[Mon Feb 27 16:57:32 2012] Detection parameters:
  Position = (311.0, 321.2) = 21 6 57.31 38 45 29.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1512.7 +/- 47.5
  Background counts = 6.5
  Rate = 0.1 +/- 0.004

[Mon Feb 27 16:57:32 2012] Off-axis axis estimate = 1.89'
[Mon Feb 27 18:03:04 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Mon Feb 27 18:03:04 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Mon Feb 27 18:03:04 2012] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.623
[Mon Feb 27 18:03:04 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.37"
[Mon Feb 27 18:28:02 2012] fullrun_mos2_xmm0600820801_pi300-10000_cl_pass0_src1.ximg exists
[Mon Feb 27 18:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600820801_pi300-10000_cl_pass0_src1.csv
[Mon Feb 27 18:28:02 2012] fullrun_mos2_xmm0600820801_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Feb 27 18:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600820801_pi300-10000_cl_pass0_src1.csv
[Mon Feb 27 18:28:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600820801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600820801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 18:28:02 2012] fullrun_mos2_xmm0600820801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Feb 27 18:28:02 2012] fullrun_mos2_xmm0600820801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Feb 27 18:28:02 2012] Fit fullrun_mos2_xmm0600820801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Feb 27 18:28:13 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.129171 pixels away
[Mon Feb 27 18:28:13 2012] Spatial fit model total counts = 1577.430000, observed total counts = 1590.000000
[Mon Feb 27 18:28:13 2012] Offset between fit and detection position for source 2 = 0.184614 pixels
[Mon Feb 27 18:28:13 2012] Warning, changing simple spatial fit ID from 1 to 2
[Mon Feb 27 18:28:13 2012] 1660.529000 total counts/ 913.684000 bgd. counts: snr = 24.707708
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.184614 pixels
  Position = (311.0, 321.4) = 21 6 57.32 38 45 28.9
  Extent = 4.1 (3.8-4.3)" x 3.3 (3.1-3.5)", rotation angle = 252 (235-265) degrees
  Source counts = 746.8 +/- 40.7
  Background counts = 913.7
  Rate = 0.05 +/- 0.003
[Mon Feb 27 18:28:13 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 18:28:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 18:28:13 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 18:28:13 2012] Source does appear to be extended
[Mon Feb 27 18:28:13 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.07
[Mon Feb 27 18:28:13 2012] Source is confused with source 1
[Mon Feb 27 19:01:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 27 19:01:39 2012] Initial guess for spatial extent in simple fitting = 3.68"
[Mon Feb 27 19:01:39 2012] source mask rpix=0.8, npix_max = 7, mask sum = 3, frac = 0.414
[Mon Feb 27 19:01:39 2012] Skipping simple spatial due to low active detector fraction
[Mon Feb 27 19:08:33 2012] Spatial fit model total counts = 1607.110000, observed total counts = 1614.000000
[Mon Feb 27 19:08:33 2012] Offset between fit and detection position for source 2 = 0.016434 pixels
[Mon Feb 27 19:08:33 2012] Warning, changing simple spatial fit ID from -1 to 1
[Mon Feb 27 19:08:33 2012] 1675.803000 total counts/ 913.379000 bgd. counts: snr = 25.227316
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.016434 pixels
  Position = (311.0, 321.4) = 21 6 57.32 38 45 28.9
  Extent = 4.1 (3.8-4.5)" x 3.4 (3.1-3.6)", rotation angle = 71 (54-84) degrees
  Source counts = 762.4 +/- 40.9
  Background counts = 913.4
  Rate = 0.05 +/- 0.003
[Mon Feb 27 19:08:33 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 19:08:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 19:08:33 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 19:08:33 2012] Source does appear to be extended
[Mon Feb 27 19:08:33 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.05
[Mon Feb 27 19:34:50 2012] XMMSAS src. selection expression = ellipse(27006.396000, 27914.824000, 247.705207, 202.052406, 70.827600, X, Y)
[Mon Feb 27 19:34:50 2012] Writing source region out to fullrun_mos2_xmm0600820801_pi300-10000_pass1_cl_src2_src.reg
[Mon Feb 27 19:34:50 2012] Extracting stamp from image fullrun_mos2_xmm0600820801_pi300-10000_cl_sm2.00.img.gz, (297, 307) - (325, 336)
[Mon Feb 27 19:34:50 2012] XMMSAS bgd. selection expression = annulus(27006.396000, 27914.824000, 412.842012, 825.684024, X, Y) && !ellipse(26712.535919, 27358.403656, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 19:34:50 2012] Writing fullrun_mos2_xmm0600820801_pi300-10000_pass1_cl_src2.gif
[Mon Feb 27 19:34:53 2012] Mean detx,y = (149.83, 399.61) 
[Mon Feb 27 19:34:55 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 19:35:09 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 19:35:09 2012] Setting source spectrum file to fullrun_mos2_xmm0600820801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Feb 27 19:35:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600820801_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Feb 27 19:42:32 2012] Updating aperture counts using extracted products
[Mon Feb 27 19:42:32 2012] Error reading totcts from fullrun_mos2_xmm0600820801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Feb 27 19:42:32 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 19:42:32 2012] Using photon index=1.80, rate=0.0522, arf fullrun_mos2_xmm0600820801_pi300-10000_pass1_cl_src2.arf
[Mon Feb 27 19:42:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 19:42:32 2012] Updating source flux to 1.1e-12
[Mon Feb 27 19:43:01 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Mon Feb 27 19:43:21 2012] Reading fit data from xmm0600820801/analysis//spectral/fullrun_mos2_xmm0600820801_pi300-10000_pass1_cl_src2_pl.csv
[Mon Feb 27 19:43:21 2012] Spectral fit parameter nH value = 4.8988e+21
[Mon Feb 27 19:43:21 2012] Spectral fit parameter PhoIndex value = 7.1883
[Mon Feb 27 19:43:21 2012] Failed to get F(0.3-8.0) from xmm0600820801/analysis//spectral/fullrun_mos2_xmm0600820801_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Feb 27 19:43:21 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 19:43:21 2012] Using Nh = 4.9e+21, photon index=7.19, rate=0.0522, arf fullrun_mos2_xmm0600820801_pi300-10000_pass1_cl_src2.arf
[Mon Feb 27 19:43:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 19:43:21 2012] Updating source flux to 7e-13