[Sat Jul 14 03:58:33 2012] Detection parameters:
  Position = (404.3, 311.6) = 20 22 47.85 11 33 29.6
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 54.6 +/- 12.3
  Background counts = 129.4
  Rate = 0.0007 +/- 0.0002

[Sat Jul 14 03:58:33 2012] Off-axis axis estimate = 7.74'
[Sat Jul 14 10:43:58 2012] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 10:43:58 2012] Initial guess for spatial extent in simple fitting = 10.30"
[Sat Jul 14 10:43:58 2012] source mask rpix=2.4, npix_max = 32, mask sum = 22, frac = 0.669
[Sat Jul 14 10:43:58 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 10.30"
[Sat Jul 14 12:32:04 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_src41.ximg exists
[Sat Jul 14 12:32:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_src41.csv
[Sat Jul 14 12:32:04 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_src41_1.ximg exists
[Sat Jul 14 12:32:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_src41.csv
[Sat Jul 14 12:32:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 12:32:05 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sat Jul 14 12:32:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src41.csv
[Sat Jul 14 12:32:05 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sat Jul 14 12:32:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src41.csv
[Sat Jul 14 12:32:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 12:32:55 2012] Spatial fit model total counts = 680.882000, observed total counts = 607.000000
[Sat Jul 14 12:32:55 2012] Poor agreement between spatial fit and data for source 41
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 14 12:32:55 2012] Source 41 is offset by -3.304837 and -7.065545 pixels which is larger than
2 X fitted extent = 1.217025 x 1.217025, not incorporating fit results
[Sat Jul 14 12:32:55 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 12:32:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 12:32:55 2012] Assessing source extent using major
[Sat Jul 14 12:32:55 2012] Source does appear to be extended
[Sat Jul 14 12:32:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 12:32:55 2012] Source is confused with source 10
[Sat Jul 14 20:22:40 2012] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 20:22:40 2012] Initial guess for spatial extent in simple fitting = 10.30"
[Sat Jul 14 20:22:40 2012] source mask rpix=2.4, npix_max = 32, mask sum = 22, frac = 0.669
[Sat Jul 14 20:22:40 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 10.30"
[Sat Jul 14 21:35:39 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_src40.ximg exists
[Sat Jul 14 21:35:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_src40.csv
[Sat Jul 14 21:35:39 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_src40_1.ximg exists
[Sat Jul 14 21:35:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_src40.csv
[Sat Jul 14 21:35:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 21:35:39 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Sat Jul 14 21:35:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src40.csv
[Sat Jul 14 21:35:40 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Sat Jul 14 21:35:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src40.csv
[Sat Jul 14 21:35:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 21:36:16 2012] Spatial fit model total counts = 676.791000, observed total counts = 607.000000
[Sat Jul 14 21:36:16 2012] Poor agreement between spatial fit and data for source 41
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 14 21:36:16 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 21:36:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 21:36:16 2012] Assessing source extent using major
[Sat Jul 14 21:36:16 2012] Source does appear to be extended
[Sat Jul 14 21:36:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 01:04:28 2012] XMMSAS src. selection expression = ellipse(35127.359222, 27062.593567, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jul 15 01:04:28 2012] Writing source region out to fullrun_mos2_xmm0600690101_pi300-10000_pass1_cl_src41_src.reg
[Sun Jul 15 01:04:28 2012] Extracting stamp from image fullrun_mos2_xmm0600690101_pi300-10000_cl_sm2.00.img.gz, (329, 237) - (479, 387)
[Sun Jul 15 01:04:28 2012] XMMSAS bgd. selection expression = annulus(35127.359222, 27062.593567, 2175.000000, 4350.000000, X, Y) && !ellipse(34569.645600, 26294.382000, 1578.528045, 1578.528045, 0.000000, X, Y) && !ellipse(34385.538727, 29339.169678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33728.254000, 31286.609600, 266.812808, 266.812808, 0.000000, X, Y) && !ellipse(34424.498627, 26651.398560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32462.641733, 25760.401458, 477.689431, 378.840964, 128.726554, X, Y) && !ellipse(33512.472800, 30065.307200, 521.998415, 246.317607, 75.138933, X, Y) && !ellipse(32427.266113, 27634.802826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34251.268043, 25232.709507, 445.900367, 231.283566, 101.678893, X, Y) && !ellipse(33015.714200, 23853.023000, 361.492810, 361.492810, 0.000000, X, Y) && !ellipse(36630.371307, 26181.187561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33991.728851, 26648.430237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34695.006287, 27080.753967, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 15 01:04:28 2012] Writing fullrun_mos2_xmm0600690101_pi300-10000_pass1_cl_src41.gif
[Sun Jul 15 01:17:54 2012] Mean detx,y = (8834.89, -6516.72) 
[Sun Jul 15 01:17:56 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 01:18:44 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 01:18:44 2012] Setting source spectrum file to fullrun_mos2_xmm0600690101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Sun Jul 15 01:18:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600690101_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Sun Jul 15 01:38:10 2012] Not generating rmf since there are only 54 counts
[Sun Jul 15 01:38:10 2012] rmf not generated due to insufficient counts
[Sun Jul 15 01:40:36 2012] Updating aperture counts using extracted products
[Sun Jul 15 01:40:36 2012] Error reading totcts from fullrun_mos2_xmm0600690101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Sun Jul 15 01:40:37 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 01:40:37 2012] Using photon index=1.80, rate=0.000724, arf fullrun_mos2_xmm0600690101_pi300-10000_pass1_cl_src41.arf
[Sun Jul 15 01:40:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 01:40:37 2012] Updating source flux to 1.7e-14
[Sun Jul 15 01:41:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting