[Sat Jul 14 03:58:33 2012] Detection parameters:
  Position = (396.2, 306.9) = 20 22 50.24 11 33 3.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.5 +/- 17.4
  Background counts = 39.5
  Rate = 0.003 +/- 0.0004

[Sat Jul 14 03:58:33 2012] Off-axis axis estimate = 7.12'
[Sat Jul 14 10:43:58 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 10:43:58 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Sat Jul 14 10:43:58 2012] source mask rpix=2.3, npix_max = 31, mask sum = 33, frac = 1.055
[Sat Jul 14 10:43:58 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 9.99"
[Sat Jul 14 12:32:04 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_src12.ximg exists
[Sat Jul 14 12:32:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_src12.csv
[Sat Jul 14 12:32:04 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_src12_1.ximg exists
[Sat Jul 14 12:32:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_src12.csv
[Sat Jul 14 12:32:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 12:32:04 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sat Jul 14 12:32:04 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Jul 14 12:32:04 2012] Fit fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sat Jul 14 12:32:55 2012] Warning, spatial fit 12 centroid is now closest to src. 10
[Sat Jul 14 12:32:55 2012] Source 26 is offset by -0.269993 and 5.599891 pixels which is larger than
2 X fitted extent = 9.304644 x 3.791968, not incorporating fit results
[Sat Jul 14 12:32:55 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 12:32:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 12:32:55 2012] Assessing source extent using major
[Sat Jul 14 12:32:55 2012] Source does appear to be extended
[Sat Jul 14 12:32:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 12:32:55 2012] Source is confused with source 10
[Sat Jul 14 20:22:40 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 20:22:40 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Sat Jul 14 20:22:40 2012] source mask rpix=2.3, npix_max = 31, mask sum = 33, frac = 1.055
[Sat Jul 14 20:22:40 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 9.99"
[Sat Jul 14 21:35:38 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_src12.ximg exists
[Sat Jul 14 21:35:38 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_src12_1.ximg exists
[Sat Jul 14 21:35:38 2012] Fit fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_src12 appears to have run properly
[Sat Jul 14 21:35:39 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sat Jul 14 21:35:39 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Jul 14 21:35:39 2012] Fit fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sat Jul 14 21:36:16 2012] Warning, spatial fit 12 centroid is now closest to src. 10
[Sat Jul 14 21:36:16 2012] Source 26 is offset by 1.565387 and 4.902190 pixels which is larger than
2 X fitted extent = 9.018391 x 2.836193, not incorporating fit results
[Sat Jul 14 21:36:16 2012] Spatial fit model total counts = 769.863000, observed total counts = 686.000000
[Sat Jul 14 21:36:16 2012] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 14 21:36:16 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 21:36:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 21:36:16 2012] Assessing source extent using major
[Sat Jul 14 21:36:16 2012] Source does appear to be extended
[Sat Jul 14 21:36:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 01:04:28 2012] XMMSAS src. selection expression = ellipse(34424.498627, 26651.398560, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 15 01:04:28 2012] Writing source region out to fullrun_mos2_xmm0600690101_pi300-10000_pass1_cl_src26_src.reg
[Sun Jul 15 01:04:28 2012] Extracting stamp from image fullrun_mos2_xmm0600690101_pi300-10000_cl_sm2.00.img.gz, (359, 269) - (434, 344)
[Sun Jul 15 01:04:28 2012] XMMSAS bgd. selection expression = annulus(34424.498627, 26651.398560, 1087.500000, 2175.000000, X, Y) && !ellipse(34569.645600, 26294.382000, 1578.528045, 1578.528045, 0.000000, X, Y) && !ellipse(34385.538727, 29339.169678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32462.641733, 25760.401458, 477.689431, 378.840964, 128.726554, X, Y) && !ellipse(32427.266113, 27634.802826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34251.268043, 25232.709507, 445.900367, 231.283566, 101.678893, X, Y) && !ellipse(36630.371307, 26181.187561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33991.728851, 26648.430237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35127.359222, 27062.593567, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(34695.006287, 27080.753967, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 15 01:04:28 2012] Writing fullrun_mos2_xmm0600690101_pi300-10000_pass1_cl_src26.gif
[Sun Jul 15 01:09:14 2012] Mean detx,y = (8527.62, -6011.56) 
[Sun Jul 15 01:09:15 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 01:09:27 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 01:09:27 2012] Setting source spectrum file to fullrun_mos2_xmm0600690101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Jul 15 01:09:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600690101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sun Jul 15 01:35:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 15 01:35:07 2012] rmf not generated due to insufficient counts
[Sun Jul 15 01:40:36 2012] Updating aperture counts using extracted products
[Sun Jul 15 01:40:36 2012] Error reading totcts from fullrun_mos2_xmm0600690101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Jul 15 01:40:36 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 01:40:36 2012] Using photon index=1.80, rate=0.00334, arf fullrun_mos2_xmm0600690101_pi300-10000_pass1_cl_src26.arf
[Sun Jul 15 01:40:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 01:40:36 2012] Updating source flux to 6.3e-14
[Sun Jul 15 01:41:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting