[Fri Mar 30 14:58:28 2012] Detection parameters:
  Position = (249.6, 463.6) = 9 27 59.06 -5 50 37.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.4 +/- 7.2
  Background counts = 4.5
  Rate = 0.003 +/- 0.0006

[Fri Mar 30 14:58:28 2012] Off-axis axis estimate = 12.49'
[Fri Mar 30 16:19:41 2012] Using EEF radius (= 12.67 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 16:19:41 2012] Initial guess for spatial extent in simple fitting = 12.67"
[Fri Mar 30 16:19:41 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.051
[Fri Mar 30 16:19:41 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 12.67"
[Fri Mar 30 16:47:57 2012] fullrun_mos2_xmm0600820501_pi300-10000_cl_pass0_src9.ximg exists
[Fri Mar 30 16:47:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600820501_pi300-10000_cl_pass0_src9.csv
[Fri Mar 30 16:47:57 2012] fullrun_mos2_xmm0600820501_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Mar 30 16:47:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600820501_pi300-10000_cl_pass0_src9.csv
[Fri Mar 30 16:47:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600820501_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600820501_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 16:47:58 2012] fullrun_mos2_xmm0600820501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Mar 30 16:47:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600820501_pi300-10000_cl_pass0_tfrozen_src9.csv
[Fri Mar 30 16:47:58 2012] fullrun_mos2_xmm0600820501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Mar 30 16:47:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600820501_pi300-10000_cl_pass0_tfrozen_src9.csv
[Fri Mar 30 16:47:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600820501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600820501_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 16:48:13 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 16.581274 pixels away
[Fri Mar 30 16:48:13 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 16:48:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 16:48:13 2012] Assessing source extent using major
[Fri Mar 30 16:48:13 2012] Source does appear to be extended
[Fri Mar 30 16:48:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 18:08:59 2012] Using EEF radius (= 12.67 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 18:08:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 30 18:08:59 2012] Initial guess for spatial extent in simple fitting = 12.67"
[Fri Mar 30 18:08:59 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.051
[Fri Mar 30 18:08:59 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 12.67"
[Fri Mar 30 18:34:54 2012] fullrun_mos2_xmm0600820501_pi300-10000_cl_pass1_src9.ximg exists
[Fri Mar 30 18:34:54 2012] fullrun_mos2_xmm0600820501_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Mar 30 18:34:54 2012] Fit fullrun_mos2_xmm0600820501_pi300-10000_cl_pass1_src9 appears to have run properly
[Fri Mar 30 18:34:54 2012] fullrun_mos2_xmm0600820501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Mar 30 18:34:54 2012] fullrun_mos2_xmm0600820501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Mar 30 18:34:54 2012] Fit fullrun_mos2_xmm0600820501_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Mar 30 18:35:09 2012] Spatial fit model total counts = 89.495600, observed total counts = 82.000000
[Fri Mar 30 18:35:09 2012] Offset between fit and detection position for source 11 = 0.325808 pixels
[Fri Mar 30 18:35:09 2012] 89.434000 total counts/ 69.967000 bgd. counts: snr = 2.327300
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.325808 pixels
  Position = (249.3, 463.7) = 9 27 59.16 -5 50 38.8
  Extent = 4.6 (3.2-6.4)", rotation angle = 0
  Source counts = 19.5 +/- 9.5
  Background counts = 70.0
  Rate = 0.002 +/- 0.0008
[Fri Mar 30 18:35:09 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 18:35:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 18:35:09 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 18:35:09 2012] Source does appear to be extended
[Fri Mar 30 18:35:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 19:14:07 2012] XMMSAS src. selection expression = ellipse(21636.534600, 40293.572000, 273.579008, 273.579008, 0.000000, X, Y)
[Fri Mar 30 19:14:07 2012] Writing source region out to fullrun_mos2_xmm0600820501_pi300-10000_pass1_cl_src11_src.reg
[Fri Mar 30 19:14:07 2012] Extracting stamp from image fullrun_mos2_xmm0600820501_pi300-10000_cl_sm2.00.img.gz, (234, 448) - (265, 479)
[Fri Mar 30 19:14:07 2012] XMMSAS bgd. selection expression = annulus(21636.534600, 40293.572000, 455.965013, 911.930026, X, Y)
[Fri Mar 30 19:14:07 2012] Writing fullrun_mos2_xmm0600820501_pi300-10000_pass1_cl_src11.gif
[Fri Mar 30 19:17:17 2012] Mean detx,y = (600.22, -16619.89) 
[Fri Mar 30 19:17:20 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 19:17:47 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 19:17:47 2012] Setting source spectrum file to fullrun_mos2_xmm0600820501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Mar 30 19:17:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600820501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri Mar 30 19:25:50 2012] Not generating rmf since there are only 19 counts
[Fri Mar 30 19:25:50 2012] rmf not generated due to insufficient counts
[Fri Mar 30 19:26:33 2012] Updating aperture counts using extracted products
[Fri Mar 30 19:26:33 2012] Error reading totcts from fullrun_mos2_xmm0600820501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Mar 30 19:26:33 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 30 19:26:33 2012] Using photon index=1.80, rate=0.00168, arf fullrun_mos2_xmm0600820501_pi300-10000_pass1_cl_src11.arf
[Fri Mar 30 19:26:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 30 19:26:33 2012] Updating source flux to 7.7e-14
[Fri Mar 30 19:26:55 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting