[Mon Feb 27 16:57:01 2012] Detection parameters:
  Position = (311.0, 322.1) = 21 6 57.29 38 45 29.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1710.9 +/- 49.6
  Background counts = 6.9
  Rate = 0.1 +/- 0.004

[Mon Feb 27 16:57:01 2012] Off-axis axis estimate = 1.95'
[Mon Feb 27 17:46:24 2012] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Mon Feb 27 17:46:24 2012] Initial guess for spatial extent in simple fitting = 7.40"
[Mon Feb 27 17:46:24 2012] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.619
[Mon Feb 27 17:46:24 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.40"
[Mon Feb 27 18:03:04 2012] fullrun_mos1_xmm0600820801_pi300-10000_cl_pass0_src1.ximg exists
[Mon Feb 27 18:03:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600820801_pi300-10000_cl_pass0_src1.csv
[Mon Feb 27 18:03:04 2012] fullrun_mos1_xmm0600820801_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Feb 27 18:03:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600820801_pi300-10000_cl_pass0_src1.csv
[Mon Feb 27 18:03:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600820801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600820801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 18:03:04 2012] fullrun_mos1_xmm0600820801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Feb 27 18:03:04 2012] fullrun_mos1_xmm0600820801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Feb 27 18:03:04 2012] Fit fullrun_mos1_xmm0600820801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Feb 27 18:28:10 2012] Spatial fit model total counts = 1844.000000, observed total counts = 1844.000000
[Mon Feb 27 18:28:10 2012] Offset between fit and detection position for source 2 = 0.605223 pixels
[Mon Feb 27 18:28:10 2012] 1794.551000 total counts/ 735.921000 bgd. counts: snr = 39.023714
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.605223 pixels
  Position = (310.9, 321.5) = 21 6 57.35 38 45 29.4
  Extent = 4.8 (4.5-5.0)", rotation angle = 0
  Source counts = 1058.6 +/- 42.4
  Background counts = 735.9
  Rate = 0.07 +/- 0.003
[Mon Feb 27 18:28:10 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 18:28:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 18:28:10 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 18:28:10 2012] Source does appear to be extended
[Mon Feb 27 18:28:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 18:28:10 2012] Source is confused with source 1
[Mon Feb 27 18:45:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 27 18:45:13 2012] Initial guess for spatial extent in simple fitting = 4.75"
[Mon Feb 27 18:45:13 2012] source mask rpix=1.1, npix_max = 10, mask sum = 6, frac = 0.591
[Mon Feb 27 18:45:13 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.75"
[Mon Feb 27 19:01:39 2012] fullrun_mos1_xmm0600820801_pi300-10000_cl_pass1_src1.ximg exists
[Mon Feb 27 19:01:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0600820801_pi300-10000_cl_pass1_src1.csv
[Mon Feb 27 19:01:39 2012] fullrun_mos1_xmm0600820801_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Feb 27 19:01:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0600820801_pi300-10000_cl_pass1_src1.csv
[Mon Feb 27 19:01:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600820801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600820801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 19:01:39 2012] fullrun_mos1_xmm0600820801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Feb 27 19:01:39 2012] fullrun_mos1_xmm0600820801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Feb 27 19:01:39 2012] Fit fullrun_mos1_xmm0600820801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Feb 27 19:08:31 2012] Warning, spatial fit 1 centroid is now closest to src. 1
[Mon Feb 27 19:08:31 2012] Spatial fit model total counts = 1728.130000, observed total counts = 1749.000000
[Mon Feb 27 19:08:31 2012] Offset between fit and detection position for source 2 = 0.082318 pixels
[Mon Feb 27 19:08:31 2012] Warning, changing simple spatial fit ID from 1 to 2
[Mon Feb 27 19:08:31 2012] 1795.279000 total counts/ 872.438000 bgd. counts: snr = 31.243494
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.082318 pixels
  Position = (310.8, 321.5) = 21 6 57.37 38 45 29.1
  Extent = 4.3 (4.0-4.4)", rotation angle = 0
  Source counts = 922.8 +/- 42.4
  Background counts = 872.4
  Rate = 0.06 +/- 0.003
[Mon Feb 27 19:08:31 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 19:08:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 19:08:31 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 19:08:31 2012] Source does appear to be extended
[Mon Feb 27 19:08:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 19:28:12 2012] XMMSAS src. selection expression = ellipse(26994.686000, 27919.688000, 256.437607, 256.437607, 0.000000, X, Y)
[Mon Feb 27 19:28:12 2012] Writing source region out to fullrun_mos1_xmm0600820801_pi300-10000_pass1_cl_src2_src.reg
[Mon Feb 27 19:28:12 2012] Extracting stamp from image fullrun_mos1_xmm0600820801_pi300-10000_cl_sm2.00.img.gz, (296, 307) - (326, 336)
[Mon Feb 27 19:28:12 2012] XMMSAS bgd. selection expression = annulus(26994.686000, 27919.688000, 427.396012, 854.792025, X, Y) && !ellipse(26700.394470, 27366.206787, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 19:28:12 2012] Writing fullrun_mos1_xmm0600820801_pi300-10000_pass1_cl_src2.gif
[Mon Feb 27 19:28:15 2012] Mean detx,y = (620.75, -330.29) 
[Mon Feb 27 19:28:17 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 19:28:29 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 19:28:29 2012] Setting source spectrum file to fullrun_mos1_xmm0600820801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Feb 27 19:28:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600820801_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Feb 27 19:42:32 2012] Updating aperture counts using extracted products
[Mon Feb 27 19:42:32 2012] Error reading totcts from fullrun_mos1_xmm0600820801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Feb 27 19:42:32 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 19:42:32 2012] Using photon index=1.80, rate=0.0632, arf fullrun_mos1_xmm0600820801_pi300-10000_pass1_cl_src2.arf
[Mon Feb 27 19:42:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 19:42:32 2012] Updating source flux to 1e-12
[Mon Feb 27 19:42:33 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Mon Feb 27 19:43:01 2012] Reading fit data from xmm0600820801/analysis//spectral/fullrun_mos1_xmm0600820801_pi300-10000_pass1_cl_src2_pl.csv
[Mon Feb 27 19:43:01 2012] Spectral fit parameter nH value = 5.6896e+21
[Mon Feb 27 19:43:01 2012] Spectral fit parameter PhoIndex value = 7.74585
[Mon Feb 27 19:43:01 2012] Failed to get F(0.3-8.0) from xmm0600820801/analysis//spectral/fullrun_mos1_xmm0600820801_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Feb 27 19:43:01 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 19:43:01 2012] Using Nh = 5.7e+21, photon index=7.75, rate=0.0632, arf fullrun_mos1_xmm0600820801_pi300-10000_pass1_cl_src2.arf
[Mon Feb 27 19:43:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 19:43:01 2012] Updating source flux to 6.6e-13