[Sat Jul 14 03:57:37 2012] Detection parameters:
  Position = (211.6, 120.0) = 20 23 44.87 11 19 31.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.8 +/- 21.2
  Background counts = 99.6
  Rate = 0.002 +/- 0.0003

[Sat Jul 14 03:57:39 2012] Off-axis axis estimate = 14.39'
[Sat Jul 14 04:02:45 2012] Using EEF radius (= 13.62 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 04:02:45 2012] Initial guess for spatial extent in simple fitting = 13.62"
[Sat Jul 14 04:02:45 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.061
[Sat Jul 14 04:02:45 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 13.62"
[Sat Jul 14 09:41:43 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src44.ximg exists
[Sat Jul 14 09:41:43 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src44_1.ximg exists
[Sat Jul 14 09:41:43 2012] Fit fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src44 appears to have run properly
[Sat Jul 14 09:41:45 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Sat Jul 14 09:41:45 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Sat Jul 14 09:41:45 2012] Fit fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Sat Jul 14 12:32:36 2012] Source 46 is offset by 4.764971 and -4.225184 pixels which is larger than
2 X fitted extent = 1.584630 x 1.584630, not incorporating fit results
[Sat Jul 14 12:32:36 2012] Warning, spatial fit 44 centroid is now closest to src. 54
[Sat Jul 14 12:32:37 2012] Spatial fit model total counts = 1222.400000, observed total counts = 1153.000000
[Sat Jul 14 12:32:37 2012] Offset between fit and detection position for source 46 = 3.855116 pixels
[Sat Jul 14 12:32:37 2012] Warning, changing simple spatial fit ID from 44 to 53
[Sat Jul 14 12:32:37 2012] 1215.491000 total counts/ 873.790000 bgd. counts: snr = 11.559598
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 3.855116 pixels
  Position = (214.9, 121.9) = 20 23 43.89 11 19 38.3
  Extent = 26.4 (26.3-52.7)", rotation angle = 0
  Source counts = 341.7 +/- 34.9
  Background counts = 873.8
  Rate = 0.005 +/- 0.0005
[Sat Jul 14 12:32:37 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 12:32:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 12:32:37 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 12:32:37 2012] Source does appear to be extended
[Sat Jul 14 12:32:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 12:32:37 2012] Source is confused with source 25
[Sat Jul 14 12:33:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 14 12:33:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 14 12:33:24 2012] Initial guess for spatial extent in simple fitting = 26.36"
[Sat Jul 14 12:33:24 2012] source mask rpix=6.1, npix_max = 172, mask sum = 169, frac = 0.982
[Sat Jul 14 12:33:24 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 26.36"
[Sat Jul 14 19:32:37 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_src42.ximg exists
[Sat Jul 14 19:32:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_src42.csv
[Sat Jul 14 19:32:37 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_src42_1.ximg exists
[Sat Jul 14 19:32:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_src42.csv
[Sat Jul 14 19:32:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 19:32:39 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Sat Jul 14 19:32:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src42.csv
[Sat Jul 14 19:32:39 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Sat Jul 14 19:32:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src42.csv
[Sat Jul 14 19:32:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 21:36:02 2012] Warning, spatial fit 42 centroid is now closest to src. 59
[Sat Jul 14 21:36:02 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 21:36:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 21:36:02 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 21:36:02 2012] Source does appear to be extended
[Sat Jul 14 21:36:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 21:36:34 2012] XMMSAS src. selection expression = ellipse(18649.590000, 10555.908000, 1581.492046, 1581.492046, 0.000000, X, Y)
[Sat Jul 14 21:36:34 2012] Writing source region out to fullrun_pn_xmm0600690101_pi300-10000_pass1_cl_src46_src.reg
[Sat Jul 14 21:36:34 2012] Extracting stamp from image fullrun_pn_xmm0600690101_pi300-10000_cl_sm2.00.img.gz, (124, 31) - (306, 213)
[Sat Jul 14 21:36:34 2012] XMMSAS bgd. selection expression = annulus(18649.590000, 10555.908000, 2635.820076, 5271.640152, X, Y) && !ellipse(15261.638824, 14183.322571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18132.439697, 10042.965012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17143.629791, 10252.432220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22264.323730, 16312.759613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12912.657410, 16263.722549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15053.438065, 15455.754654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21643.620361, 15358.665543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19340.917435, 12031.315125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19241.149399, 11152.862839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18885.095367, 11000.866394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17343.695541, 11087.343353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15863.841949, 10876.468315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18383.143494, 9707.981956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21107.602000, 16516.266000, 1631.072047, 1631.072047, 0.000000, X, Y) && !ellipse(19671.471237, 16309.297455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21646.045731, 15875.165649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21164.942474, 15785.004837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20442.558121, 15630.472839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19864.993668, 14547.369568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20945.868042, 14304.958755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20341.344421, 14135.214767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20808.435760, 13613.161667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20448.433701, 12831.077652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19492.377563, 12396.320587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18982.427414, 12518.280685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19416.575150, 10662.651505, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 21:36:34 2012] Writing fullrun_pn_xmm0600690101_pi300-10000_pass1_cl_src46.gif
[Sat Jul 14 22:19:55 2012] Mean detx,y = (-946.26, -15355.71) 
[Sat Jul 14 22:20:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 22:21:13 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 22:21:13 2012] Setting source spectrum file to fullrun_pn_xmm0600690101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Sat Jul 14 22:21:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600690101_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Sun Jul 15 01:40:31 2012] Updating aperture counts using extracted products
[Sun Jul 15 01:40:31 2012] Error reading totcts from fullrun_pn_xmm0600690101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Sun Jul 15 01:40:33 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 01:40:33 2012] Using photon index=1.80, rate=0.0052, arf fullrun_pn_xmm0600690101_pi300-10000_pass1_cl_src46.arf
[Sun Jul 15 01:40:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 01:40:33 2012] Updating source flux to 3.6e-14
[Sun Jul 15 01:41:50 2012] Flag b found in src. 46 procflags, skipping spectral fitting
[Sun Jul 15 01:41:50 2012] Flag c found in src. 46 procflags, skipping spectral fitting