1403.220000, observed total counts = 1404.000000
[Wed Jan  4 15:49:48 2012] Offset between fit and detection position for source 1 = 0.197659 pixels
[Wed Jan  4 15:49:48 2012] 1399.533000 total counts/ 1261.650000 bgd. counts: snr = 3.881873
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.197659 pixels
  Position = (396.5, 394.3) = 18 46 8.71 45 50 15.5
  Extent = 5.4 (4.3-7.3)", rotation angle = 0
  Source counts = 137.9 +/- 37.4
  Background counts = 1261.7
  Rate = 0.005 +/- 0.001
[Wed Jan  4 15:49:48 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 15:49:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 15:49:48 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 15:49:48 2012] Source does appear to be extended
[Wed Jan  4 15:49:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 15:50:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan  4 15:50:22 2012] Initial guess for spatial extent in simple fitting = 5.41"
[Wed Jan  4 15:50:22 2012] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.739
[Wed Jan  4 15:50:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.41"
[Wed Jan  4 18:22:42 2012] fullrun_pn_xmm0600830501_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jan  4 18:22:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600830501_pi300-10000_cl_pass1_src1.csv
[Wed Jan  4 18:22:42 2012] fullrun_pn_xmm0600830501_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jan  4 18:22:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600830501_pi300-10000_cl_pass1_src1.csv
[Wed Jan  4 18:22:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600830501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600830501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 18:22:42 2012] fullrun_pn_xmm0600830501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jan  4 18:22:42 2012] fullrun_pn_xmm0600830501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jan  4 18:22:42 2012] Fit fullrun_pn_xmm0600830501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jan  4 20:27:55 2012] Spatial fit model total counts = 907.894000, observed total counts = 908.000000
[Wed Jan  4 20:27:55 2012] Offset between fit and detection position for source 1 = 0.047286 pixels
[Wed Jan  4 20:27:55 2012] 900.440000 total counts/ 771.864000 bgd. counts: snr = 4.627959
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.047286 pixels
  Position = (396.5, 394.4) = 18 46 8.72 45 50 15.7
  Extent = 5.1 (4.1-6.8)", rotation angle = 0
  Source counts = 128.6 +/- 30.0
  Background counts = 771.9
  Rate = 0.005 +/- 0.001
[Wed Jan  4 20:27:55 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 20:27:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 20:27:55 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 20:27:55 2012] Source does appear to be extended
[Wed Jan  4 20:27:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 20:28:27 2012] XMMSAS src. selection expression = ellipse(34448.773800, 34260.339600, 305.521809, 305.521809, 0.000000, X, Y)
[Wed Jan  4 20:28:27 2012] Writing source region out to fullrun_pn_xmm0600830501_pi300-10000_pass1_cl_src1_src.reg
[Wed Jan  4 20:28:27 2012] Extracting stamp from image fullrun_pn_xmm0600830501_pi300-10000_cl_sm2.00.img.gz, (379, 377) - (414, 412)
[Wed Jan  4 20:28:27 2012] XMMSAS bgd. selection expression = annulus(34448.773800, 34260.339600, 509.203015, 1018.406029, X, Y)
[Wed Jan  4 20:28:27 2012] Writing fullrun_pn_xmm0600830501_pi300-10000_pass1_cl_src1.gif
[Wed Jan  4 20:29:01 2012] Mean detx,y = (-6214.14, 12236.36) 
[Wed Jan  4 20:29:06 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan  4 20:29:26 2012] Binned source spectrum to 10 counts/bin
[Wed Jan  4 20:29:27 2012] Setting source spectrum file to fullrun_pn_xmm0600830501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jan  4 20:29:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600830501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jan  4 23:43:18 2012] Updating aperture counts using extracted products
[Wed Jan  4 23:43:18 2012] Error reading totcts from fullrun_pn_xmm0600830501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jan  4 23:43:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan  4 23:43:21 2012] Using photon index=1.80, rate=0.00454, arf fullrun_pn_xmm0600830501_pi300-10000_pass1_cl_src1.arf
[Wed Jan  4 23:43:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan  4 23:43:21 2012] Updating source flux to 3.7e-14
[Wed Jan  4 23:52:00 2012] Reading fit data from xmm0600830501/analysis//spectral/fullrun_pn_xmm0600830501_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jan  4 23:52:00 2012] Spectral fit parameter nH value = 2.47054e+21
[Wed Jan  4 23:52:00 2012] Spectral fit parameter PhoIndex value = 2.85726
[Wed Jan  4 23:52:00 2012] Failed to get F(0.3-8.0) from xmm0600830501/analysis//spectral/fullrun_pn_xmm0600830501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jan  4 23:52:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan  4 23:52:00 2012] Using Nh = 2.5e+21, photon index=2.86, rate=0.00454, arf fullrun_pn_xmm0600830501_pi300-10000_pass1_cl_src1.arf
[Wed Jan  4 23:52:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan  4 23:52:00 2012] Updating source flux to 3.3e-14