[Sun Feb  5 10:05:04 2012] Detection parameters:
  Position = (380.3, 303.7) = 0 42 21.41 41 15 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1720.0 +/- 58.7
  Background counts = 68.4
  Rate = 0.2 +/- 0.005

[Sun Feb  5 10:05:06 2012] Off-axis axis estimate = 5.95'
[Sun Feb  5 10:07:29 2012] Using EEF radius (= 9.40 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 10:07:29 2012] Initial guess for spatial extent in simple fitting = 9.40"
[Sun Feb  5 10:07:29 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.882
[Sun Feb  5 10:07:29 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 9.40"
[Sun Feb  5 14:54:49 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src37.ximg exists
[Sun Feb  5 14:54:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src37.csv
[Sun Feb  5 14:54:49 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src37_1.ximg exists
[Sun Feb  5 14:54:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src37.csv
[Sun Feb  5 14:54:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 14:54:51 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sun Feb  5 14:54:51 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sun Feb  5 14:54:51 2012] Fit fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Sun Feb  5 21:08:04 2012] Warning, spatial fit 37 centroid is now closest to src. 2
[Sun Feb  5 21:08:05 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 21:08:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 21:08:05 2012] Assessing source extent using major
[Sun Feb  5 21:08:05 2012] Source does appear to be extended
[Sun Feb  5 21:08:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 21:08:05 2012] Source is confused with source 2
[Sun Feb  5 21:08:51 2012] Using EEF radius (= 9.40 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 21:08:51 2012] Initial guess for spatial extent in simple fitting = 9.40"
[Sun Feb  5 21:08:51 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.882
[Sun Feb  5 21:08:51 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 9.40"
[Mon Feb  6 00:25:32 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src31.ximg exists
[Mon Feb  6 00:25:32 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src31_1.ximg exists
[Mon Feb  6 00:25:32 2012] Fit fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src31 appears to have run properly
[Mon Feb  6 00:25:33 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Mon Feb  6 00:25:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src31.csv
[Mon Feb  6 00:25:33 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Mon Feb  6 00:25:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src31.csv
[Mon Feb  6 00:25:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb  6 05:24:16 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 13.765749 pixels away
[Mon Feb  6 05:24:16 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 05:24:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 05:24:16 2012] Assessing source extent using major
[Mon Feb  6 05:24:16 2012] Source does appear to be extended
[Mon Feb  6 05:24:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 05:24:55 2012] Counts = 1719.957764, rescaling region sizes by 2.000000
[Mon Feb  6 05:24:55 2012] XMMSAS src. selection expression = ellipse(33035.281097, 26377.742035, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Feb  6 05:24:55 2012] Writing source region out to fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src38_src.reg
[Mon Feb  6 05:24:55 2012] Extracting stamp from image fullrun_pn_xmm0600660601_pi300-10000_cl_sm2.00.img.gz, (305, 229) - (455, 379)
[Mon Feb  6 05:24:55 2012] XMMSAS bgd. selection expression = annulus(33035.281097, 26377.742035, 4350.000000, 8700.000000, X, Y) && !ellipse(25877.316046, 24501.440000, 1390.411240, 1390.411240, 0.000000, X, Y) && !ellipse(32686.021400, 25947.189600, 431.423212, 431.423212, 0.000000, X, Y) && !ellipse(29133.625800, 26476.722200, 1082.028031, 1082.028031, 0.000000, X, Y) && !ellipse(23606.698578, 32863.083862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34360.005200, 31879.498200, 458.682413, 458.682413, 0.000000, X, Y) && !ellipse(29931.069512, 31353.919638, 491.666937, 352.144174, 0.000000, X, Y) && !ellipse(30809.208000, 30815.189000, 415.660012, 415.660012, 0.000000, X, Y) && !ellipse(24441.069600, 30460.080600, 315.450409, 315.450409, 0.000000, X, Y) && !ellipse(31971.226380, 30338.212200, 463.756013, 463.756013, 0.000000, X, Y) && !ellipse(26017.867400, 29929.603400, 454.180813, 454.180813, 0.000000, X, Y) && !ellipse(28810.051544, 29724.579041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34892.891000, 29572.845800, 420.354412, 420.354412, 0.000000, X, Y) && !ellipse(36109.283200, 29157.702600, 408.657612, 408.657612, 0.000000, X, Y) && !ellipse(35129.785919, 28843.048248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35523.604000, 28191.250000, 1671.088048, 1671.088048, 0.000000, X, Y) && !ellipse(27763.918000, 28404.810000, 344.852010, 344.852010, 0.000000, X, Y) && !ellipse(28329.390350, 27684.202301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26090.090000, 27377.652000, 564.817616, 564.817616, 0.000000, X, Y) && !ellipse(27474.268000, 26908.592800, 4804.560138, 4804.560138, 0.000000, X, Y) && !ellipse(27757.718000, 26714.912000, 807.000023, 807.000023, 0.000000, X, Y) && !ellipse(26767.919830, 26481.341278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25471.165800, 26521.349600, 384.571211, 384.571211, 0.000000, X, Y) && !ellipse(24369.544000, 26556.047400, 432.696012, 432.696012, 0.000000, X, Y) && !ellipse(30107.870000, 26684.158000, 1321.704038, 961.952028, 28.890000, X, Y) && !ellipse(30841.461900, 26879.778200, 444.144813, 444.144813, 0.000000, X, Y) && !ellipse(26199.110000, 26059.312000, 607.322417, 607.322417, 0.000000, X, Y) && !ellipse(24691.827637, 25744.992798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26955.514200, 25720.737800, 638.711218, 421.700012, 120.401500, X, Y) && !ellipse(28247.679169, 26231.449921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39755.482056, 24841.883200, 413.869612, 413.869612, 0.000000, X, Y) && !ellipse(28961.920200, 24622.242400, 381.505611, 381.505611, 0.000000, X, Y) && !ellipse(28304.272880, 24946.315800, 372.434411, 372.434411, 0.000000, X, Y) && !ellipse(33664.650400, 24084.959000, 445.243213, 445.243213, 0.000000, X, Y) && !ellipse(32213.177826, 23671.167999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28706.159800, 23386.627800, 425.103212, 425.103212, 0.000000, X, Y) && !ellipse(32815.667694, 23526.381287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30621.448400, 23131.800200, 475.386414, 475.386414, 0.000000, X, Y) && !ellipse(34448.574432, 22258.206543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33703.567860, 22153.016600, 372.740811, 372.740811, 0.000000, X, Y) && !ellipse(31490.457200, 22098.217400, 396.475211, 396.475211, 0.000000, X, Y) && !ellipse(27711.031372, 21402.405640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35228.307800, 20222.233600, 388.150411, 388.150411, 0.000000, X, Y) && !ellipse(24798.603600, 20541.154000, 439.826413, 439.826413, 0.000000, X, Y) && !ellipse(27486.012329, 19918.872177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31506.777000, 19269.499200, 390.405611, 390.405611, 0.000000, X, Y) && !ellipse(23608.652679, 19541.267273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38992.885406, 34859.432251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34429.609558, 28837.021332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25381.534200, 28988.902000, 860.968025, 860.968025, 0.000000, X, Y) && !ellipse(28442.252991, 28575.604492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29274.017914, 28232.930481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25640.748000, 28028.252000, 821.504024, 821.504024, 0.000000, X, Y) && !ellipse(35068.017175, 28025.027831, 1287.440037, 1287.440037, 0.000000, X, Y) && !ellipse(30295.518000, 25295.406000, 1287.296037, 1287.296037, 0.000000, X, Y) && !ellipse(27213.326000, 23927.286000, 1185.392034, 1185.392034, 0.000000, X, Y) && !ellipse(23995.829400, 24114.040800, 1209.776035, 1209.776035, 0.000000, X, Y) && !ellipse(31339.073151, 23811.138489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40078.062256, 23540.949432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23929.686400, 21837.388200, 1432.712041, 415.236012, 127.216000, X, Y) && !ellipse(23263.330000, 20891.240000, 1213.000035, 1213.000035, 0.000000, X, Y)
[Mon Feb  6 05:24:55 2012] Writing fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src38.gif
[Mon Feb  6 05:47:22 2012] Mean detx,y = (4376.01, -2681.08) 
[Mon Feb  6 05:47:25 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 05:48:47 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 05:48:47 2012] Setting source spectrum file to fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Mon Feb  6 05:48:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Tue Feb  7 03:24:58 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Feb  7 03:24:58 2012] rmf not generated due to insufficient counts
[Tue Feb  7 10:42:25 2012] Updating aperture counts using extracted products
[Tue Feb  7 10:42:25 2012] Error reading totcts from fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Tue Feb  7 10:42:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb  7 10:42:27 2012] Using photon index=1.80, rate=0.152, arf fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src38.arf
[Tue Feb  7 10:42:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb  7 10:42:27 2012] Updating source flux to 4.2e-13
[Tue Feb  7 10:48:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting