[Sat Jul 14 03:57:37 2012] Detection parameters:
  Position = (176.0, 163.6) = 20 23 55.41 11 22 36.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1075.3 +/- 42.7
  Background counts = 178.0
  Rate = 0.01 +/- 0.0006

[Sat Jul 14 03:57:39 2012] Off-axis axis estimate = 13.21'
[Sat Jul 14 04:02:45 2012] Using EEF radius (= 13.03 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 04:02:45 2012] Initial guess for spatial extent in simple fitting = 13.03"
[Sat Jul 14 04:02:45 2012] source mask rpix=3.0, npix_max = 48, mask sum = 33, frac = 0.675
[Sat Jul 14 04:02:45 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 13.03"
[Sat Jul 14 09:41:42 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src14.ximg exists
[Sat Jul 14 09:41:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src14.csv
[Sat Jul 14 09:41:42 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src14_1.ximg exists
[Sat Jul 14 09:41:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src14.csv
[Sat Jul 14 09:41:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 09:41:44 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sat Jul 14 09:41:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sat Jul 14 09:41:44 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sat Jul 14 09:41:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sat Jul 14 09:41:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 12:32:36 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 17.372808 pixels away
[Sat Jul 14 12:32:37 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 12:32:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 12:32:37 2012] Assessing source extent using major
[Sat Jul 14 12:32:37 2012] Source does appear to be extended
[Sat Jul 14 12:32:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 12:33:24 2012] Using EEF radius (= 13.03 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 12:33:24 2012] Initial guess for spatial extent in simple fitting = 13.03"
[Sat Jul 14 12:33:24 2012] source mask rpix=3.0, npix_max = 48, mask sum = 33, frac = 0.675
[Sat Jul 14 12:33:24 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 13.03"
[Sat Jul 14 19:32:36 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_src14.ximg exists
[Sat Jul 14 19:32:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_src14.csv
[Sat Jul 14 19:32:36 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_src14_1.ximg exists
[Sat Jul 14 19:32:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_src14.csv
[Sat Jul 14 19:32:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 19:32:38 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sat Jul 14 19:32:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sat Jul 14 19:32:38 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sat Jul 14 19:32:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sat Jul 14 19:32:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 21:36:01 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 15.965805 pixels away
[Sat Jul 14 21:36:02 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 21:36:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 21:36:02 2012] Assessing source extent using major
[Sat Jul 14 21:36:02 2012] Source does appear to be extended
[Sat Jul 14 21:36:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 21:36:33 2012] Counts = 1075.255981, rescaling region sizes by 2.000000
[Sat Jul 14 21:36:33 2012] XMMSAS src. selection expression = ellipse(15261.638824, 14183.322571, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jul 14 21:36:33 2012] Writing source region out to fullrun_pn_xmm0600690101_pi300-10000_pass1_cl_src15_src.reg
[Sat Jul 14 21:36:33 2012] Extracting stamp from image fullrun_pn_xmm0600690101_pi300-10000_cl_sm2.00.img.gz, (101, 89) - (251, 239)
[Sat Jul 14 21:36:33 2012] XMMSAS bgd. selection expression = annulus(15261.638824, 14183.322571, 4350.000000, 8700.000000, X, Y) && !ellipse(19840.206314, 22149.087494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9645.077011, 21199.221558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22952.719727, 17385.010452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11078.623573, 13942.589737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18132.439697, 10042.965012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17143.629791, 10252.432220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20747.809140, 20614.572800, 423.311212, 423.311212, 0.000000, X, Y) && !ellipse(19957.665080, 19718.114600, 402.046412, 402.046412, 0.000000, X, Y) && !ellipse(18649.590000, 10555.908000, 2108.656061, 2108.656061, 0.000000, X, Y) && !ellipse(22264.323730, 16312.759613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12912.657410, 16263.722549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15053.438065, 15455.754654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21643.620361, 15358.665543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19340.917435, 12031.315125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19241.149399, 11152.862839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18885.095367, 11000.866394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17343.695541, 11087.343353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15863.841949, 10876.468315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18383.143494, 9707.981956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8557.642723, 23730.853058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24815.031616, 23228.720642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24209.456604, 23358.801147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24679.471130, 22469.857513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24071.166748, 21419.311539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23944.342000, 20738.416000, 884.272025, 884.272025, 0.000000, X, Y) && !ellipse(15947.712997, 20538.293167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22129.851420, 20446.967000, 376.488011, 376.488011, 0.000000, X, Y) && !ellipse(23747.550537, 20233.976364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23134.068848, 18984.057602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22908.946259, 18477.967865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22230.801331, 18287.708466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22761.605408, 17947.447876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21727.850000, 17515.052000, 1645.600047, 1645.600047, 0.000000, X, Y) && !ellipse(22484.489380, 16849.335724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21107.602000, 16516.266000, 1631.072047, 1631.072047, 0.000000, X, Y) && !ellipse(19671.471237, 16309.297455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21646.045731, 15875.165649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21164.942474, 15785.004837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20442.558121, 15630.472839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19864.993668, 14547.369568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20945.868042, 14304.958755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20341.344421, 14135.214767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20808.435760, 13613.161667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20448.433701, 12831.077652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19492.377563, 12396.320587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18982.427414, 12518.280685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19416.575150, 10662.651505, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 21:36:33 2012] Writing fullrun_pn_xmm0600690101_pi300-10000_pass1_cl_src15.gif
[Sat Jul 14 21:50:41 2012] Mean detx,y = (3447.32, -13716.26) 
[Sat Jul 14 21:50:47 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 21:53:05 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 21:53:05 2012] Setting source spectrum file to fullrun_pn_xmm0600690101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat Jul 14 21:53:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600690101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sat Jul 14 23:44:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 14 23:44:05 2012] rmf not generated due to insufficient counts
[Sun Jul 15 01:40:31 2012] Updating aperture counts using extracted products
[Sun Jul 15 01:40:31 2012] Error reading totcts from fullrun_pn_xmm0600690101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Jul 15 01:40:32 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 01:40:32 2012] Using photon index=1.80, rate=0.0145, arf fullrun_pn_xmm0600690101_pi300-10000_pass1_cl_src15.arf
[Sun Jul 15 01:40:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 01:40:32 2012] Updating source flux to 3.8e-13
[Sun Jul 15 01:41:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting