[Sat Jul 14 03:58:32 2012] Detection parameters:
  Position = (111.4, 244.2) = 20 24 14.54 11 28 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 290.7 +/- 22.9
  Background counts = 36.6
  Rate = 0.004 +/- 0.0003

[Sat Jul 14 03:58:33 2012] Off-axis axis estimate = 14.12'
[Sat Jul 14 10:43:58 2012] Using EEF radius (= 13.49 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 10:43:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 14 10:43:58 2012] Initial guess for spatial extent in simple fitting = 13.49"
[Sat Jul 14 10:43:58 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.945
[Sat Jul 14 10:43:58 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 13.49"
[Sat Jul 14 12:32:04 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_src10.ximg exists
[Sat Jul 14 12:32:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_src10.csv
[Sat Jul 14 12:32:04 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Jul 14 12:32:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_src10.csv
[Sat Jul 14 12:32:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 12:32:04 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Jul 14 12:32:04 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Jul 14 12:32:04 2012] Fit fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Jul 14 12:32:55 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.262334 pixels away
[Sat Jul 14 12:32:55 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 12:32:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 12:32:55 2012] Assessing source extent using major
[Sat Jul 14 12:32:55 2012] Source does appear to be extended
[Sat Jul 14 12:32:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 20:22:40 2012] Using EEF radius (= 13.49 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 20:22:40 2012] Initial guess for spatial extent in simple fitting = 13.49"
[Sat Jul 14 20:22:40 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.945
[Sat Jul 14 20:22:40 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 13.49"
[Sat Jul 14 21:35:38 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_src10.ximg exists
[Sat Jul 14 21:35:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_src10.csv
[Sat Jul 14 21:35:38 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Jul 14 21:35:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_src10.csv
[Sat Jul 14 21:35:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 21:35:39 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Jul 14 21:35:39 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Jul 14 21:35:39 2012] Fit fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Jul 14 21:36:16 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.262334 pixels away
[Sat Jul 14 21:36:16 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 21:36:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 21:36:16 2012] Assessing source extent using major
[Sat Jul 14 21:36:16 2012] Source does appear to be extended
[Sat Jul 14 21:36:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 01:04:28 2012] XMMSAS src. selection expression = ellipse(9642.330383, 21198.407791, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 15 01:04:28 2012] Writing source region out to fullrun_mos2_xmm0600690101_pi300-10000_pass1_cl_src5_src.reg
[Sun Jul 15 01:04:28 2012] Extracting stamp from image fullrun_mos2_xmm0600690101_pi300-10000_cl_sm2.00.img.gz, (74, 207) - (149, 282)
[Sun Jul 15 01:04:28 2012] XMMSAS bgd. selection expression = annulus(9642.330383, 21198.407791, 1087.500000, 2175.000000, X, Y)
[Sun Jul 15 01:04:28 2012] Writing fullrun_mos2_xmm0600690101_pi300-10000_pass1_cl_src5.gif
[Sun Jul 15 01:08:38 2012] Mean detx,y = (-11279.60, 9816.45) 
[Sun Jul 15 01:08:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 01:08:56 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 01:08:56 2012] Setting source spectrum file to fullrun_mos2_xmm0600690101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jul 15 01:08:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600690101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jul 15 01:34:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 15 01:34:56 2012] rmf not generated due to insufficient counts
[Sun Jul 15 01:40:36 2012] Updating aperture counts using extracted products
[Sun Jul 15 01:40:36 2012] Error reading totcts from fullrun_mos2_xmm0600690101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jul 15 01:40:36 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 01:40:36 2012] Using photon index=1.80, rate=0.00385, arf fullrun_mos2_xmm0600690101_pi300-10000_pass1_cl_src5.arf
[Sun Jul 15 01:40:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 01:40:36 2012] Updating source flux to 1e-13
[Sun Jul 15 01:41:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting