[Wed Jan  4 10:53:24 2012] Detection parameters:
  Position = (286.1, 101.7) = 18 46 54.66 45 29 2.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 487.2 +/- 28.8
  Background counts = 43.0
  Rate = 0.01 +/- 0.0006

[Wed Jan  4 10:53:24 2012] Off-axis axis estimate = 14.29'
[Wed Jan  4 13:21:55 2012] Using EEF radius (= 13.57 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 13:21:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan  4 13:21:55 2012] Initial guess for spatial extent in simple fitting = 13.57"
[Wed Jan  4 13:21:55 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.068
[Wed Jan  4 13:21:55 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.57"
[Wed Jan  4 14:02:19 2012] fullrun_mos1_xmm0600830501_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jan  4 14:02:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600830501_pi300-10000_cl_pass0_src1.csv
[Wed Jan  4 14:02:19 2012] fullrun_mos1_xmm0600830501_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jan  4 14:02:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600830501_pi300-10000_cl_pass0_src1.csv
[Wed Jan  4 14:02:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600830501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600830501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 14:02:20 2012] fullrun_mos1_xmm0600830501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jan  4 14:02:20 2012] fullrun_mos1_xmm0600830501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jan  4 14:02:20 2012] Fit fullrun_mos1_xmm0600830501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jan  4 15:49:55 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 18.632537 pixels away
[Wed Jan  4 15:49:55 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 15:49:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 15:49:55 2012] Assessing source extent using major
[Wed Jan  4 15:49:55 2012] Source does appear to be extended
[Wed Jan  4 15:49:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 18:22:43 2012] Using EEF radius (= 13.57 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 18:22:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan  4 18:22:43 2012] Initial guess for spatial extent in simple fitting = 13.57"
[Wed Jan  4 18:22:43 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.068
[Wed Jan  4 18:22:43 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.57"
[Wed Jan  4 18:59:41 2012] fullrun_mos1_xmm0600830501_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jan  4 18:59:41 2012] fullrun_mos1_xmm0600830501_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jan  4 18:59:41 2012] Fit fullrun_mos1_xmm0600830501_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Jan  4 18:59:41 2012] fullrun_mos1_xmm0600830501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jan  4 18:59:41 2012] fullrun_mos1_xmm0600830501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jan  4 18:59:41 2012] Fit fullrun_mos1_xmm0600830501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jan  4 20:28:01 2012] Spatial fit model total counts = 914.570000, observed total counts = 919.000000
[Wed Jan  4 20:28:01 2012] Offset between fit and detection position for source 20 = 0.085455 pixels
[Wed Jan  4 20:28:01 2012] 908.223000 total counts/ 520.588000 bgd. counts: snr = 16.989316
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.085455 pixels
  Position = (286.0, 101.6) = 18 46 54.68 45 29 2.8
  Extent = 8.6 (7.6-9.8)", rotation angle = 0
  Source counts = 387.6 +/- 30.1
  Background counts = 520.6
  Rate = 0.009 +/- 0.0007
[Wed Jan  4 20:28:01 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 20:28:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 20:28:01 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 20:28:01 2012] Source does appear to be extended
[Wed Jan  4 20:28:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 22:40:38 2012] XMMSAS src. selection expression = ellipse(24836.024200, 8792.919600, 514.903215, 514.903215, 0.000000, X, Y)
[Wed Jan  4 22:40:38 2012] Writing source region out to fullrun_mos1_xmm0600830501_pi300-10000_pass1_cl_src20_src.reg
[Wed Jan  4 22:40:38 2012] Extracting stamp from image fullrun_mos1_xmm0600830501_pi300-10000_cl_sm2.00.img.gz, (256, 72) - (316, 131)
[Wed Jan  4 22:40:38 2012] XMMSAS bgd. selection expression = annulus(24836.024200, 8792.919600, 858.172025, 1716.344049, X, Y)
[Wed Jan  4 22:40:38 2012] Writing fullrun_mos1_xmm0600830501_pi300-10000_pass1_cl_src20.gif
[Wed Jan  4 22:40:43 2012] Mean detx,y = (15024.45, -6276.57) 
[Wed Jan  4 22:40:46 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan  4 22:41:09 2012] Binned source spectrum to 10 counts/bin
[Wed Jan  4 22:41:10 2012] Setting source spectrum file to fullrun_mos1_xmm0600830501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Jan  4 22:41:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600830501_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Wed Jan  4 23:43:23 2012] Updating aperture counts using extracted products
[Wed Jan  4 23:43:23 2012] Error reading totcts from fullrun_mos1_xmm0600830501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Jan  4 23:43:24 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan  4 23:43:24 2012] Using photon index=1.80, rate=0.00909, arf fullrun_mos1_xmm0600830501_pi300-10000_pass1_cl_src20.arf
[Wed Jan  4 23:43:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan  4 23:43:24 2012] Updating source flux to 2.8e-13
[Wed Jan  4 23:43:44 2012] Reading fit data from xmm0600830501/analysis//spectral/fullrun_mos1_xmm0600830501_pi300-10000_pass1_cl_src20_pl.csv
[Wed Jan  4 23:43:44 2012] Spectral fit parameter nH value = 8.7122e+19
[Wed Jan  4 23:43:44 2012] Spectral fit parameter PhoIndex value = 1.79066
[Wed Jan  4 23:43:44 2012] Failed to get F(0.3-8.0) from xmm0600830501/analysis//spectral/fullrun_mos1_xmm0600830501_pi300-10000_pass1_cl_src20_pl.csv, possibly due to different flux energy range selected
[Wed Jan  4 23:43:44 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan  4 23:43:44 2012] Using Nh = 8.7e+19, photon index=1.79, rate=0.00909, arf fullrun_mos1_xmm0600830501_pi300-10000_pass1_cl_src20.arf
[Wed Jan  4 23:43:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan  4 23:43:44 2012] Updating source flux to 2.8e-13