[Sat Jul 14 03:58:04 2012] Detection parameters:
  Position = (278.0, 286.9) = 20 23 25.25 11 31 36.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1628.1 +/- 50.0
  Background counts = 56.9
  Rate = 0.02 +/- 0.0007

[Sat Jul 14 03:58:05 2012] Off-axis axis estimate = 1.70'
[Sat Jul 14 09:41:46 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 09:41:46 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Jul 14 09:41:46 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Sat Jul 14 09:41:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sat Jul 14 10:43:57 2012] fullrun_mos1_xmm0600690101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 14 10:43:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600690101_pi300-10000_cl_pass0_src1.csv
[Sat Jul 14 10:43:57 2012] fullrun_mos1_xmm0600690101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 14 10:43:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600690101_pi300-10000_cl_pass0_src1.csv
[Sat Jul 14 10:43:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600690101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600690101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 10:43:57 2012] fullrun_mos1_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 14 10:43:57 2012] fullrun_mos1_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 14 10:43:57 2012] Fit fullrun_mos1_xmm0600690101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 14 12:32:44 2012] Spatial fit model total counts = 1965.080000, observed total counts = 1948.000000
[Sat Jul 14 12:32:44 2012] Offset between fit and detection position for source 8 = 0.056537 pixels
[Sat Jul 14 12:32:44 2012] 1975.776000 total counts/ 860.566000 bgd. counts: snr = 38.015838
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.056537 pixels
  Position = (278.0, 287.0) = 20 23 25.24 11 31 36.4
  Extent = 5.9 (5.6-6.3)", rotation angle = 0
  Source counts = 1115.2 +/- 44.4
  Background counts = 860.6
  Rate = 0.01 +/- 0.0006
[Sat Jul 14 12:32:44 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 12:32:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 12:32:44 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 12:32:44 2012] Source does appear to be extended
[Sat Jul 14 12:32:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 19:32:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 14 19:32:40 2012] Initial guess for spatial extent in simple fitting = 5.88"
[Sat Jul 14 19:32:40 2012] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.166
[Sat Jul 14 19:32:40 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.88"
[Sat Jul 14 20:22:39 2012] fullrun_mos1_xmm0600690101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 14 20:22:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600690101_pi300-10000_cl_pass1_src1.csv
[Sat Jul 14 20:22:39 2012] fullrun_mos1_xmm0600690101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 14 20:22:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600690101_pi300-10000_cl_pass1_src1.csv
[Sat Jul 14 20:22:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600690101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600690101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 20:22:39 2012] fullrun_mos1_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 14 20:22:39 2012] fullrun_mos1_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 14 20:22:39 2012] Fit fullrun_mos1_xmm0600690101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 14 21:36:08 2012] Spatial fit model total counts = 1963.290000, observed total counts = 1948.000000
[Sat Jul 14 21:36:08 2012] Offset between fit and detection position for source 8 = 0.001410 pixels
[Sat Jul 14 21:36:08 2012] 1973.947000 total counts/ 857.167000 bgd. counts: snr = 38.144762
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.001410 pixels
  Position = (278.0, 287.0) = 20 23 25.24 11 31 36.4
  Extent = 5.9 (5.6-6.2)", rotation angle = 0
  Source counts = 1116.8 +/- 44.4
  Background counts = 857.2
  Rate = 0.01 +/- 0.0006
[Sat Jul 14 21:36:08 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 21:36:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 21:36:08 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 21:36:08 2012] Source does appear to be extended
[Sat Jul 14 21:36:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 00:36:03 2012] Counts = 1116.780000, rescaling region sizes by 2.000000
[Sun Jul 15 00:36:03 2012] XMMSAS src. selection expression = ellipse(24138.255630, 24917.441400, 709.069220, 709.069220, 0.000000, X, Y)
[Sun Jul 15 00:36:03 2012] Writing source region out to fullrun_mos1_xmm0600690101_pi300-10000_pass1_cl_src8_src.reg
[Sun Jul 15 00:36:03 2012] Extracting stamp from image fullrun_mos1_xmm0600690101_pi300-10000_cl_sm2.00.img.gz, (237, 246) - (319, 328)
[Sun Jul 15 00:36:03 2012] XMMSAS bgd. selection expression = annulus(24138.255630, 24917.441400, 2363.564068, 4727.128136, X, Y) && !ellipse(24640.155457, 30161.063202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19857.892792, 22185.311386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19109.917938, 28618.100891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27938.015137, 19348.570557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26868.293600, 23166.957800, 368.760811, 368.760811, 0.000000, X, Y) && !ellipse(21537.931000, 25390.541200, 360.379210, 360.379210, 0.000000, X, Y) && !ellipse(25340.742240, 23139.067200, 265.967208, 265.967208, 0.000000, X, Y) && !ellipse(19946.990940, 24500.800200, 402.016012, 402.016012, 0.000000, X, Y) && !ellipse(26840.471780, 21033.437200, 239.765607, 239.765607, 0.000000, X, Y) && !ellipse(25796.939840, 26466.031600, 838.464024, 414.988812, 34.189500, X, Y) && !ellipse(26430.928000, 25700.618600, 359.014410, 359.014410, 0.000000, X, Y)
[Sun Jul 15 00:36:03 2012] Writing fullrun_mos1_xmm0600690101_pi300-10000_pass1_cl_src8.gif
[Sun Jul 15 00:36:07 2012] Mean detx,y = (265.86, -220.18) 
[Sun Jul 15 00:36:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 00:36:27 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 00:36:27 2012] Setting source spectrum file to fullrun_mos1_xmm0600690101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Jul 15 00:36:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600690101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun Jul 15 01:40:34 2012] Updating aperture counts using extracted products
[Sun Jul 15 01:40:34 2012] Error reading totcts from fullrun_mos1_xmm0600690101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Jul 15 01:40:35 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 01:40:35 2012] Using photon index=1.80, rate=0.015, arf fullrun_mos1_xmm0600690101_pi300-10000_pass1_cl_src8.arf
[Sun Jul 15 01:40:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 01:40:35 2012] Updating source flux to 1.5e-13
[Sun Jul 15 01:41:05 2012] Reading fit data from xmm0600690101/analysis//spectral/fullrun_mos1_xmm0600690101_pi300-10000_pass1_cl_src8_pl.csv
[Sun Jul 15 01:41:05 2012] Spectral fit parameter nH value = 5.93533e+20
[Sun Jul 15 01:41:05 2012] Spectral fit parameter PhoIndex value = 1.7766
[Sun Jul 15 01:41:05 2012] Failed to get F(0.3-8.0) from xmm0600690101/analysis//spectral/fullrun_mos1_xmm0600690101_pi300-10000_pass1_cl_src8_pl.csv, possibly due to different flux energy range selected
[Sun Jul 15 01:41:05 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 01:41:05 2012] Using Nh = 5.9e+20, photon index=1.78, rate=0.015, arf fullrun_mos1_xmm0600690101_pi300-10000_pass1_cl_src8.arf
[Sun Jul 15 01:41:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 01:41:05 2012] Updating source flux to 1.6e-13