[Fri Dec 23 11:04:35 2011] Detection parameters:
  Position = (299.2, 272.0) = 15 50 39.36 -3 53 33.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.3 +/- 17.7
  Background counts = 38.9
  Rate = 0.003 +/- 0.0004

[Fri Dec 23 11:04:36 2011] Off-axis axis estimate = 1.92'
[Fri Dec 23 12:48:04 2011] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 12:48:04 2011] Initial guess for spatial extent in simple fitting = 7.39"
[Fri Dec 23 12:48:04 2011] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.724
[Fri Dec 23 12:48:04 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 7.39"
[Fri Dec 23 14:00:41 2011] fullrun_mos2_xmm0600690201_pi300-10000_cl_pass0_src7.ximg exists
[Fri Dec 23 14:00:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690201_pi300-10000_cl_pass0_src7.csv
[Fri Dec 23 14:00:41 2011] fullrun_mos2_xmm0600690201_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Dec 23 14:00:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690201_pi300-10000_cl_pass0_src7.csv
[Fri Dec 23 14:00:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600690201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600690201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 14:00:41 2011] fullrun_mos2_xmm0600690201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Dec 23 14:00:41 2011] fullrun_mos2_xmm0600690201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Dec 23 14:00:41 2011] Fit fullrun_mos2_xmm0600690201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Dec 23 14:00:59 2011] Warning, spatial fit 7 centroid is now closest to src. 4
[Fri Dec 23 14:00:59 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 14:00:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 14:00:59 2011] Assessing source extent using major
[Fri Dec 23 14:00:59 2011] Source does appear to be extended
[Fri Dec 23 14:00:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 15:09:11 2011] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 15:09:11 2011] Initial guess for spatial extent in simple fitting = 7.39"
[Fri Dec 23 15:09:11 2011] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.724
[Fri Dec 23 15:09:11 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 7.39"
[Fri Dec 23 16:01:29 2011] fullrun_mos2_xmm0600690201_pi300-10000_cl_pass1_src7.ximg exists
[Fri Dec 23 16:01:29 2011] fullrun_mos2_xmm0600690201_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Dec 23 16:01:29 2011] Fit fullrun_mos2_xmm0600690201_pi300-10000_cl_pass1_src7 appears to have run properly
[Fri Dec 23 16:01:30 2011] fullrun_mos2_xmm0600690201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Dec 23 16:01:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690201_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Dec 23 16:01:30 2011] fullrun_mos2_xmm0600690201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Dec 23 16:01:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690201_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Dec 23 16:01:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600690201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600690201_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 16:01:47 2011] Spatial fit model total counts = 1132.010000, observed total counts = 1255.000000
[Fri Dec 23 16:01:47 2011] Offset between fit and detection position for source 13 = 9.292873 pixels
[Fri Dec 23 16:01:47 2011] 1054.906000 total counts/ 663.557000 bgd. counts: snr = 15.192355
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 9.292873 pixels
  Position = (306.5, 266.3) = 15 50 37.22 -3 53 57.9
  Extent = 17.1" x 17.0", rotation angle = 0
  Source counts = 391.3 +/- 32.5
  Background counts = 663.6
  Rate = 0.008 +/- 0.0006
[Fri Dec 23 16:01:47 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 16:01:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 16:01:47 2011] Assessing source extent using major
[Fri Dec 23 16:01:47 2011] Source does appear to be extended
[Fri Dec 23 16:01:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 17:42:03 2011] XMMSAS src. selection expression = ellipse(26618.539561, 23123.562481, 1023.930029, 1019.328690, 0.000000, X, Y)
[Fri Dec 23 17:42:03 2011] Writing source region out to fullrun_mos2_xmm0600690201_pi300-10000_pass1_cl_src13_src.reg
[Fri Dec 23 17:42:03 2011] Extracting stamp from image fullrun_mos2_xmm0600690201_pi300-10000_cl_sm2.00.img.gz, (248, 207) - (365, 325)
[Fri Dec 23 17:42:03 2011] XMMSAS bgd. selection expression = annulus(26618.539561, 23123.562481, 1706.550049, 3413.100098, X, Y) && !ellipse(25305.797880, 23936.234928, 442.247426, 382.349174, 7.901295, X, Y) && !ellipse(27903.887390, 22477.323456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23399.906311, 21536.667816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30300.688706, 19211.917110, 781.286422, 134.411717, 337.662552, X, Y) && !ellipse(24619.219600, 22493.089000, 675.836019, 675.836019, 0.000000, X, Y) && !ellipse(23028.818600, 23512.254880, 248.331207, 248.331207, 0.000000, X, Y) && !ellipse(23245.982600, 26104.170200, 471.167214, 471.167214, 0.000000, X, Y)
[Fri Dec 23 17:42:03 2011] Writing fullrun_mos2_xmm0600690201_pi300-10000_pass1_cl_src13.gif
[Fri Dec 23 17:46:21 2011] Mean detx,y = (971.96, 1169.13) 
[Fri Dec 23 17:46:24 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 17:46:44 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 17:46:44 2011] Setting source spectrum file to fullrun_mos2_xmm0600690201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Dec 23 17:46:44 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0600690201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri Dec 23 18:15:31 2011] Updating aperture counts using extracted products
[Fri Dec 23 18:15:31 2011] Error reading totcts from fullrun_mos2_xmm0600690201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Dec 23 18:15:32 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 18:15:32 2011] Using photon index=1.80, rate=0.00773, arf fullrun_mos2_xmm0600690201_pi300-10000_pass1_cl_src13.arf
[Fri Dec 23 18:15:32 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 18:15:32 2011] Updating source flux to 8.2e-14