[Sun Feb 26 11:06:47 2012] Detection parameters:
  Position = (216.9, 193.1) = 9 28 9.88 -6 10 14.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.4 +/- 9.1
  Background counts = 5.0
  Rate = 0.007 +/- 0.001

[Sun Feb 26 11:06:47 2012] Off-axis axis estimate = 9.66'
[Sun Feb 26 12:41:00 2012] Using EEF radius (= 11.26 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 12:41:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 26 12:41:00 2012] Initial guess for spatial extent in simple fitting = 11.26"
[Sun Feb 26 12:41:00 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.944
[Sun Feb 26 12:41:00 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.26"
[Sun Feb 26 13:12:05 2012] fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_src3.ximg exists
[Sun Feb 26 13:12:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_src3.csv
[Sun Feb 26 13:12:05 2012] fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Feb 26 13:12:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_src3.csv
[Sun Feb 26 13:12:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 13:12:05 2012] fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Feb 26 13:12:05 2012] fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Feb 26 13:12:05 2012] Fit fullrun_mos2_xmm0600820601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Feb 26 13:12:21 2012] Spatial fit model total counts = 104.000000, observed total counts = 104.000000
[Sun Feb 26 13:12:21 2012] Offset between fit and detection position for source 12 = 0.274767 pixels
[Sun Feb 26 13:12:21 2012] 105.567200 total counts/ 72.602200 bgd. counts: snr = 3.868817
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.274767 pixels
  Position = (217.2, 193.2) = 9 28 9.81 -6 10 15.0
  Extent = 4.9 (3.7-6.8)", rotation angle = 0
  Source counts = 33.0 +/- 10.3
  Background counts = 72.6
  Rate = 0.003 +/- 0.0008
[Sun Feb 26 13:12:21 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 13:12:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 13:12:21 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 13:12:21 2012] Source does appear to be extended
[Sun Feb 26 13:12:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 14:42:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 14:42:27 2012] Initial guess for spatial extent in simple fitting = 4.95"
[Sun Feb 26 14:42:27 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.840
[Sun Feb 26 14:42:27 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.95"
[Sun Feb 26 15:07:52 2012] fullrun_mos2_xmm0600820601_pi300-10000_cl_pass1_src3.ximg exists
[Sun Feb 26 15:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600820601_pi300-10000_cl_pass1_src3.csv
[Sun Feb 26 15:07:52 2012] fullrun_mos2_xmm0600820601_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Feb 26 15:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600820601_pi300-10000_cl_pass1_src3.csv
[Sun Feb 26 15:07:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600820601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600820601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 15:07:52 2012] fullrun_mos2_xmm0600820601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Feb 26 15:07:52 2012] fullrun_mos2_xmm0600820601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Feb 26 15:07:52 2012] Fit fullrun_mos2_xmm0600820601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Feb 26 15:08:09 2012] Spatial fit model total counts = 104.000000, observed total counts = 104.000000
[Sun Feb 26 15:08:09 2012] Offset between fit and detection position for source 12 = 0.000422 pixels
[Sun Feb 26 15:08:09 2012] 105.566300 total counts/ 72.580900 bgd. counts: snr = 3.871779
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.000422 pixels
  Position = (217.2, 193.2) = 9 28 9.81 -6 10 15.0
  Extent = 5.0 (3.7-6.9)", rotation angle = 0
  Source counts = 33.0 +/- 10.3
  Background counts = 72.6
  Rate = 0.003 +/- 0.0008
[Sun Feb 26 15:08:09 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 15:08:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 15:08:09 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 15:08:09 2012] Source does appear to be extended
[Sun Feb 26 15:08:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 16:04:56 2012] XMMSAS src. selection expression = ellipse(18845.075040, 16756.595000, 297.207009, 297.207009, 0.000000, X, Y)
[Sun Feb 26 16:04:56 2012] Writing source region out to fullrun_mos2_xmm0600820601_pi300-10000_pass1_cl_src12_src.reg
[Sun Feb 26 16:04:56 2012] Extracting stamp from image fullrun_mos2_xmm0600820601_pi300-10000_cl_sm2.00.img.gz, (200, 176) - (234, 210)
[Sun Feb 26 16:04:56 2012] XMMSAS bgd. selection expression = annulus(18845.075040, 16756.595000, 495.345014, 990.690029, X, Y)
[Sun Feb 26 16:04:56 2012] Writing fullrun_mos2_xmm0600820601_pi300-10000_pass1_cl_src12.gif
[Sun Feb 26 16:05:45 2012] Mean detx,y = (-9209.76, 3444.17) 
[Sun Feb 26 16:05:47 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 16:06:02 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 16:06:02 2012] Setting source spectrum file to fullrun_mos2_xmm0600820601_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Feb 26 16:06:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600820601_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sun Feb 26 16:15:59 2012] Not generating rmf since there are only 32 counts
[Sun Feb 26 16:15:59 2012] rmf not generated due to insufficient counts
[Sun Feb 26 16:17:58 2012] Updating aperture counts using extracted products
[Sun Feb 26 16:17:58 2012] Error reading totcts from fullrun_mos2_xmm0600820601_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Feb 26 16:17:59 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 16:17:59 2012] Using photon index=1.80, rate=0.00252, arf fullrun_mos2_xmm0600820601_pi300-10000_pass1_cl_src12.arf
[Sun Feb 26 16:17:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 16:17:59 2012] Updating source flux to 6.9e-14
[Sun Feb 26 16:18:21 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting