[Mon Feb 27 16:57:00 2012] Detection parameters:
  Position = (307.5, 315.1) = 21 6 58.62 38 45 2.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 455.5 +/- 26.5
  Background counts = 6.9
  Rate = 0.03 +/- 0.002

[Mon Feb 27 16:57:01 2012] Off-axis axis estimate = 1.37'
[Mon Feb 27 17:46:24 2012] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Mon Feb 27 17:46:24 2012] Initial guess for spatial extent in simple fitting = 7.12"
[Mon Feb 27 17:46:24 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.096
[Mon Feb 27 17:46:24 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.12"
[Mon Feb 27 18:03:04 2012] fullrun_mos1_xmm0600820801_pi300-10000_cl_pass0_src2.ximg exists
[Mon Feb 27 18:03:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600820801_pi300-10000_cl_pass0_src2.csv
[Mon Feb 27 18:03:04 2012] fullrun_mos1_xmm0600820801_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Feb 27 18:03:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600820801_pi300-10000_cl_pass0_src2.csv
[Mon Feb 27 18:03:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600820801_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600820801_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 18:03:04 2012] fullrun_mos1_xmm0600820801_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Feb 27 18:03:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600820801_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Feb 27 18:03:04 2012] fullrun_mos1_xmm0600820801_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Feb 27 18:03:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600820801_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Feb 27 18:03:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600820801_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600820801_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 18:28:10 2012] Spatial fit model total counts = 1185.760000, observed total counts = 1749.000000
[Mon Feb 27 18:28:10 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Feb 27 18:28:10 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 18:28:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 18:28:10 2012] Assessing source extent using major
[Mon Feb 27 18:28:10 2012] Source does appear to be extended
[Mon Feb 27 18:28:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 18:28:10 2012] Source is confused with source 2
[Mon Feb 27 18:45:13 2012] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Mon Feb 27 18:45:13 2012] Initial guess for spatial extent in simple fitting = 7.12"
[Mon Feb 27 18:45:13 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.096
[Mon Feb 27 18:45:13 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.12"
[Mon Feb 27 19:01:39 2012] fullrun_mos1_xmm0600820801_pi300-10000_cl_pass1_src2.ximg exists
[Mon Feb 27 19:01:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0600820801_pi300-10000_cl_pass1_src2.csv
[Mon Feb 27 19:01:39 2012] fullrun_mos1_xmm0600820801_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Feb 27 19:01:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0600820801_pi300-10000_cl_pass1_src2.csv
[Mon Feb 27 19:01:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600820801_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600820801_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 19:01:39 2012] fullrun_mos1_xmm0600820801_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Feb 27 19:01:39 2012] fullrun_mos1_xmm0600820801_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Feb 27 19:01:39 2012] Fit fullrun_mos1_xmm0600820801_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Feb 27 19:08:31 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.761930 pixels away
[Mon Feb 27 19:08:31 2012] Warning, spatial fit 2 centroid is now closest to src. 2
[Mon Feb 27 19:08:31 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 19:08:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 19:08:31 2012] Assessing source extent using major
[Mon Feb 27 19:08:31 2012] Source does appear to be extended
[Mon Feb 27 19:08:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 19:28:12 2012] XMMSAS src. selection expression = ellipse(26700.394470, 27366.206787, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 19:28:12 2012] Writing source region out to fullrun_mos1_xmm0600820801_pi300-10000_pass1_cl_src1_src.reg
[Mon Feb 27 19:28:12 2012] Extracting stamp from image fullrun_mos1_xmm0600820801_pi300-10000_cl_sm2.00.img.gz, (270, 278) - (345, 353)
[Mon Feb 27 19:28:12 2012] XMMSAS bgd. selection expression = annulus(26700.394470, 27366.206787, 1087.500000, 2175.000000, X, Y) && !ellipse(26994.686000, 27919.688000, 341.916810, 341.916810, 0.000000, X, Y)
[Mon Feb 27 19:28:12 2012] Writing fullrun_mos1_xmm0600820801_pi300-10000_pass1_cl_src1.gif
[Mon Feb 27 19:28:34 2012] Mean detx,y = (349.24, -478.68) 
[Mon Feb 27 19:28:36 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 19:28:52 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 19:28:52 2012] Setting source spectrum file to fullrun_mos1_xmm0600820801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 27 19:28:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600820801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Feb 27 19:34:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 27 19:34:09 2012] rmf not generated due to insufficient counts
[Mon Feb 27 19:42:32 2012] Updating aperture counts using extracted products
[Mon Feb 27 19:42:32 2012] Error reading totcts from fullrun_mos1_xmm0600820801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 27 19:42:32 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 19:42:32 2012] Using photon index=1.80, rate=0.0329, arf fullrun_mos1_xmm0600820801_pi300-10000_pass1_cl_src1.arf
[Mon Feb 27 19:42:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 19:42:32 2012] Updating source flux to 4e-13
[Mon Feb 27 19:42:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting