[Sun Feb  5 10:05:05 2012] Detection parameters:
  Position = (294.0, 323.0) = 0 42 54.71 41 17 20.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.2 +/- 19.5
  Background counts = 87.5
  Rate = 0.01 +/- 0.002

[Sun Feb  5 10:05:06 2012] Off-axis axis estimate = 1.81'
[Sun Feb  5 10:07:29 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 10:07:29 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Sun Feb  5 10:07:29 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.837
[Sun Feb  5 10:07:29 2012] Giving source the simple spatial ID 84 for pass 0, mean size = 7.33"
[Sun Feb  5 14:54:50 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src84.ximg exists
[Sun Feb  5 14:54:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src84.csv
[Sun Feb  5 14:54:50 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src84_1.ximg exists
[Sun Feb  5 14:54:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src84.csv
[Sun Feb  5 14:54:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src84_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 14:54:52 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src84.ximg exists
[Sun Feb  5 14:54:52 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src84_1.ximg exists
[Sun Feb  5 14:54:52 2012] Fit fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src84 appears to have run properly
[Sun Feb  5 21:08:04 2012] Spatial fit model total counts = 2902.120000, observed total counts = 2896.000000
[Sun Feb  5 21:08:04 2012] Offset between fit and detection position for source 86 = 2.220000 pixels
[Sun Feb  5 21:08:04 2012] Warning, changing simple spatial fit ID from 84 to 34
[Sun Feb  5 21:08:04 2012] 2693.701000 total counts/ 2478.290000 bgd. counts: snr = 4.327049
Spatial fit parameters:
  Offset between fit and detection position for source 86 = 2.220000 pixels
  Position = (293.5, 320.9) = 0 42 54.89 41 17 11.3
  Extent = 8.8 (7.4-10.7)", rotation angle = 0
  Source counts = 215.4 +/- 51.9
  Background counts = 2478.3
  Rate = 0.01 +/- 0.004
[Sun Feb  5 21:08:05 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 21:08:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 21:08:05 2012] Assessing source extent using major axis lower bound
[Sun Feb  5 21:08:05 2012] Source does appear to be extended
[Sun Feb  5 21:08:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 21:08:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb  5 21:08:51 2012] Initial guess for spatial extent in simple fitting = 8.80"
[Sun Feb  5 21:08:51 2012] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.824
[Sun Feb  5 21:08:51 2012] Giving source the simple spatial ID 73 for pass 1, mean size = 8.80"
[Mon Feb  6 00:25:32 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src73.ximg exists
[Mon Feb  6 00:25:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src73.csv
[Mon Feb  6 00:25:32 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src73_1.ximg exists
[Mon Feb  6 00:25:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src73.csv
[Mon Feb  6 00:25:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb  6 00:25:34 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Mon Feb  6 00:25:34 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Mon Feb  6 00:25:34 2012] Fit fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src73 appears to have run properly
[Mon Feb  6 05:24:16 2012] Spatial fit model total counts = 2444.970000, observed total counts = 2444.000000
[Mon Feb  6 05:24:16 2012] Offset between fit and detection position for source 86 = 2.564150 pixels
[Mon Feb  6 05:24:16 2012] Warning, changing simple spatial fit ID from 73 to 29
[Mon Feb  6 05:24:16 2012] 2394.713000 total counts/ 2156.660000 bgd. counts: snr = 5.126050
Spatial fit parameters:
  Offset between fit and detection position for source 86 = 2.564150 pixels
  Position = (295.3, 322.7) = 0 42 54.21 41 17 19.4
  Extent = 10.3 (10.2-20.5)", rotation angle = 0
  Source counts = 238.1 +/- 48.9
  Background counts = 2156.7
  Rate = 0.02 +/- 0.003
[Mon Feb  6 05:24:16 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 05:24:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 05:24:16 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 05:24:16 2012] Source does appear to be extended
[Mon Feb  6 05:24:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 05:24:57 2012] XMMSAS src. selection expression = ellipse(25640.748000, 28028.252000, 616.128018, 616.128018, 0.000000, X, Y)
[Mon Feb  6 05:24:57 2012] Writing source region out to fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src86_src.reg
[Mon Feb  6 05:24:57 2012] Extracting stamp from image fullrun_pn_xmm0600660601_pi300-10000_cl_sm2.00.img.gz, (260, 287) - (331, 358)
[Mon Feb  6 05:24:58 2012] XMMSAS bgd. selection expression = annulus(25640.748000, 28028.252000, 1026.880030, 2053.760059, X, Y) && !ellipse(26017.867400, 29929.603400, 454.180813, 454.180813, 0.000000, X, Y) && !ellipse(23465.226400, 28940.299200, 432.160012, 432.160012, 0.000000, X, Y) && !ellipse(27763.918000, 28404.810000, 344.852010, 344.852010, 0.000000, X, Y) && !ellipse(28329.390350, 27684.202301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26090.090000, 27377.652000, 564.817616, 564.817616, 0.000000, X, Y) && !ellipse(27474.268000, 26908.592800, 4804.560138, 4804.560138, 0.000000, X, Y) && !ellipse(27757.718000, 26714.912000, 807.000023, 807.000023, 0.000000, X, Y) && !ellipse(26767.919830, 26481.341278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25471.165800, 26521.349600, 384.571211, 384.571211, 0.000000, X, Y) && !ellipse(24369.544000, 26556.047400, 432.696012, 432.696012, 0.000000, X, Y) && !ellipse(26199.110000, 26059.312000, 607.322417, 607.322417, 0.000000, X, Y) && !ellipse(24691.827637, 25744.992798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26955.514200, 25720.737800, 638.711218, 421.700012, 120.401500, X, Y) && !ellipse(23648.326800, 25733.997200, 518.736015, 518.736015, 0.000000, X, Y) && !ellipse(28247.679169, 26231.449921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25381.534200, 28988.902000, 860.968025, 860.968025, 0.000000, X, Y) && !ellipse(28442.252991, 28575.604492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23353.169830, 26449.820770, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb  6 05:24:58 2012] Writing fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src86.gif
[Mon Feb  6 06:20:48 2012] Mean detx,y = (-2573.06, -55.47) 
[Mon Feb  6 06:20:50 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 06:21:04 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 06:21:04 2012] Setting source spectrum file to fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Mon Feb  6 06:21:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src86_bgd.pi.gz
[Tue Feb  7 10:42:26 2012] Updating aperture counts using extracted products
[Tue Feb  7 10:42:26 2012] Error reading totcts from fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Tue Feb  7 10:42:28 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb  7 10:42:28 2012] Using photon index=1.80, rate=0.0165, arf fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src86.arf
[Tue Feb  7 10:42:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb  7 10:42:28 2012] Updating source flux to 5.8e-14