[Sun Feb 26 11:06:46 2012] Detection parameters:
  Position = (445.7, 235.8) = 9 27 3.13 -6 7 10.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.6 +/- 7.8
  Background counts = 4.6
  Rate = 0.003 +/- 0.0006

[Sun Feb 26 11:06:47 2012] Off-axis axis estimate = 11.60'
[Sun Feb 26 12:41:00 2012] Using EEF radius (= 12.23 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 12:41:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 26 12:41:00 2012] Initial guess for spatial extent in simple fitting = 12.23"
[Sun Feb 26 12:41:00 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.957
[Sun Feb 26 12:41:00 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 12.23"
[Sun Feb 26 13:12:05 2012] fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_src11.ximg exists
[Sun Feb 26 13:12:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_src11.csv
[Sun Feb 26 13:12:05 2012] fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Feb 26 13:12:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_src11.csv
[Sun Feb 26 13:12:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 13:12:06 2012] fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Feb 26 13:12:06 2012] fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Feb 26 13:12:06 2012] Fit fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Feb 26 13:12:21 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.270200 pixels away
[Sun Feb 26 13:12:21 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 13:12:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 13:12:21 2012] Assessing source extent using major
[Sun Feb 26 13:12:21 2012] Source does appear to be extended
[Sun Feb 26 13:12:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 14:42:27 2012] Using EEF radius (= 12.23 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 14:42:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 26 14:42:27 2012] Initial guess for spatial extent in simple fitting = 12.23"
[Sun Feb 26 14:42:27 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.957
[Sun Feb 26 14:42:27 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 12.23"
[Sun Feb 26 15:07:52 2012] fullrun_mos2_xmm0600820601_pi300-10000_cl_pass1_src10.ximg exists
[Sun Feb 26 15:07:52 2012] fullrun_mos2_xmm0600820601_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun Feb 26 15:07:52 2012] Fit fullrun_mos2_xmm0600820601_pi300-10000_cl_pass1_src10 appears to have run properly
[Sun Feb 26 15:07:52 2012] fullrun_mos2_xmm0600820601_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun Feb 26 15:07:52 2012] fullrun_mos2_xmm0600820601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Feb 26 15:07:52 2012] Fit fullrun_mos2_xmm0600820601_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sun Feb 26 15:08:09 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.270200 pixels away
[Sun Feb 26 15:08:09 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 15:08:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 15:08:09 2012] Assessing source extent using major
[Sun Feb 26 15:08:09 2012] Source does appear to be extended
[Sun Feb 26 15:08:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 16:04:56 2012] XMMSAS src. selection expression = ellipse(38731.699554, 20470.262024, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Feb 26 16:04:56 2012] Writing source region out to fullrun_mos2_xmm0600820601_pi300-10000_pass1_cl_src4_src.reg
[Sun Feb 26 16:04:56 2012] Extracting stamp from image fullrun_mos2_xmm0600820601_pi300-10000_cl_sm2.00.img.gz, (408, 198) - (483, 273)
[Sun Feb 26 16:04:56 2012] XMMSAS bgd. selection expression = annulus(38731.699554, 20470.262024, 1087.500000, 2175.000000, X, Y)
[Sun Feb 26 16:04:56 2012] Writing fullrun_mos2_xmm0600820601_pi300-10000_pass1_cl_src4.gif
[Sun Feb 26 16:08:44 2012] Mean detx,y = (10275.42, 8935.67) 
[Sun Feb 26 16:08:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 16:09:04 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 16:09:04 2012] Setting source spectrum file to fullrun_mos2_xmm0600820601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Feb 26 16:09:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600820601_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Feb 26 16:17:02 2012] Not generating rmf since there are only 34 counts
[Sun Feb 26 16:17:02 2012] rmf not generated due to insufficient counts
[Sun Feb 26 16:17:59 2012] Updating aperture counts using extracted products
[Sun Feb 26 16:17:59 2012] Error reading totcts from fullrun_mos2_xmm0600820601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Feb 26 16:17:59 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 16:17:59 2012] Using photon index=1.80, rate=0.00264, arf fullrun_mos2_xmm0600820601_pi300-10000_pass1_cl_src4.arf
[Sun Feb 26 16:17:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 16:17:59 2012] Updating source flux to 8.6e-14
[Sun Feb 26 16:18:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting