[Sat Jul 14 03:58:33 2012] Detection parameters:
  Position = (373.3, 318.2) = 20 22 57.03 11 33 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.4 +/- 16.1
  Background counts = 42.3
  Rate = 0.003 +/- 0.0003

[Sat Jul 14 03:58:33 2012] Off-axis axis estimate = 5.61'
[Sat Jul 14 10:43:58 2012] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 10:43:58 2012] Initial guess for spatial extent in simple fitting = 9.23"
[Sat Jul 14 10:43:58 2012] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.872
[Sat Jul 14 10:43:58 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 9.23"
[Sat Jul 14 12:32:04 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_src16.ximg exists
[Sat Jul 14 12:32:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_src16.csv
[Sat Jul 14 12:32:04 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_src16_1.ximg exists
[Sat Jul 14 12:32:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_src16.csv
[Sat Jul 14 12:32:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 12:32:04 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sat Jul 14 12:32:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sat Jul 14 12:32:04 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sat Jul 14 12:32:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sat Jul 14 12:32:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 12:32:55 2012] Source 24 is offset by 6.823840 and -2.449551 pixels which is larger than
2 X fitted extent = 2.726418 x 1.577292, not incorporating fit results
[Sat Jul 14 12:32:55 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 12:32:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 12:32:55 2012] Assessing source extent using major
[Sat Jul 14 12:32:55 2012] Source does appear to be extended
[Sat Jul 14 12:32:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 20:22:40 2012] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 20:22:40 2012] Initial guess for spatial extent in simple fitting = 9.23"
[Sat Jul 14 20:22:40 2012] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.872
[Sat Jul 14 20:22:40 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 9.23"
[Sat Jul 14 21:35:38 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_src16.ximg exists
[Sat Jul 14 21:35:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_src16.csv
[Sat Jul 14 21:35:38 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_src16_1.ximg exists
[Sat Jul 14 21:35:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_src16.csv
[Sat Jul 14 21:35:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 21:35:39 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sat Jul 14 21:35:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sat Jul 14 21:35:39 2012] fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sat Jul 14 21:35:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sat Jul 14 21:35:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 21:36:16 2012] Source 24 is offset by -6.457516 and -3.249025 pixels which is larger than
2 X fitted extent = 2.408533 x 2.408533, not incorporating fit results
[Sat Jul 14 21:36:16 2012] Spatial fit model total counts = 607.169000, observed total counts = 446.000000
[Sat Jul 14 21:36:16 2012] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 14 21:36:16 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 21:36:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 21:36:16 2012] Assessing source extent using major
[Sat Jul 14 21:36:16 2012] Source does appear to be extended
[Sat Jul 14 21:36:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 01:04:28 2012] XMMSAS src. selection expression = ellipse(32427.266113, 27634.802826, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 15 01:04:28 2012] Writing source region out to fullrun_mos2_xmm0600690101_pi300-10000_pass1_cl_src24_src.reg
[Sun Jul 15 01:04:28 2012] Extracting stamp from image fullrun_mos2_xmm0600690101_pi300-10000_cl_sm2.00.img.gz, (336, 281) - (411, 356)
[Sun Jul 15 01:04:28 2012] XMMSAS bgd. selection expression = annulus(32427.266113, 27634.802826, 1087.500000, 2175.000000, X, Y) && !ellipse(34569.645600, 26294.382000, 1578.528045, 1578.528045, 0.000000, X, Y) && !ellipse(34385.538727, 29339.169678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34424.498627, 26651.398560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32462.641733, 25760.401458, 477.689431, 378.840964, 128.726554, X, Y) && !ellipse(33512.472800, 30065.307200, 521.998415, 246.317607, 75.138933, X, Y) && !ellipse(34251.268043, 25232.709507, 445.900367, 231.283566, 101.678893, X, Y) && !ellipse(33991.728851, 26648.430237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35127.359222, 27062.593567, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(34695.006287, 27080.753967, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 15 01:04:28 2012] Writing fullrun_mos2_xmm0600690101_pi300-10000_pass1_cl_src24.gif
[Sun Jul 15 01:10:27 2012] Mean detx,y = (6166.32, -6048.66) 
[Sun Jul 15 01:10:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 01:10:46 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 01:10:46 2012] Setting source spectrum file to fullrun_mos2_xmm0600690101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sun Jul 15 01:10:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600690101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sun Jul 15 01:35:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 15 01:35:29 2012] rmf not generated due to insufficient counts
[Sun Jul 15 01:40:36 2012] Updating aperture counts using extracted products
[Sun Jul 15 01:40:36 2012] Error reading totcts from fullrun_mos2_xmm0600690101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sun Jul 15 01:40:36 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 01:40:36 2012] Using photon index=1.80, rate=0.00304, arf fullrun_mos2_xmm0600690101_pi300-10000_pass1_cl_src24.arf
[Sun Jul 15 01:40:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 01:40:36 2012] Updating source flux to 5.2e-14
[Sun Jul 15 01:41:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting