[Sun Feb  5 10:05:04 2012] Detection parameters:
  Position = (299.8, 300.0) = 0 42 52.47 41 15 41.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3621.1 +/- 76.3
  Background counts = 115.3
  Rate = 0.3 +/- 0.006

[Sun Feb  5 10:05:06 2012] Off-axis axis estimate = 0.15'
[Sun Feb  5 10:07:29 2012] Using EEF radius (= 6.50 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 10:07:29 2012] Initial guess for spatial extent in simple fitting = 6.50"
[Sun Feb  5 10:07:29 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.005
[Sun Feb  5 10:07:29 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 6.50"
[Sun Feb  5 14:54:50 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src44.ximg exists
[Sun Feb  5 14:54:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src44.csv
[Sun Feb  5 14:54:50 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src44_1.ximg exists
[Sun Feb  5 14:54:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src44.csv
[Sun Feb  5 14:54:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 14:54:51 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Sun Feb  5 14:54:51 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Sun Feb  5 14:54:51 2012] Fit fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Sun Feb  5 21:08:04 2012] Spatial fit model total counts = 11411.800000, observed total counts = 11414.000000
[Sun Feb  5 21:08:04 2012] Offset between fit and detection position for source 45 = 1.938724 pixels
[Sun Feb  5 21:08:04 2012] Warning, changing simple spatial fit ID from 44 to 39
[Sun Feb  5 21:08:04 2012] 11751.420000 total counts/ 10282.200000 bgd. counts: snr = 14.489180
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 1.938724 pixels
  Position = (301.7, 300.4) = 0 42 51.73 41 15 42.2
  Extent = 7.5 (6.9-7.9)", rotation angle = 0
  Source counts = 1469.2 +/- 108.4
  Background counts = 10282.2
  Rate = 0.1 +/- 0.008
[Sun Feb  5 21:08:05 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 21:08:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 21:08:05 2012] Assessing source extent using major axis lower bound
[Sun Feb  5 21:08:05 2012] Source does appear to be extended
[Sun Feb  5 21:08:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 21:08:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb  5 21:08:51 2012] Initial guess for spatial extent in simple fitting = 7.46"
[Sun Feb  5 21:08:51 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.274
[Sun Feb  5 21:08:51 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 7.46"
[Mon Feb  6 00:25:32 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src38.ximg exists
[Mon Feb  6 00:25:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src38.csv
[Mon Feb  6 00:25:32 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src38_1.ximg exists
[Mon Feb  6 00:25:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src38.csv
[Mon Feb  6 00:25:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb  6 00:25:33 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Mon Feb  6 00:25:33 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Mon Feb  6 00:25:33 2012] Fit fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src38 appears to have run properly
[Mon Feb  6 05:24:16 2012] Spatial fit model total counts = 11434.100000, observed total counts = 11414.000000
[Mon Feb  6 05:24:16 2012] Offset between fit and detection position for source 45 = 0.267908 pixels
[Mon Feb  6 05:24:16 2012] Warning, changing simple spatial fit ID from 38 to 33
[Mon Feb  6 05:24:16 2012] 11998.640000 total counts/ 10411.500000 bgd. counts: snr = 15.554591
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.267908 pixels
  Position = (301.7, 300.1) = 0 42 51.73 41 15 41.0
  Extent = 7.6 (7.0-8.0)", rotation angle = 0
  Source counts = 1587.1 +/- 109.5
  Background counts = 10411.5
  Rate = 0.1 +/- 0.008
[Mon Feb  6 05:24:16 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 05:24:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 05:24:16 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 05:24:16 2012] Source does appear to be extended
[Mon Feb  6 05:24:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 05:24:56 2012] Counts = 1587.140000, rescaling region sizes by 2.000000
[Mon Feb  6 05:24:56 2012] XMMSAS src. selection expression = ellipse(26199.110000, 26059.312000, 910.983626, 910.983626, 0.000000, X, Y)
[Mon Feb  6 05:24:56 2012] Writing source region out to fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src45_src.reg
[Mon Feb  6 05:24:56 2012] Extracting stamp from image fullrun_pn_xmm0600660601_pi300-10000_cl_sm2.00.img.gz, (249, 248) - (354, 352)
[Mon Feb  6 05:24:56 2012] XMMSAS bgd. selection expression = annulus(26199.110000, 26059.312000, 3036.612087, 6073.224175, X, Y) && !ellipse(25877.316046, 24501.440000, 1390.411240, 1390.411240, 0.000000, X, Y) && !ellipse(32686.021400, 25947.189600, 431.423212, 431.423212, 0.000000, X, Y) && !ellipse(29133.625800, 26476.722200, 1082.028031, 1082.028031, 0.000000, X, Y) && !ellipse(23606.698578, 32863.083862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20086.628600, 31596.012600, 404.986412, 404.986412, 0.000000, X, Y) && !ellipse(29931.069512, 31353.919638, 491.666937, 352.144174, 0.000000, X, Y) && !ellipse(30809.208000, 30815.189000, 415.660012, 415.660012, 0.000000, X, Y) && !ellipse(24441.069600, 30460.080600, 315.450409, 315.450409, 0.000000, X, Y) && !ellipse(31971.226380, 30338.212200, 463.756013, 463.756013, 0.000000, X, Y) && !ellipse(26017.867400, 29929.603400, 454.180813, 454.180813, 0.000000, X, Y) && !ellipse(28810.051544, 29724.579041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23465.226400, 28940.299200, 432.160012, 432.160012, 0.000000, X, Y) && !ellipse(27763.918000, 28404.810000, 344.852010, 344.852010, 0.000000, X, Y) && !ellipse(28329.390350, 27684.202301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26090.090000, 27377.652000, 564.817616, 564.817616, 0.000000, X, Y) && !ellipse(27474.268000, 26908.592800, 4804.560138, 4804.560138, 0.000000, X, Y) && !ellipse(33035.281097, 26377.742035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27757.718000, 26714.912000, 807.000023, 807.000023, 0.000000, X, Y) && !ellipse(26767.919830, 26481.341278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25471.165800, 26521.349600, 384.571211, 384.571211, 0.000000, X, Y) && !ellipse(24369.544000, 26556.047400, 432.696012, 432.696012, 0.000000, X, Y) && !ellipse(30107.870000, 26684.158000, 1321.704038, 961.952028, 28.890000, X, Y) && !ellipse(30841.461900, 26879.778200, 444.144813, 444.144813, 0.000000, X, Y) && !ellipse(24691.827637, 25744.992798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26955.514200, 25720.737800, 638.711218, 421.700012, 120.401500, X, Y) && !ellipse(23648.326800, 25733.997200, 518.736015, 518.736015, 0.000000, X, Y) && !ellipse(21867.471191, 25374.820648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28247.679169, 26231.449921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22006.154800, 25036.500000, 1208.552035, 575.050417, 46.417303, X, Y) && !ellipse(28961.920200, 24622.242400, 381.505611, 381.505611, 0.000000, X, Y) && !ellipse(28304.272880, 24946.315800, 372.434411, 372.434411, 0.000000, X, Y) && !ellipse(32213.177826, 23671.167999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28706.159800, 23386.627800, 425.103212, 425.103212, 0.000000, X, Y) && !ellipse(32815.667694, 23526.381287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30621.448400, 23131.800200, 475.386414, 475.386414, 0.000000, X, Y) && !ellipse(22401.017780, 22595.082800, 348.064010, 348.064010, 0.000000, X, Y) && !ellipse(31490.457200, 22098.217400, 396.475211, 396.475211, 0.000000, X, Y) && !ellipse(27711.031372, 21402.405640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24798.603600, 20541.154000, 439.826413, 439.826413, 0.000000, X, Y) && !ellipse(27486.012329, 19918.872177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23608.652679, 19541.267273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25381.534200, 28988.902000, 860.968025, 860.968025, 0.000000, X, Y) && !ellipse(28442.252991, 28575.604492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29274.017914, 28232.930481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25640.748000, 28028.252000, 821.504024, 821.504024, 0.000000, X, Y) && !ellipse(23353.169830, 26449.820770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30295.518000, 25295.406000, 1287.296037, 1287.296037, 0.000000, X, Y) && !ellipse(27213.326000, 23927.286000, 1185.392034, 1185.392034, 0.000000, X, Y) && !ellipse(23995.829400, 24114.040800, 1209.776035, 1209.776035, 0.000000, X, Y) && !ellipse(31339.073151, 23811.138489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23929.686400, 21837.388200, 1432.712041, 415.236012, 127.216000, X, Y) && !ellipse(23263.330000, 20891.240000, 1213.000035, 1213.000035, 0.000000, X, Y)
[Mon Feb  6 05:24:56 2012] Writing fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src45.gif
[Mon Feb  6 05:58:30 2012] Mean detx,y = (-870.35, 1147.24) 
[Mon Feb  6 05:58:32 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 05:59:03 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 05:59:03 2012] Setting source spectrum file to fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Mon Feb  6 05:59:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Tue Feb  7 10:42:25 2012] Updating aperture counts using extracted products
[Tue Feb  7 10:42:25 2012] Error reading totcts from fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Tue Feb  7 10:42:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb  7 10:42:27 2012] Using photon index=1.80, rate=0.11, arf fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src45.arf
[Tue Feb  7 10:42:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb  7 10:42:27 2012] Updating source flux to 2.6e-13