[Fri Mar 30 14:57:20 2012] Detection parameters:
  Position = (128.7, 283.0) = 9 28 34.33 -6 3 43.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.6 +/- 11.3
  Background counts = 12.3
  Rate = 0.008 +/- 0.001

[Fri Mar 30 14:57:20 2012] Off-axis axis estimate = 12.36'
[Fri Mar 30 15:00:10 2012] Using EEF radius (= 12.61 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 15:00:10 2012] Initial guess for spatial extent in simple fitting = 12.61"
[Fri Mar 30 15:00:10 2012] source mask rpix=2.9, npix_max = 46, mask sum = 34, frac = 0.736
[Fri Mar 30 15:00:10 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 12.61"
[Fri Mar 30 15:48:23 2012] fullrun_pn_xmm0600820501_pi300-10000_cl_pass0_src11.ximg exists
[Fri Mar 30 15:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600820501_pi300-10000_cl_pass0_src11.csv
[Fri Mar 30 15:48:23 2012] fullrun_pn_xmm0600820501_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Mar 30 15:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600820501_pi300-10000_cl_pass0_src11.csv
[Fri Mar 30 15:48:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600820501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600820501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 15:48:24 2012] fullrun_pn_xmm0600820501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Mar 30 15:48:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600820501_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Mar 30 15:48:24 2012] fullrun_pn_xmm0600820501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Mar 30 15:48:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600820501_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Mar 30 15:48:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600820501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600820501_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 16:48:05 2012] Spatial fit model total counts = 210.400000, observed total counts = 173.000000
[Fri Mar 30 16:48:05 2012] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 30 16:48:05 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 16:48:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 16:48:05 2012] Assessing source extent using major
[Fri Mar 30 16:48:05 2012] Source does appear to be extended
[Fri Mar 30 16:48:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 16:48:24 2012] Using EEF radius (= 12.61 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 16:48:24 2012] Initial guess for spatial extent in simple fitting = 12.61"
[Fri Mar 30 16:48:24 2012] source mask rpix=2.9, npix_max = 46, mask sum = 34, frac = 0.736
[Fri Mar 30 16:48:24 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 12.61"
[Fri Mar 30 17:38:52 2012] fullrun_pn_xmm0600820501_pi300-10000_cl_pass1_src11.ximg exists
[Fri Mar 30 17:38:52 2012] fullrun_pn_xmm0600820501_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Mar 30 17:38:52 2012] Fit fullrun_pn_xmm0600820501_pi300-10000_cl_pass1_src11 appears to have run properly
[Fri Mar 30 17:38:53 2012] fullrun_pn_xmm0600820501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Mar 30 17:38:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600820501_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri Mar 30 17:38:53 2012] fullrun_pn_xmm0600820501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Mar 30 17:38:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600820501_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri Mar 30 17:38:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600820501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600820501_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 18:35:01 2012] Source 11 is offset by 0.796322 and -9.910483 pixels which is larger than
2 X fitted extent = 1.306497 x 1.306497, not incorporating fit results
[Fri Mar 30 18:35:01 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 18:35:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 18:35:01 2012] Assessing source extent using major
[Fri Mar 30 18:35:01 2012] Source does appear to be extended
[Fri Mar 30 18:35:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 18:35:20 2012] XMMSAS src. selection expression = ellipse(11145.588058, 24568.243988, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 30 18:35:20 2012] Writing source region out to fullrun_pn_xmm0600820501_pi300-10000_pass1_cl_src11_src.reg
[Fri Mar 30 18:35:20 2012] Extracting stamp from image fullrun_pn_xmm0600820501_pi300-10000_cl_sm2.00.img.gz, (91, 245) - (166, 320)
[Fri Mar 30 18:35:20 2012] XMMSAS bgd. selection expression = annulus(11145.588058, 24568.243988, 1087.500000, 2175.000000, X, Y) && !ellipse(13672.469711, 25503.013428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12412.894000, 22145.122000, 585.792817, 585.792817, 0.000000, X, Y)
[Fri Mar 30 18:35:20 2012] Writing fullrun_pn_xmm0600820501_pi300-10000_pass1_cl_src11.gif
[Fri Mar 30 18:44:20 2012] Mean detx,y = (13459.09, 3946.73) 
[Fri Mar 30 18:44:25 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 18:44:47 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 18:44:48 2012] Setting source spectrum file to fullrun_pn_xmm0600820501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Mar 30 18:44:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600820501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri Mar 30 19:01:08 2012] Not generating rmf since there are only 76 counts
[Fri Mar 30 19:01:08 2012] rmf not generated due to insufficient counts
[Fri Mar 30 19:26:29 2012] Updating aperture counts using extracted products
[Fri Mar 30 19:26:29 2012] Error reading totcts from fullrun_pn_xmm0600820501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Mar 30 19:26:30 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 30 19:26:30 2012] Using photon index=1.80, rate=0.00764, arf fullrun_pn_xmm0600820501_pi300-10000_pass1_cl_src11.arf
[Fri Mar 30 19:26:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 30 19:26:30 2012] Updating source flux to 6.7e-14
[Fri Mar 30 19:27:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting