[Sun Feb 26 11:06:46 2012] Detection parameters:
  Position = (423.1, 368.4) = 9 27 9.76 -5 57 32.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.0 +/- 9.2
  Background counts = 4.5
  Rate = 0.004 +/- 0.0007

[Sun Feb 26 11:06:47 2012] Off-axis axis estimate = 10.36'
[Sun Feb 26 12:41:00 2012] Using EEF radius (= 11.61 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 12:41:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 26 12:41:00 2012] Initial guess for spatial extent in simple fitting = 11.61"
[Sun Feb 26 12:41:00 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.046
[Sun Feb 26 12:41:00 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.61"
[Sun Feb 26 13:12:05 2012] fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_src5.ximg exists
[Sun Feb 26 13:12:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_src5.csv
[Sun Feb 26 13:12:05 2012] fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Feb 26 13:12:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_src5.csv
[Sun Feb 26 13:12:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 13:12:05 2012] fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Feb 26 13:12:05 2012] fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Feb 26 13:12:05 2012] Fit fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Feb 26 13:12:21 2012] Spatial fit model total counts = 96.998700, observed total counts = 97.000000
[Sun Feb 26 13:12:21 2012] Offset between fit and detection position for source 6 = 0.595109 pixels
[Sun Feb 26 13:12:21 2012] 96.062100 total counts/ 62.237300 bgd. counts: snr = 4.287557
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.595109 pixels
  Position = (422.5, 368.6) = 9 27 9.92 -5 57 31.8
  Extent = 5.6 (3.9-7.3)", rotation angle = 0
  Source counts = 33.8 +/- 9.8
  Background counts = 62.2
  Rate = 0.003 +/- 0.0007
[Sun Feb 26 13:12:21 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 13:12:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 13:12:21 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 13:12:21 2012] Source does appear to be extended
[Sun Feb 26 13:12:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 14:42:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 14:42:27 2012] Initial guess for spatial extent in simple fitting = 5.59"
[Sun Feb 26 14:42:27 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.706
[Sun Feb 26 14:42:27 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 5.59"
[Sun Feb 26 15:07:52 2012] fullrun_mos2_xmm0600820601_pi300-10000_cl_pass1_src5.ximg exists
[Sun Feb 26 15:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600820601_pi300-10000_cl_pass1_src5.csv
[Sun Feb 26 15:07:52 2012] fullrun_mos2_xmm0600820601_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Feb 26 15:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600820601_pi300-10000_cl_pass1_src5.csv
[Sun Feb 26 15:07:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600820601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600820601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 15:07:52 2012] fullrun_mos2_xmm0600820601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Feb 26 15:07:52 2012] fullrun_mos2_xmm0600820601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Feb 26 15:07:52 2012] Fit fullrun_mos2_xmm0600820601_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Feb 26 15:08:09 2012] Spatial fit model total counts = 94.993900, observed total counts = 95.000000
[Sun Feb 26 15:08:09 2012] Offset between fit and detection position for source 6 = 0.029515 pixels
[Sun Feb 26 15:08:09 2012] 94.055800 total counts/ 59.946400 bgd. counts: snr = 4.405473
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.029515 pixels
  Position = (422.5, 368.6) = 9 27 9.91 -5 57 31.9
  Extent = 5.6 (4.0-7.4)", rotation angle = 0
  Source counts = 34.1 +/- 9.7
  Background counts = 59.9
  Rate = 0.003 +/- 0.0007
[Sun Feb 26 15:08:09 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 15:08:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 15:08:09 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 15:08:09 2012] Source does appear to be extended
[Sun Feb 26 15:08:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 16:04:56 2012] XMMSAS src. selection expression = ellipse(36712.533000, 32018.930000, 333.388368, 333.388368, 0.000000, X, Y)
[Sun Feb 26 16:04:56 2012] Writing source region out to fullrun_mos2_xmm0600820601_pi300-10000_pass1_cl_src6_src.reg
[Sun Feb 26 16:04:56 2012] Extracting stamp from image fullrun_mos2_xmm0600820601_pi300-10000_cl_sm2.00.img.gz, (403, 349) - (442, 388)
[Sun Feb 26 16:04:56 2012] XMMSAS bgd. selection expression = annulus(36712.533000, 32018.930000, 555.647280, 1111.294560, X, Y)
[Sun Feb 26 16:04:56 2012] Writing fullrun_mos2_xmm0600820601_pi300-10000_pass1_cl_src6.gif
[Sun Feb 26 16:06:42 2012] Mean detx,y = (13558.42, -2317.98) 
[Sun Feb 26 16:06:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 16:06:58 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 16:06:59 2012] Setting source spectrum file to fullrun_mos2_xmm0600820601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Feb 26 16:06:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600820601_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Feb 26 16:10:07 2012] Warning, no src. light curve found
[Sun Feb 26 16:16:16 2012] Not generating rmf since there are only 34 counts
[Sun Feb 26 16:16:16 2012] rmf not generated due to insufficient counts
[Sun Feb 26 16:17:58 2012] Updating aperture counts using extracted products
[Sun Feb 26 16:17:58 2012] Error reading totcts from fullrun_mos2_xmm0600820601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Feb 26 16:17:59 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 16:17:59 2012] Using photon index=1.80, rate=0.0026, arf fullrun_mos2_xmm0600820601_pi300-10000_pass1_cl_src6.arf
[Sun Feb 26 16:17:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 16:17:59 2012] Updating source flux to 9.8e-14
[Sun Feb 26 16:18:21 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting