[Sat Jul 14 03:57:37 2012] Detection parameters:
  Position = (277.9, 286.9) = 20 23 25.25 11 31 35.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4629.7 +/- 85.2
  Background counts = 230.7
  Rate = 0.07 +/- 0.001

[Sat Jul 14 03:57:39 2012] Off-axis axis estimate = 1.71'
[Sat Jul 14 04:02:45 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 04:02:45 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Jul 14 04:02:45 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Sat Jul 14 04:02:45 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.28"
[Sat Jul 14 09:41:42 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src9.ximg exists
[Sat Jul 14 09:41:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src9.csv
[Sat Jul 14 09:41:42 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Jul 14 09:41:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src9.csv
[Sat Jul 14 09:41:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 09:41:44 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Jul 14 09:41:44 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Jul 14 09:41:44 2012] Fit fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sat Jul 14 12:32:36 2012] Spatial fit model total counts = 5386.690000, observed total counts = 5294.000000
[Sat Jul 14 12:32:36 2012] Offset between fit and detection position for source 9 = 0.072959 pixels
[Sat Jul 14 12:32:36 2012] 5407.050000 total counts/ 2298.230000 bgd. counts: snr = 64.848335
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.072959 pixels
  Position = (278.0, 286.9) = 20 23 25.23 11 31 36.0
  Extent = 6.5 (6.3-6.8)", rotation angle = 0
  Source counts = 3108.8 +/- 73.5
  Background counts = 2298.2
  Rate = 0.05 +/- 0.001
[Sat Jul 14 12:32:37 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 12:32:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 12:32:37 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 12:32:37 2012] Source does appear to be extended
[Sat Jul 14 12:32:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 12:33:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 14 12:33:24 2012] Initial guess for spatial extent in simple fitting = 6.51"
[Sat Jul 14 12:33:24 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.004
[Sat Jul 14 12:33:24 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 6.51"
[Sat Jul 14 19:32:36 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_src9.ximg exists
[Sat Jul 14 19:32:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_src9.csv
[Sat Jul 14 19:32:36 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat Jul 14 19:32:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_src9.csv
[Sat Jul 14 19:32:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 19:32:38 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat Jul 14 19:32:38 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Jul 14 19:32:38 2012] Fit fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sat Jul 14 21:36:01 2012] Spatial fit model total counts = 5359.160000, observed total counts = 5325.000000
[Sat Jul 14 21:36:01 2012] Offset between fit and detection position for source 9 = 0.025162 pixels
[Sat Jul 14 21:36:01 2012] 5351.280000 total counts/ 2194.040000 bgd. counts: snr = 67.403947
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.025162 pixels
  Position = (278.0, 286.9) = 20 23 25.23 11 31 36.1
  Extent = 6.6 (6.4-6.9)", rotation angle = 0
  Source counts = 3157.2 +/- 73.2
  Background counts = 2194.0
  Rate = 0.05 +/- 0.001
[Sat Jul 14 21:36:02 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 21:36:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 21:36:02 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 21:36:02 2012] Source does appear to be extended
[Sat Jul 14 21:36:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 21:36:33 2012] Counts = 3157.240000, rescaling region sizes by 2.000000
[Sat Jul 14 21:36:33 2012] XMMSAS src. selection expression = ellipse(24140.251840, 24911.194600, 793.714823, 793.714823, 0.000000, X, Y)
[Sat Jul 14 21:36:33 2012] Writing source region out to fullrun_pn_xmm0600690101_pi300-10000_pass1_cl_src9_src.reg
[Sat Jul 14 21:36:33 2012] Extracting stamp from image fullrun_pn_xmm0600690101_pi300-10000_cl_sm2.00.img.gz, (232, 241) - (324, 333)
[Sat Jul 14 21:36:33 2012] XMMSAS bgd. selection expression = annulus(24140.251840, 24911.194600, 2645.716076, 5291.432152, X, Y) && !ellipse(24609.096400, 30174.082600, 412.540812, 412.540812, 0.000000, X, Y) && !ellipse(19092.648962, 28545.072200, 412.091212, 412.091212, 0.000000, X, Y) && !ellipse(19840.206314, 22149.087494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18712.725555, 27686.578552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19947.841202, 24487.244354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26892.098206, 23178.224640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20747.809140, 20614.572800, 423.311212, 423.311212, 0.000000, X, Y) && !ellipse(19957.665080, 19718.114600, 402.046412, 402.046412, 0.000000, X, Y) && !ellipse(27952.041656, 19374.292480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22149.909225, 30755.059631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25770.626480, 26403.884000, 489.263214, 267.102408, 359.087990, X, Y) && !ellipse(25144.441101, 23809.789734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25767.857910, 23721.247162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24815.031616, 23228.720642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24209.456604, 23358.801147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25070.384369, 22665.339355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29086.323273, 22570.504364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28557.106903, 22487.662140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24679.471130, 22469.857513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30212.095520, 22060.195786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29870.090576, 21492.484146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24071.166748, 21419.311539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23944.342000, 20738.416000, 884.272025, 884.272025, 0.000000, X, Y) && !ellipse(22129.851420, 20446.967000, 376.488011, 376.488011, 0.000000, X, Y) && !ellipse(23747.550537, 20233.976364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23134.068848, 18984.057602, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 21:36:33 2012] Writing fullrun_pn_xmm0600690101_pi300-10000_pass1_cl_src9.gif
[Sat Jul 14 21:44:02 2012] Mean detx,y = (105.11, -210.63) 
[Sat Jul 14 21:44:09 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 21:45:18 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 21:45:19 2012] Setting source spectrum file to fullrun_pn_xmm0600690101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Jul 14 21:45:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600690101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sun Jul 15 01:40:30 2012] Updating aperture counts using extracted products
[Sun Jul 15 01:40:30 2012] Error reading totcts from fullrun_pn_xmm0600690101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun Jul 15 01:40:32 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 01:40:32 2012] Using photon index=1.80, rate=0.048, arf fullrun_pn_xmm0600690101_pi300-10000_pass1_cl_src9.arf
[Sun Jul 15 01:40:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 01:40:32 2012] Updating source flux to 1.2e-13