[Sat Jul 14 03:57:38 2012] Detection parameters:
  Position = (365.6, 239.2) = 20 22 59.31 11 28 9.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.0 +/- 20.8
  Background counts = 118.5
  Rate = 0.003 +/- 0.0006

[Sat Jul 14 03:57:39 2012] Off-axis axis estimate = 6.49'
[Sat Jul 14 04:02:45 2012] Using EEF radius (= 9.67 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 04:02:45 2012] Initial guess for spatial extent in simple fitting = 9.67"
[Sat Jul 14 04:02:45 2012] source mask rpix=2.2, npix_max = 29, mask sum = 29, frac = 0.977
[Sat Jul 14 04:02:45 2012] Giving source the simple spatial ID 86 for pass 0, mean size = 9.67"
[Sat Jul 14 09:41:44 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src86.ximg exists
[Sat Jul 14 09:41:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src86.csv
[Sat Jul 14 09:41:44 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src86_1.ximg exists
[Sat Jul 14 09:41:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src86.csv
[Sat Jul 14 09:41:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src86_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 09:41:46 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src86.ximg exists
[Sat Jul 14 09:41:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src86.csv
[Sat Jul 14 09:41:46 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src86_1.ximg exists
[Sat Jul 14 09:41:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src86.csv
[Sat Jul 14 09:41:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src86_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 12:32:37 2012] Spatial fit model total counts = 1152.090000, observed total counts = 1149.000000
[Sat Jul 14 12:32:37 2012] Offset between fit and detection position for source 89 = 0.552246 pixels
[Sat Jul 14 12:32:37 2012] Warning, changing simple spatial fit ID from 86 to 83
[Sat Jul 14 12:32:37 2012] 1133.809500 total counts/ 1119.430000 bgd. counts: snr = 0.429779
Spatial fit parameters:
  Offset between fit and detection position for source 89 = 0.552246 pixels
  Position = (365.7, 239.8) = 20 22 59.29 11 28 11.0
  Extent = 2.4" x 2.4", rotation angle = 0
  Source counts = 14.4 +/- 33.7
  Background counts = 1119.4
  Rate = 0.0002 +/- 0.0005
  Deleting source due to low Poisson probability