[Sat Jul 14 03:57:38 2012] Detection parameters:
  Position = (263.9, 212.9) = 20 23 29.41 11 26 18.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.7 +/- 18.9
  Background counts = 115.5
  Rate = 0.002 +/- 0.0004

[Sat Jul 14 03:57:39 2012] Off-axis axis estimate = 6.69'
[Sat Jul 14 04:02:45 2012] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 04:02:45 2012] Initial guess for spatial extent in simple fitting = 9.77"
[Sat Jul 14 04:02:45 2012] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.193
[Sat Jul 14 04:02:45 2012] Giving source the simple spatial ID 100 for pass 0, mean size = 9.77"
[Sat Jul 14 09:41:44 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src100.ximg exists
[Sat Jul 14 09:41:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src100.csv
[Sat Jul 14 09:41:44 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src100_1.ximg exists
[Sat Jul 14 09:41:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src100.csv
[Sat Jul 14 09:41:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src100_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 09:41:46 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src100.ximg exists
[Sat Jul 14 09:41:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src100.csv
[Sat Jul 14 09:41:46 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src100_1.ximg exists
[Sat Jul 14 09:41:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src100.csv
[Sat Jul 14 09:41:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src100_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 12:32:37 2012] Warning, spatial fit 100 centroid is now closest to src. 101
[Sat Jul 14 12:32:37 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 12:32:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 12:32:37 2012] Assessing source extent using major
[Sat Jul 14 12:32:37 2012] Source does appear to be extended
[Sat Jul 14 12:32:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 12:32:37 2012] Source is confused with source 101
[Sat Jul 14 12:33:24 2012] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 12:33:24 2012] Initial guess for spatial extent in simple fitting = 9.77"
[Sat Jul 14 12:33:24 2012] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.193
[Sat Jul 14 12:33:24 2012] Giving source the simple spatial ID 92 for pass 1, mean size = 9.77"
[Sat Jul 14 19:32:38 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_src92.ximg exists
[Sat Jul 14 19:32:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_src92.csv
[Sat Jul 14 19:32:38 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_src92_1.ximg exists
[Sat Jul 14 19:32:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_src92.csv
[Sat Jul 14 19:32:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_src92_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 19:32:40 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src92.ximg exists
[Sat Jul 14 19:32:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src92.csv
[Sat Jul 14 19:32:40 2012] fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src92_1.ximg exists
[Sat Jul 14 19:32:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src92.csv
[Sat Jul 14 19:32:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src92_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 21:36:02 2012] Warning, spatial fit 92 centroid is now closest to src. 106
[Sat Jul 14 21:36:02 2012] Source 103 is offset by 0.193546 and -1.986921 pixels which is larger than
2 X fitted extent = 1.149333 x 1.149333, not incorporating fit results
[Sat Jul 14 21:36:02 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 21:36:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 21:36:02 2012] Assessing source extent using major
[Sat Jul 14 21:36:02 2012] Source does appear to be extended
[Sat Jul 14 21:36:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 21:36:35 2012] XMMSAS src. selection expression = ellipse(22908.946259, 18477.967865, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 14 21:36:35 2012] Writing source region out to fullrun_pn_xmm0600690101_pi300-10000_pass1_cl_src103_src.reg
[Sat Jul 14 21:36:35 2012] Extracting stamp from image fullrun_pn_xmm0600690101_pi300-10000_cl_sm2.00.img.gz, (226, 175) - (301, 250)
[Sat Jul 14 21:36:35 2012] XMMSAS bgd. selection expression = annulus(22908.946259, 18477.967865, 1087.500000, 2175.000000, X, Y) && !ellipse(22952.719727, 17385.010452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20747.809140, 20614.572800, 423.311212, 423.311212, 0.000000, X, Y) && !ellipse(22264.323730, 16312.759613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24071.166748, 21419.311539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23944.342000, 20738.416000, 884.272025, 884.272025, 0.000000, X, Y) && !ellipse(22129.851420, 20446.967000, 376.488011, 376.488011, 0.000000, X, Y) && !ellipse(23747.550537, 20233.976364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23134.068848, 18984.057602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22230.801331, 18287.708466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22761.605408, 17947.447876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21727.850000, 17515.052000, 1645.600047, 1645.600047, 0.000000, X, Y) && !ellipse(22484.489380, 16849.335724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21107.602000, 16516.266000, 1631.072047, 1631.072047, 0.000000, X, Y) && !ellipse(21646.045731, 15875.165649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21164.942474, 15785.004837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20442.558121, 15630.472839, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 21:36:35 2012] Writing fullrun_pn_xmm0600690101_pi300-10000_pass1_cl_src103.gif
[Sat Jul 14 23:01:03 2012] Mean detx,y = (-1557.19, -6539.26) 
[Sat Jul 14 23:01:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 23:01:26 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 23:01:26 2012] Setting source spectrum file to fullrun_pn_xmm0600690101_pi300-10000_pass1_cl_src103_src_b10.pi.gz
[Sat Jul 14 23:01:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600690101_pi300-10000_pass1_cl_src103_bgd.pi.gz
[Sun Jul 15 00:26:17 2012] Not generating rmf since there are only 93 counts
[Sun Jul 15 00:26:17 2012] rmf not generated due to insufficient counts
[Sun Jul 15 01:40:32 2012] Updating aperture counts using extracted products
[Sun Jul 15 01:40:32 2012] Error reading totcts from fullrun_pn_xmm0600690101_pi300-10000_pass1_cl_src103_src_b10.pi.gz
[Sun Jul 15 01:40:34 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 01:40:34 2012] Using photon index=1.80, rate=0.00212, arf fullrun_pn_xmm0600690101_pi300-10000_pass1_cl_src103.arf
[Sun Jul 15 01:40:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 01:40:34 2012] Updating source flux to 8.2e-15
[Sun Jul 15 01:41:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting