[Wed Mar 21 21:17:27 2012] Detection parameters:
  Position = (307.2, 320.7) = 9 27 46.75 -6 4 18.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 344.1 +/- 22.2
  Background counts = 4.8
  Rate = 0.03 +/- 0.002

[Wed Mar 21 21:17:27 2012] Off-axis axis estimate = 1.73'
[Wed Mar 21 22:06:34 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 22:06:34 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Wed Mar 21 22:06:34 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Wed Mar 21 22:06:34 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Wed Mar 21 22:29:18 2012] fullrun_mos2_xmm0600820701_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar 21 22:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600820701_pi300-10000_cl_pass0_src1.csv
[Wed Mar 21 22:29:18 2012] fullrun_mos2_xmm0600820701_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar 21 22:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600820701_pi300-10000_cl_pass0_src1.csv
[Wed Mar 21 22:29:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600820701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600820701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 22:29:18 2012] fullrun_mos2_xmm0600820701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar 21 22:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600820701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Mar 21 22:29:18 2012] fullrun_mos2_xmm0600820701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar 21 22:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600820701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Mar 21 22:29:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600820701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600820701_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 22:29:29 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.950671 pixels away
[Wed Mar 21 22:29:29 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 22:29:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 22:29:29 2012] Assessing source extent using major
[Wed Mar 21 22:29:29 2012] Source does appear to be extended
[Wed Mar 21 22:29:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 23:22:04 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 23:22:04 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Wed Mar 21 23:22:04 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Wed Mar 21 23:22:04 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.30"
[Wed Mar 21 23:42:51 2012] fullrun_mos2_xmm0600820701_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar 21 23:42:51 2012] fullrun_mos2_xmm0600820701_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar 21 23:42:51 2012] Fit fullrun_mos2_xmm0600820701_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Mar 21 23:42:52 2012] fullrun_mos2_xmm0600820701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar 21 23:42:52 2012] fullrun_mos2_xmm0600820701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar 21 23:42:52 2012] Fit fullrun_mos2_xmm0600820701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Mar 21 23:43:04 2012] Spatial fit model total counts = 365.469000, observed total counts = 352.000000
[Wed Mar 21 23:43:04 2012] Offset between fit and detection position for source 1 = 0.315935 pixels
[Wed Mar 21 23:43:04 2012] 364.320000 total counts/ 129.784000 bgd. counts: snr = 20.587278
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.315935 pixels
  Position = (306.9, 320.6) = 9 27 46.83 -6 4 18.7
  Extent = 5.4" x 4.3", rotation angle = 358
  Source counts = 234.5 +/- 19.1
  Background counts = 129.8
  Rate = 0.02 +/- 0.002
[Wed Mar 21 23:43:04 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 23:43:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 23:43:04 2012] Assessing source extent using major
[Wed Mar 21 23:43:04 2012] Source does appear to be extended
[Wed Mar 21 23:43:04 2012] Computing asymmetry using major and minor axis, asym = 1.24
[Thu Mar 22 00:16:02 2012] XMMSAS src. selection expression = ellipse(26652.722892, 27839.773624, 321.471874, 259.739111, 358.201620, X, Y)
[Thu Mar 22 00:16:02 2012] Writing source region out to fullrun_mos2_xmm0600820701_pi300-10000_pass1_cl_src1_src.reg
[Thu Mar 22 00:16:02 2012] Extracting stamp from image fullrun_mos2_xmm0600820701_pi300-10000_cl_sm2.00.img.gz, (288, 302) - (325, 339)
[Thu Mar 22 00:16:02 2012] XMMSAS bgd. selection expression = annulus(26652.722892, 27839.773624, 535.786457, 1071.572913, X, Y)
[Thu Mar 22 00:16:02 2012] Writing fullrun_mos2_xmm0600820701_pi300-10000_pass1_cl_src1.gif
[Thu Mar 22 00:16:04 2012] Mean detx,y = (21.48, 63.49) 
[Thu Mar 22 00:16:06 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 00:16:17 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 00:16:17 2012] Setting source spectrum file to fullrun_mos2_xmm0600820701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 22 00:16:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600820701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Mar 22 00:25:10 2012] Updating aperture counts using extracted products
[Thu Mar 22 00:25:10 2012] Error reading totcts from fullrun_mos2_xmm0600820701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 22 00:25:10 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 00:25:10 2012] Using photon index=1.80, rate=0.0202, arf fullrun_mos2_xmm0600820701_pi300-10000_pass1_cl_src1.arf
[Thu Mar 22 00:25:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 00:25:10 2012] Updating source flux to 3.2e-13
[Thu Mar 22 00:26:21 2012] Reading fit data from xmm0600820701/analysis//spectral/fullrun_mos2_xmm0600820701_pi300-10000_pass1_cl_src1_pl.csv
[Thu Mar 22 00:26:21 2012] Spectral fit parameter nH value = 4.11622e+21
[Thu Mar 22 00:26:21 2012] Spectral fit parameter PhoIndex value = 6.0744
[Thu Mar 22 00:26:21 2012] Failed to get F(0.3-8.0) from xmm0600820701/analysis//spectral/fullrun_mos2_xmm0600820701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Mar 22 00:26:21 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 00:26:21 2012] Using Nh = 4.1e+21, photon index=6.07, rate=0.0202, arf fullrun_mos2_xmm0600820701_pi300-10000_pass1_cl_src1.arf
[Thu Mar 22 00:26:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 00:26:21 2012] Updating source flux to 2.1e-13