[Sun Feb  5 10:05:05 2012] Detection parameters:
  Position = (285.6, 236.8) = 0 42 57.95 41 11 5.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2058.1 +/- 56.3
  Background counts = 67.6
  Rate = 0.2 +/- 0.005

[Sun Feb  5 10:05:06 2012] Off-axis axis estimate = 4.57'
[Sun Feb  5 10:07:29 2012] Using EEF radius (= 8.71 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 10:07:29 2012] Initial guess for spatial extent in simple fitting = 8.71"
[Sun Feb  5 10:07:29 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.998
[Sun Feb  5 10:07:29 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 8.71"
[Sun Feb  5 14:54:50 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src67.ximg exists
[Sun Feb  5 14:54:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src67.csv
[Sun Feb  5 14:54:50 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src67_1.ximg exists
[Sun Feb  5 14:54:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src67.csv
[Sun Feb  5 14:54:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 14:54:52 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Sun Feb  5 14:54:52 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Sun Feb  5 14:54:52 2012] Fit fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Sun Feb  5 21:08:04 2012] Spatial fit model total counts = 2351.590000, observed total counts = 2357.000000
[Sun Feb  5 21:08:04 2012] Offset between fit and detection position for source 69 = 0.121442 pixels
[Sun Feb  5 21:08:04 2012] 2381.500000 total counts/ 1024.440000 bgd. counts: snr = 42.399017
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 0.121442 pixels
  Position = (285.6, 236.7) = 0 42 57.94 41 11 5.1
  Extent = 5.5 (5.3-5.8)", rotation angle = 0
  Source counts = 1357.1 +/- 48.8
  Background counts = 1024.4
  Rate = 0.09 +/- 0.003
[Sun Feb  5 21:08:05 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 21:08:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 21:08:05 2012] Assessing source extent using major axis lower bound
[Sun Feb  5 21:08:05 2012] Source does appear to be extended
[Sun Feb  5 21:08:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 21:08:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb  5 21:08:51 2012] Initial guess for spatial extent in simple fitting = 5.50"
[Sun Feb  5 21:08:51 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.723
[Sun Feb  5 21:08:51 2012] Giving source the simple spatial ID 60 for pass 1, mean size = 5.50"
[Mon Feb  6 00:25:32 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src60.ximg exists
[Mon Feb  6 00:25:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src60.csv
[Mon Feb  6 00:25:32 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src60_1.ximg exists
[Mon Feb  6 00:25:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src60.csv
[Mon Feb  6 00:25:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb  6 00:25:34 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Mon Feb  6 00:25:34 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Mon Feb  6 00:25:34 2012] Fit fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src60 appears to have run properly
[Mon Feb  6 05:24:16 2012] Warning, spatial fit 60 centroid is now closest to src. 73
[Mon Feb  6 05:24:16 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 05:24:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 05:24:16 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 05:24:16 2012] Source does appear to be extended
[Mon Feb  6 05:24:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 05:24:57 2012] Counts = 1357.060000, rescaling region sizes by 2.000000
[Mon Feb  6 05:24:57 2012] XMMSAS src. selection expression = ellipse(24798.603600, 20541.154000, 659.739619, 659.739619, 0.000000, X, Y)
[Mon Feb  6 05:24:57 2012] Writing source region out to fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src69_src.reg
[Mon Feb  6 05:24:57 2012] Extracting stamp from image fullrun_pn_xmm0600660601_pi300-10000_cl_sm2.00.img.gz, (248, 199) - (324, 275)
[Mon Feb  6 05:24:57 2012] XMMSAS bgd. selection expression = annulus(24798.603600, 20541.154000, 2199.132063, 4398.264127, X, Y) && !ellipse(25877.316046, 24501.440000, 1390.411240, 1390.411240, 0.000000, X, Y) && !ellipse(27474.268000, 26908.592800, 4804.560138, 4804.560138, 0.000000, X, Y) && !ellipse(24691.827637, 25744.992798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21867.471191, 25374.820648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22006.154800, 25036.500000, 1208.552035, 575.050417, 46.417303, X, Y) && !ellipse(28961.920200, 24622.242400, 381.505611, 381.505611, 0.000000, X, Y) && !ellipse(28304.272880, 24946.315800, 372.434411, 372.434411, 0.000000, X, Y) && !ellipse(28706.159800, 23386.627800, 425.103212, 425.103212, 0.000000, X, Y) && !ellipse(22401.017780, 22595.082800, 348.064010, 348.064010, 0.000000, X, Y) && !ellipse(21078.780400, 16063.726000, 511.734415, 511.734415, 0.000000, X, Y) && !ellipse(27711.031372, 21402.405640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27486.012329, 19918.872177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23608.652679, 19541.267273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30295.518000, 25295.406000, 1287.296037, 1287.296037, 0.000000, X, Y) && !ellipse(27213.326000, 23927.286000, 1185.392034, 1185.392034, 0.000000, X, Y) && !ellipse(23995.829400, 24114.040800, 1209.776035, 1209.776035, 0.000000, X, Y) && !ellipse(23929.686400, 21837.388200, 1432.712041, 415.236012, 127.216000, X, Y) && !ellipse(23263.330000, 20891.240000, 1213.000035, 1213.000035, 0.000000, X, Y) && !ellipse(21538.025864, 18655.536224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20686.214000, 17354.250000, 2040.272059, 677.084019, 126.698000, X, Y) && !ellipse(20050.427551, 16399.170197, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb  6 05:24:57 2012] Writing fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src69.gif
[Mon Feb  6 06:13:40 2012] Mean detx,y = (1223.87, 6445.94) 
[Mon Feb  6 06:13:42 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 06:14:18 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 06:14:18 2012] Setting source spectrum file to fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Mon Feb  6 06:14:18 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Tue Feb  7 10:42:26 2012] Updating aperture counts using extracted products
[Tue Feb  7 10:42:26 2012] Error reading totcts from fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Tue Feb  7 10:42:28 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb  7 10:42:28 2012] Using photon index=1.80, rate=0.0942, arf fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src69.arf
[Tue Feb  7 10:42:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb  7 10:42:28 2012] Updating source flux to 3.1e-13